• 디지털콘텐츠학회 논문지
• /
• 제9권2호
• /
• pp.269-276
• /
• 2008

근래에 우리의 전통문화에 대한 관심이 높아짐에 따라 문화재를 보존, 보수 그리고 복원하는 사업이 활발히 진행되고 있다. 이러한 여러 계획 중에서 가장 규모가 큰 것이 경복궁 복원계획이며 1989년이래로 지속적인 단계별 복원공사가 진행 중이다. 이를 위하여 각종 건축물에 대한 실측조사가 진행되었고 이를 기록하여 향후 유지보수를 위한 기초자료로 남기고 있다. 본 논문에서는 이러한 자료들을 바탕으로 일반인들이 우리의 전통건축물의 내부 모습뿐 아니라 각종 부재들과 건축 과정을 쉽게 이해할 수 있도록 3D 컴퓨터 그래픽 기법을 이용하였다. 즉 경복궁의 중심 건물인 근정전을 3D 그래픽으로 제작하고 건축 과정을 동영상으로 제작 하였다. 이러한 디지털 컨텐츠를 통해 외국인이나 일반인이 한국의 전통 건축양식을 쉽게 이해할 수 있도록 하는 것을 목적으로 한다.

• Journal of Ecology and Environment
• /
• 제31권3호
• /
• pp.213-223
• /
• 2008

The increasing area of abandoned rice fields could provide new opportunities for wetland restoration in Asia. However, it is unknown how quickly or completely abandoned rice fields will recover from agricultural disturbances. We assessed water quality and plant community succession in abandoned rice fields with different hydrology in a mountain valley to understand the effects of hydrological regime on recovery. Water level, soil redox potential, water quality, plant composition, and primary production were measured. The sites, coded as D6, N13, and N16, had been recovering for 6, 13, and 16 years by 2006. N13 and N16 have been recovering naturally whereas D6 has been drained with a nearby dike and was tilled in 2001. The typical hydroperiods of D6, N13, and N16 were no surface water, permanently flooded, and seasonally flooded, respectively. The major change in vegetation structure of both D6 and N13 was the replacement of herbaceous species by woody species. Drawdown accelerated this change because Salix koreensis grew better in damp conditions than in flooded conditions. Phragmites japonica reduced plot-level plant species richness. The removal efficiency of $NH_4-N$, $NO_3-N$, and $PO_4-P$ from water varied seasonally, ranging between -78.8 to 44.3%, 0 to 97.5%, and -26.0 to 44.4%, respectively. In summary, abandoned rice fields quickly became suitable habitat for native wetland plant species and improved regional water quality. Variation among our sites indicates that it is likely possible to manage abandoned rice fields, mostly through controlling hydrology, to achieve site-specific restoration goals.

• 한국기록관리학회:학술대회논문집
• /
• 한국기록관리학회 2019년도 춘계학술대회
• /
• pp.43-47
• /
• 2019

문화유산 분야에서 일찍이 문화유산을 보존 복원하기 위한 목적으로, 3차원(3D) 디지털 기술을 이용하여 문화유산의 원형을 기록하여 왔다. 하지만 문화유산 3차원(3D) 디지털 기록은 점군 데이터 취득부터 3차원(3D) 모델 제작까지 복잡한 단계를 거쳐 생산되는 대용량의 디지털 기록으로, 장기 보존 문제를 피할 수 없다. 국제적으로 관련 논의가 활발히 진행 중에 있으며, 국내외 선행연구와 사례 분석을 바탕으로 문화유산 3차원(3D) 디지털 기록의 보존 방향을 제언하고자 한다.

• The Journal of Advanced Prosthodontics
• /
• 제9권4호
• /
• pp.265-270
• /
• 2017

PURPOSE. This study is to evaluate the internal fit of the crown manufactured by CAD/CAM milling method and 3D printing method. MATERIALS AND METHODS. The master model was fabricated with stainless steel by using CNC machine and the work model was created from the vinyl-polysiloxane impression. After scanning the working model, the design software is used to design the crown. The saved STL file is used on the CAD/CAM milling method and two types of 3D printing method to produce 10 interim crowns per group. Internal discrepancy measurement uses the silicon replica method and the measured data are analyzed with One-way ANOVA to verify the statistic significance. RESULTS. The discrepancy means (standard deviation) of the 3 groups are $171.6\;(97.4){\mu}m$ for the crown manufactured by the milling system and 149.1 (65.9) and $91.1\;(36.4){\mu}m$, respectively, for the crowns manufactured with the two types of 3D printing system. There was a statistically significant difference and the 3D printing system group showed more outstanding value than the milling system group. CONCLUSION. The marginal and internal fit of the interim restoration has more outstanding 3D printing method than the CAD/CAM milling method. Therefore, the 3D printing method is considered as applicable for not only the interim restoration production, but also in the dental prosthesis production with a higher level of completion.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권2호
• /
• pp.41-51
• /
• 2014

This paper describes a method to estimate the noise power using the minimum statistics approach, which was originally proposed for audio processing. The proposed minimum statistics-based method separates a noisy image into multiple frequency bands using the three-level discrete wavelet transform. By assuming that the output of the high-pass filter contains both signal detail and noise, the proposed algorithm extracts the region of pure noise from the high frequency band using an appropriate threshold. The region of pure noise, which is free from the signal detail part and the DC component, is well suited for minimum statistics condition, where the noise power can be extracted easily. The proposed algorithm reduces the computational load significantly through the use of a simple processing architecture without iteration with an estimation accuracy greater than 90% for strong noise at 0 to 40dB SNR of the input image. Furthermore, the well restored image can be obtained using the estimated noise power information in parametric image restoration algorithms, such as the classical parametric Wiener or ForWaRD image restoration filters. The experimental results show that the proposed algorithm can estimate the noise power accurately, and is particularly suitable for fast, low-cost image restoration or enhancement applications.

• 대한전자공학회논문지SP
• /
• 제46권6호
• /
• pp.132-145
• /
• 2009

본 논문에서는 임의의 조명 상황에서 왜곡된 영상을 JND(Just noticeable difference)와 경계 보호 평탄화 필터(edge-preserving smoothing filter)를 사용하여 자동적으로 휘도 및 색상을 복원하는 기법을 제안한다. 제안된 방법은 최적의 휘도 보상, 선명한 색상 복원, 휘도 보상 시 발생되는 여러 가지 문제점의 최소화, 자동화된 매개변수 추정 그리고 하드웨어 구현을 위한 고속화 등을 목적으로 하고 있다. 이를 위하여 본 논문에서는 후광효과(HALO)나 노이즈 증폭 등의 눈에 거슬리는 결함을 제거하기 위하여 경계 보호 평탄화 필터의 효용성에 대해 보인다. 또한 제안된 색상 복원 함수는 인간시각에 근거해 자연스러운 색상의 복원과 왜곡된 색상의 보정을 수행한다. 자동화된 처리를 위하여 영상의 통계적 분석과 JND를 이용해 적합한 매개변수를 찾으며 모든 상수는 미리 정의되어 사용된다. 또한 터치스크린 카메라를 이용한 관심영역(ROI : Region of Interest) 기반 매개변수 추정기법을 사용하여 역광 사진 보정을 좀 더 효율적으로 수행한다. 객관적 평가를 위해 CMC, CIEde2000, PSNR, SSIM, 그리고 3D CIELAB 색역을 기존의 연구나 상업 제품들과 비교하였다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제10권4호
• /
• pp.78-84
• /
• 1996

본 논문에서는 초음파센서 배열과 신경회로망 및 불변모멘트 벡터를 이용하여 물체의 위치이동에 무관한 3차원 물체인식과 복원을 연구함으로서 추차관리 시스템의 차종인식 응용가능성에 대하여 검토하였다. 초음파센서 배열로부터 얻어진 16$\times$8 픽셀의 데이터를 이용하여 물체의 불변모멘트 벡터를 계산하고 이를 SCL(Simple Competitive Leverning)신경회로망에 입력하여 3차원 물체를 분류하였으며, 저해상도인 16$\times$8 픽셀의 물체정보를 SCL 수정형 신경회로망에 입력하여 32$\times$32 픽셀로 해상도를 향상시켜 3차원 물체복원을 하였다. 물체의 위치가 변하여도 불변모멘트 벡터는 일정한 값을 유지하였고, 학습 후 인식율은 학습데이터의 경우는98[%]이고 시험데이터의 경우 95[%]이었으며, 3차원 32$\times$32 픽셀의 고해상도 물체정보로 복원하였다. 실험결과로부터 신경회로망과 연계된 초음파 센서는 차량의 감지뿐만 아니라 차종의 구분에도 응용가능할 것으로 생각된다.

• Ecology and Resilient Infrastructure
• /
• 제6권1호
• /
• pp.1-11
• /
• 2019

본 연구는 생태 물길 복원 조성에 따른 어류 군집종에 미치는 영향을 파악하기 위하여 물리 서식처 분석을 수행하였다. 대상 어종은 피라미, 쉬리, 참갈겨니, 돌고기, 줄납자루, 밀어, 묵납자루, 꾸구리, 가는돌고기로 선정하였으며, 총 9개 어종으로 달천 내 서식하는 어류 중 95%를 차지한다. 흐름 분석은 2차원 모형인 River2D 모형을 사용하였으며, 서식처 분석은 서식처 적합도 곡선을 이용하는 서식처 적합도 모형을 사용하였다. 생태 물길 복원은 하도 내 위치한 돌보 철거 및 여울-소 구조 조성과 하상고 및 하폭의 변화를 통하여 조성하였다. 그 결과 생태 물길 복원 조성을 통하여 최적의 환경 생태 유량 조건 ($Q=7.0m^3/s$)에서 총 9종 군집종의 가중가용면적을 약 16% 향상시키는 것으로 나타났다. 이를 통하여 생태 물길 복원 조성이 하천 내 서식하는 다양한 군집종에 대하여 매우 유용한 방법임을 확인할 수 있다.

• Journal of International Society for Simulation Surgery
• /
• 제1권1호
• /
• pp.13-15
• /
• 2014

Nowadays, with advanced 3D printing techniques, the custom-made implant can be manufactured for the patient. Especially in skull reconstruction, it is difficult to design the implant due to complicated geometry. In large defect, an autograft is inappropriate to cover the defect due to donor morbidity. We present the process of manufacturing the 3D custom-made implant for skull reconstruction. There was one patient with skull defect repaired using custom-made 3D titanium implant in the plastic and reconstructive surgery department. The patient had defect of the left parieto-temporal area after craniectomy due to traumatic subdural hematoma. Custom-made 3D titanium implants were manufactured by Medyssey Co., Ltd. using 3D CT data, Mimics software and an EBM (Electron Beam Melting) machine. The engineer and surgeon reviewed several different designs and simulated a mock surgery on 3D skull model. During the operation, the custom-made implant was fit to the defect properly without dead space. The operative site healed without any specific complications. In skull reconstruction, autograft has been the treatment of choice. However, it is not always available and depends on the size of defect and donor morbidity. As 3D printing technique has been advanced, it is useful to manufacture custom-made implant for skull reconstruction.

• The Journal of Advanced Prosthodontics
• /
• 제13권3호
• /
• pp.144-151
• /
• 2021

PURPOSE. The purpose of this in vitro study was to investigate the wear resistance and surface roughness of three interim resin materials, which were subjected to chewing simulation. MATERIALS AND METHODS. Three interim resin materials were evaluated: (1) three-dimensional (3D) printed (digital light processing type), (2) computer-aided design and computer-aided manufacturing (CAD/CAM) milled, and (3) conventional polymethyl methacrylate interim resin materials. A total of 48 substrate specimens were prepared. The specimens were divided into two subgroups and subjected to 30,000 or 60,000 cycles of chewing simulation (n = 8). The wear volume loss and surface roughness of the materials were compared. Statistical analysis was performed using one-way analysis of variance and Tukey's post-hoc test (α=.05). RESULTS. The mean ± standard deviation values of wear volume loss (in mm³) against the metal abrader after 60,000 cycles were 0.10 ± 0.01 for the 3D printed resin, 0.21 ± 0.02 for the milled resin, and 0.44 ± 0.01 for the conventional resin. Statistically significant differences among volume losses were found in the order of 3D printed, milled, and conventional interim materials (P<.001). After 60,000 cycles of simulated chewing, the mean surface roughness (Ra; ㎛) values for 3D printed, milled, and conventional materials were 0.59 ± 0.06, 1.27 ± 0.49, and 1.64 ± 0.44, respectively. A significant difference was found in the Ra value between 3D printed and conventional materials (P=.01). CONCLUSION. The interim restorative materials for additive and subtractive manufacturing digital technologies exhibited less wear volume loss than the conventional interim resin. The 3D printed interim restorative material showed a smoother surface than the conventional interim material after simulated chewing.