• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.171-174
• /
• 2004

In order to improve the damage tolerance of the conventional laminated composites, three­dimensional fiber structures incorporated with stitching yams have been utilized in this study. From the newly developed process termed as TAPIS(TApe Placement Incorporated with Stitching), carbon/epoxy composites have been fabricated. Two-dimensional composites with the same stacking sequence as 3D counterparts have also been fabricated for the property comparison. To examine the damage resistance performance the low speed drop weight impact test has been adopted. For the assessment of damage after the impact loading, specimens were subjected to C-scan nondestructive inspection compression after impact(CAI) were also conducted to evaluate residual compressive strength. Although the damage area of 3D composites was greatly reduced$(30-40\%)$ compared with that of 2D composites, the CAI strength did not show drastic improvement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.301-304
• /
• 2003

Nowadays, hydration heat analysis using FEM is common in thermal crack control of concrete structure. Many kinds of general FEM programs for hydration heat analysis are used in practice. But there are some problems in this using. In this study hydration heat analysis of wall according to placement length are performed. In this results we could get two conclusions. First, general structures like wall having general geometry and construction condition have similar behavior. So it is not necessary to analysis thermal crack in every case. Second, the results of 2D analysis is possible to be applied instead of those of 3D analysis because the results of 2D analysis is similar to 3D analysis in long wall having about 15~18m or over length at 3m height.

• ETRI Journal
• /
• 제40권6호
• /
• pp.759-773
• /
• 2018

Uncore components such as on-chip memory systems and on-chip interconnects consume a large amount of energy in emerging embedded applications. Few studies have focused on next-generation analytical models for future chip-multiprocessors (CMPs) that simultaneously consider the impacts of the power consumption of core and uncore components. In this paper, we propose a convex-optimization approach to design heterogeneous uncore architectures for embedded CMPs. Our convex approach optimizes the number and placement of memory banks with different technologies on the memory layer. In parallel with hybrid memory architecting, optimizing the number and placement of through silicon vias as a viable solution in building three-dimensional (3D) CMPs is another important target of the proposed approach. Experimental results show that the proposed method outperforms 3D CMP designs with hybrid and traditional memory architectures in terms of both energy delay products (EDPs) and performance parameters. The proposed method improves the EDPs by an average of about 43% compared with SRAM design. In addition, it improves the throughput by about 7% compared with dynamic RAM (DRAM) design.

• 한국CDE학회논문집
• /
• 제20권4호
• /
• pp.348-356
• /
• 2015

It is important to devise methods for assisting dentists to consistently determine implant positions and directions and to accurately perform drilling tasks during dental implant surgery. In this paper, we propose a novel approach to tooth implant placement planning which deals with the determination of the positions and directions of multiple implant fixtures for a set of missing mandibular teeth and suggests the selection of the sizes and types of the implant fixtures. We combine Korean standard data in the sizes and positions of human teeth with the patient specific 3D models of mandibular jawbones, nerve curves, and neighboring teeth around the missing teeth in order to determine the positions and directions of the implant fixtures for the missing teeth. Using the geometric and spatial information of the jawbones, the teeth and the implant fixtures, we can construct the 3D models of surgical guide stents which are crucial to perform drilling tasks with ease and accuracy. Adopted in 3D simulation of dental implant placement, the approach can provide surgeon students with good educational contents. We also expect that, with further work, the approach can be used as a useful tool to plan for dental implant surgery.

• 정보처리학회논문지A
• /
• 제19A권2호
• /
• pp.77-84
• /
• 2012

프로세서의 성능을 효율적으로 증가시키기 위한 기법 중 하나로 명령어 수준의 병렬성을 높이는 추론적 수행(Speculative execution)이 사용되고 있다. 추론적 수행 기법의 효율성을 결정하는 가장 중요한 핵심 요소는 분기 예측기의 정확도이다. 하지만, 높은 예측율을 보장하는 복잡한 구조의 분기 예측기를 최근 주목 받고 있는 3차원 구조 멀티코어 프로세서에 적용하는데 있어서는 발열 현상이 큰 장애요소가 될 것으로 예측된다. 본 논문에서는 3차원 구조 멀티코어 프로세서에서 발생할 수 있는 분기 예측기의 높은 발열 문제를 해결하기 위해 두 가지 기법을 제시하고, 이에 대한 효율성을 상세하게 분석하고자 한다. 첫번째 기법은 분기 예측기의 온도가 임계 온도 이상으로 올라가는 경우 분기 예측기의 동작을 일시적으로 정지시키는 동적 온도 관리 기법이고, 두번째 기법은 3차원 구조 멀티코어 프로세서의 각 층 별로 온도를 고려하여 서로 다른 복잡도를 지닌 분기 예측기를 차등 배치하는 기법이다. 두 가지 기법 중에서 복잡도를 고려한 차등 배치 기법은 평균 $87.69^{\circ}C$의 온도를 나타내는 반면, 동적 온도 관리 기법은 평균 $89.64^{\circ}C$의 온도를 나타내었다. 그리고, 각 층에서 발생하는 온도 변화율을 각 기법에 대하여 비교한 결과, 동적 온도 관리 기법의 온도 변화율은 평균 $17.62^{\circ}C$을 나타내었고 복잡도 차등 배치 기법의 온도 변화율은 평균 $11.17^{\circ}C$을 나타내었다. 이러한 온도 분석을 통하여 3차원 멀티코어 프로세서에서 분기 예측기의 온도를 제어하였을 경우, 복잡도 차등 배치 기법을 적용하는 것이 더 효율적임을 알 수 있다. 성능적인 측면을 분석한 결과, 동적 온도 관리 기법은 해당 기법을 적용하지 않았을 경우보다 평균 27.66%의 성능하락을 나타내었지만, 복잡도 차등 배치 기법은 평균 3.61%의 성능 하락만을 나타내었다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권3호
• /
• pp.275-282
• /
• 2013

Applications such as vibration isolation, gravity compensation, pick-and-place machines, etc., would benefit from (long-stroke) cylindrical/tubular permanent magnet (PM) actuators with integrated passive gravity compensation to minimize the power consumption. As an example, in component placing (pick-and-place) machines on printed circuit boards, passive devices allow the powerless counteraction of translator including nozzles or tooling bits. In these applications, an increasing demand is arising for high-speed actuation with high precision and bandwidth capability mainly due to the placement head being at the foundation of the motion chain, hence, a large mass of this device will result in high force/power requirements for the driving mechanism (i.e. an H-bridge with three linear permanent magnet motors placed in an H-configuration). This paper investigates a tubular actuator topology combined with passive gravity compensation. These two functionalities are separately introduced, where the combination is verified using comprehensive three dimensional (3D) finite element analyses.

• 화약ㆍ발파
• /
• 제9권2호
• /
• pp.3-7
• /
• 1991

The Problem of vibration Inflence to housing Construction fields has arised at the begining of 1970, at That time I used Lion(VM -l2B) which recorded only dB Demension. On the 1980's I have been used lnstantel made blastemate(DS-477), modern Instrument for measuring speed, Acc, frequency and placement. but The most of Jobsite used Lion I Carried out the empirical equation of conversion dB to cm /sec as follows. Single free face : dB = 140PPV + 30 double free face : dB = 143PPV + 20 Above equation Could apply on Rock type 3(soft rock)

• 한국안전학회지
• /
• 제32권5호
• /
• pp.168-178
• /
• 2017

In order to prevent major and chemical accidents, some of the plants which would like to install and operate hazard chemicals handling facilities must submit Off-site Consequence Analysis due to recent arisen leak accidents since 2015. A lot of chemical industrials choose gas detectors as mitigation equipment to early detect gas vapor. The way of placement of gas detectors has two methods; Code-based Design(CBD) and Performance-based Design. The CBD has principles for gas detectors to be installed with consideration for the place that is expected to accumulate gas, and the leak locations according to legal standards and technical guidelines, and has a possibility to be unable to detect by these rules to locate gas detectors by vapor density information. The PBD has two methods; a Geographic Method and Scenario based Method. The Scenario-based Method has been suggested to make up for the Geographic Coverage Method. This Scenario-based Method draw the best optimum placement of gas detectors by considering leak locations, leak speed information, leak directions and etc. However, the domestic placement guidelines just refers to the CBD. Therefore, this study is to compare existing placement location of gas detectors by the domestic CBD with placement locations, coverages and the number of gas detectors in accordance with the Scenario-based Method. Also this study has measures for early detecting interest of Vapor Cloud and suitable placement of gas detectors to prevent chemical accidents. The Phast software was selected to simulate vapor cloud dispersion to predict the consequence. There are two cases; an accident hole size of leak(8 mm) from API which is the highst accident hole size less than 24.5 mm, and a normal leak hole size from KOSHA Guide (1.8 mm). Detect3D was also selected to locate gas detectors efficiently and compare CBD results and PBD results. Currently, domestic methods of gas detectors do not consider any risk, but just depend on domestic code methods which lead to placement of gas detectors not to make personnels recognize tolerable or intolerable risks. The results of the Scenario-based Method, however, analyze the leak estimated range by simulating leak dispersion, and then it is able to tell tolerable risks. Thus it is considered that individuals will be able to place gas detectors reasonably by making objectives and roles flexibly according to situations in a specific plant.

• 한국정보통신학회논문지
• /
• 제11권5호
• /
• pp.875-881
• /
• 2007

최근 멀티미디어 분야에서 새로운 수익모델로 주목받고 있는 PPL(Product Placement)을 활용하여 멀티미디어 콘텐츠 화면의 주목도를 분석하였다. 이를 위해 컴퓨터 화면을 9사분면으로 분할한 후 각각의 위치에 2D, 3D 숫자 정지 영상, 숫자 부분 동영상, 동영상 등을 배치하여 영상의 유형과 위치에 따라 사용자의 주목도에 어떠한 변화가 있는가에 관해 연구하였다. 분석 결과 2D 숫자 정지 영상과 동영상의 경우엔 5사분면에 높은 주목도를 나타냈으며, 3D 숫자 정지영상과 동영상의 경우 역시 일관성 있게 5사분면에 높은 주목도를 나타냈다. 특히 정지영상 내 동영상이 존재하는 부분 동영상의 경우엔 동영상이 존재하는 분면에 압도적인 주목도를 나타냈다. 이는 영상의 노출형태가 사용자의 주목도에 유의미한 영향을 미치는 것으로 정지영상보다는 동영상 형태의 노출이 사용자의 주목효과(attention of effects)를 높일 수 있는 것을 의미한다. 이 같은 연구결과는 멀티미디어 콘텐츠 화면에서의 PPL 제작 시 어떤 위치에 PPL을 배치해야 사용자의 주목도를 극대화할 수 있는가에 대한 문제를 해결하는데 기여할 수 있을 것으로 사료된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권4호
• /
• pp.301-308
• /
• 2007

Purpose: This study was performed to compare and evaluate the effect of recipient site depths and diameters of the drills on the primary stability of implant in pig's ribs. Materials and methods: An intact pig's rib larger than 8 mm in width and 20 mm in height; RBM(resorbable blasting media) surface blasted ${\phi}3.75mm$ and 8.0 mm long USII Osstem Implants (Osstem Co., Korea) were used. To measure the primary stability, $Periotest^{(R)}$ (Simens AG, Germany) and $Osstell^{TM}$ (Model 6 Resonance Frequency Analyser: Integration Diagnostics Ltd., Sweden) were used. They were divided into 6 groups according to its recipient site formation method: D3H3, D3H5, D3H7, D3.3H3, D3.3H5, D3.3H7. Each group had, as indicated, 10 implants placed, and total 60 implants were used. The mean value was obtained by 4-time measurements each on mesial, distal, buccal, and lingual side perpendicular to the long axis of the implant using $Periotest^{(R)}$ and $Osstell^{TM}$. For statistical analysis one-way ANOVA was used to compare the mean value of each group, and the correlation between placement depths and the primary stability, and that of measuring instruments was analyzed using SPSS 12.0. Results: The primary stability of the implants increased as the placement depths increased (p<0.05), and showed a proportional relationship (p<0.01). The primary stability increased when the diameter of the recipient site was smaller than that of the implant but with no statistical significance. There was a strong correlation between $Osstell^{TM}$ and $Periotest^{(R)}$ (p<0.01). Conclusion: These results suggest that increasing the placement depth of implants enhances the primary stability of implant.