• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2009

In this paper, we propose a method that applies Vector Fitting (VF) technique to the equivalent circuit model for RF passive components. These days wireless communication system is getting smaller and smaller. So EMI/EMC is an issue in RF. We can solve PI/SI (Power Integrity/Signal Integrity) that one of EMI/EMC problem apply IFFT for 3D EM simulation multiple with input signal. That is time consuming task. Therefore equivalent circuit model using RF passive component is important. VF schemes are implemented to obtain the rational functions. S parameters of the equivalent circuit model is compared to those of EM simulation in case of the microstrip line structure.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.281-284
• /
• 2009

In this paper, we propose a method that applies Adaptive Frequency Sampling(AFS) technique to the equivalent circuit model for RF passive components. Thes days wireless communication system is getting smaller and smaller. So EMI/EMC is an issue in RF. We can solve PI(Power Integrity)/SI(Signal Integrity) that one of EMI/EMC problem apply IFFT for 3D EM simulation multiple with input signal. That is time comuming task. Therefore equivalent circuit model using RF passive component is important. AFS schemes are implemented to obtain the rational functions. S parameters of the equivalent circuit moldel is compared to those of EM simulation in case of the microstrip line structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.137.2-137
• /
• 2001

We have been developed an intelligent mobile robot with an artificial olfactory function to recognize odours and to track odour source location. This mobile robot also has been installed an engine for speech recognition and synthesis, and is controlled by wireless communication. An artificial olfactory system based on array of 7 gas sensors has been installed in the mobile robot for odour recognition, and 11 gas sensors also are located in the bottom of robot to track odour sources. 3 optical sensors are also included in the intelligent mobile robot, which is driven by 2 D.C. motors, for clash avoidance in a way of direction toward an odour source. Throughout the experimental trails, it is confirmed that the intelligent mobile robot is capable of not only the odour recognition using artificial neural network algorithm, but also the tracking odour source using the step-by-step approach method ...

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.3
• /
• pp.136-145
• /
• 2006

Two major processing technologies of GaAs HBT and pHEMT have been released in production at Win Semiconductors corp. to address the strong demands of power amplifiers and switches for both handset and WLAN communications markets. Excellent performance with low processing cost and die shrinkage features is reported from the manufactured MMICs. With the stringent tighter manufacturing quality control WIN has successfully become one of the major pure open foundry house to serve the communication industries. The advancing of both technologies to include E/D-pHEMTs and BiHEMTs likes for multifunctional integration of PA, LNA, switch and logics is also highlighted.

• Electronics and Telecommunications Trends
• /
• v.21 no.3 s.99
• /
• pp.1-10
• /
• 2006

차세대 이동통신에 의한 새로운 정보통신 환경 실현은 21세기의 산업구조에도 막대한 영향을 주어서 대변혁을 가져올 것이다. 4세대 이동통신의 실현에 의한 정보통신환경의 Broadband화, Ubiquitous화, Mobile & Wireless화에 의해 주요한 산업으로 크게 확대되고, 융합.발전할 것으로 기대되고 있다. IMT-Advanced 이동통신 기술은 고속이동 환경에서 최대 100Mbps, 고정 또는 저속이동 환경에서 최대 1Gbps의 데이터전송속도로 비대칭/대칭적 패킷 서비스와 방송 서비스를 포함한 다양한 서비스를 IP기반으로 통합 제공하는 기술을 의미하며, IMT-Advanced 시스템뿐만 아니라 다양한 무선통신 시스템과 통합되는 형태로 실현될 것으로 예상된다. 본 고에서는 차세대 이동통신기술 동향과 국내외 개발 동향, 표준화 동향 등을 간략히 살펴보고자 한다. 특히, 차세대 이동통신 기술은 셀룰러 이동통신, 차세대 WLAN, 차세대 WPAN, SDR 등을 중심으로 살펴보고자 한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.185-186
• /
• 2017

Even large construction projects of nuclear power plant construction and production data is increasing dramatically due to the introduction of ICT technologies, such as 3D scanning technology, wireless communication technology, virtual construction management technology. There are various attributes and types of data to be produced and managed because the documents generated by the contract method are different from the cost processing method. According to the requirements of the international nuclear bid, it is required to present the cost that is calculated based on resource quantity. This research considers ways in which the cost management based on the resource quantity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1105-1111
• /
• 2006

In this paper, using low-temperature co-fired ceramic(LTCC) based system-in-package(SiP) technology, a very compact power amplifier LTCC module was designed, fabricated, and then characterized for 60 GHz wireless transmitter applications. In order to reduce the interconnection loss between a LTCC board and power amplifier monolithic microwave integrated circuits(MMIC), bond-wire transitions were optimized and high-isolated module structure was proposed to integrate the power amplifier MMIC into LTCC board. In the case of wire-bonding transition, a matching circuit was designed on the LTCC substrate and interconnection space between wires was optimized in terms of their angle. In addition, the wire-bonding structure of coplanar waveguide type was used to reduce radiation of EM-fields due to interconnection discontinuity. For high-isolated module structure, DC bias lines were fully embedded into the LTCC substrate and shielded with vias. Using 5-layer LTCC dielectrics, the power amplifier LTCC module was fabricated and its size is $4.6{\times}4.9{\times}0.5mm^3$. The fabricated module shows the gain of 10 dB and the output power of 11 dBm at P1dB compression point from 60 to 65 GHz.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.223-229
• /
• 2023

This papart proposes single pole double throw (SPDT) switch with six-stage radial stub resonators in the 3.6~4.0 GHz band. The switch was simulated using ADS (Advanced Design Software), a design tool for the wireless communication circuits, and evaluated on a pcb substrate. The measurement results of the radial SPDT switch showed an average 90 dB isolation, and 1.5 dB insertion loss. This isolation characteristic was 20 dB superior to higher than those laboratory or commercial products reported thus far. The proposed SPDT switch is applicable to multi-band RF front-end systems, such as WiMAX, LTE/5G, Wi-Fi, and HyperLAN.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.2
• /
• pp.233-238
• /
• 2015

In this paper, we proposed that immersive audio effect method using the effective noise to improve engagement in free-viewpoint TV(FTV) service. In the basketball court, we monitored the frequency spectrums by acquiring continuous audio data of players and referee using shotgun and wireless microphone. By analyzing this spectrum, in case that users zoomed in, we determined whether it is effective frequency or not. Therefore when users using FTV service zoom in toward the object, it is proposed that we need to utilize unnecessary noise instead of removing that. it will be able to be useful for an immersive audio implementation of FTV.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1050-1058
• /
• 2005

This paper presents how to design and implement a very compact, cost effective and broad band receiver module for IEEE 802.16 FWA(Fixed Wireless Access) in the 40 GHz band. The presented receiver module is fabricated in a multi-layer LTCC(Low Temperature Cofired Ceramic) technology with cavity process to achieve excellent electrical performances. The receiver consists of two MMICs, low noise amplifier and sub-harmonic mixer, an embedded image rejection filter and an IF amplifier. CB-CPW, stripline, several bond wires and various transitions to connect each element are optimally designed to keep transmission loss low and module compact in size. The LTCC is composed of 6 layers of Dupont DP-943 with relative permittivity of 7.1. The thickness of each layer is 100 um. The implemented module is $20{\times}7.5{\times}1.5\;mm^3$ in size and shows an overall noise figure of 4.8 dB, an overall down conversion gain of 19.83 dB, input P1 dB of -22.8 dBm and image rejection value of 36.6 dBc. Furthermore, experimental results demonstrate that the receiver module is suitable for detection of Digital TV signal transmitted after up-conversion of $560\~590\;MHz$ band to 40 GHz.