• Transactions on Electrical and Electronic Materials
• /
• v.18 no.1
• /
• pp.16-20
• /
• 2017

A RF-MEMS (radio-frequency microelectromechanical-system) based DPDT (double pole double throw) switch for the Ku band has been designed and analyzed for this article. The switch topology is based on the FG-CPW (finite ground-coplanar waveguide) configuration of a microstrip-transmission line. An FEM-based multiphysics solver is used for the evaluation of the spring constant, stress distribution, and pull-in voltage regarding the requirements of the switch-beam unit. The electromagnetic performance of the switch is investigated for a $675{\mu}m$ thick silicon substrate. For the operational frequency of 14.5 GHz, an insertion loss better than -0.3 dB, a return loss better than -40 dB, and input/output- and output-port isolations better than -35 dB are achieved for the switching unit.

• Journal of Hydrogen and New Energy
• /
• v.28 no.5
• /
• pp.465-470
• /
• 2017

Sulfonated fluorinated block copolymers having diphenyl units were mixed with the sulfonated cationic conductive polymers at an optimum mixing ratio to form hybrid membranes for fuel cells and their characteristics were studied. 2D and 3D AFM topology analysis confirmed that the number of hydrophilic units in the hybrid membrane was improved. Through the FE-SEM, the microstructure of the hybrid membrane implied hydrogen bonding and pi-pi interactions, and EDAX confirmed carbon, oxygen, sulfur, and fluorine. The thermogravimetric analysis showed that the hybrid membrane was thermally stable and the hydrophilicity of the hybrid membrane was increased by the contact angle of water droplets. As a result, it was confirmed that the cation conductivity increased by a factor of 1.8 times as the number of acidic domains in the hybrid film increased.

• ETRI Journal
• /
• v.39 no.1
• /
• pp.1-12
• /
• 2017

In this paper, we present a new approach for the progressive compression of three-dimensional (3D) mesh geometry using redundant frame dictionaries and sparse approximation techniques. We construct the proposed frames from redundant linear combinations of the eigenvectors of a combinatorial mesh Laplacian matrix. We achieve a sparse synthesis of the mesh geometry by selecting atoms from a frame using matching pursuit. Experimental results show that the resulting rate-distortion performance compares favorably with other progressive mesh compression algorithms in the same category, even when a very simple, sub-optimal encoding strategy is used for the transmitted data. The proposed frames also have the desirable property of being able to be applied directly to a manifold mesh having arbitrary topology and connectivity types; thus, no initial remeshing is required and the original mesh connectivity is preserved.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.102-109
• /
• 1999

Reverse engineering is a technique that helps designers to quickly generate computer interpretable data from existing physical objects. It can be used for generating CAD data from a mechanical part of high precision, or generating computer animation characters from physical mock-ups. We developed a low precision reverse engineering system that is composed of surface/solid generation software and a contact type commercial 3D digitizer. A unique point sampling procedure has been devised to easily form solid topology from the sampled data. It was also shown that STL data for rapid prototyping was successfully generated from the solid.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.582-588
• /
• 2012

In this paper, a highly miniaturized and performed UWB bandpass filter has been newly designed and implemented by embedding all the passive elements into a multi-layered PCB substrate with high dielectric $SrTiO_3$ composite film for 3.1 - 4.75 GHz compact UWB system applications. The high dielectric composite film was utilized to increase the capacitance densities and quality factors of capacitors embedded into the PCB. In order to reduce the size of the filter and avoid parasitic EM coupling between the embedded filter circuit elements, it was designed by using a $3^{rd}$ order Chebyshev circuit topology and a capacitive coupled transformation technology. Independent transmission zeros were also applied for improving the attenuation of the filter at the desired stopbands. The measured insertion and return losses in the passband were better than 1.68 and 12 dB, with a minimum value of 0.78 dB. The transmission zeros of the measured response were occurred at 2.2 and 5.15 GHz resulting in excellent suppressions of 31 and 20 dB at WLAN bands of 2.4 and 5.15 GHz, respectively. The size of the fabricated bandpass filter was $2.9{\times}2.8{\times}0.55(H)mm^3$.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.634-637
• /
• 1997

This paper is on the research and development of new SIV(Static Inverter) using IGBT(Insulated Gate Bipolar Transistor) semiconductor for a wide range of electric railway applications. For the simplification and higher controllability, the direct PWM control method with 3level inverter topology was adopted. In the new SIV system, the cost as well as bulk and weight was appreciably reduced about 40% lower than those of conventional SIV, the electrical efficiency was increased above 95% and the audible noise level was less than 65dB. In addition, the THD(Total Harmonic Distortion) factor was below 5% and the voltage fluctuation on a transient state was below 10%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.499-505
• /
• 2018

Most of 3D indoor spatial data recently constructed by many projects merely focus on the visualization rather than geospatial information applications. The 3D indoor data for visualization in 3DS or COLLADA format are based on triangular mesh representation. In order to implement meaningful applications, we need however more meaningful information in 3D indoor spatial data than visualization data in triangular meshes. For this reason, an OGC (Open Geospatial Consortium) standard, called IndoorGML(Indoor Geographic Markup Language) was published to meet the requirements on 3D indoor spatial data for several geospatial applications for indoor space more than simple visualization. It means that it becomes a critical functional requirement to convert triangular mesh representation in 3DS or COLLADA to IndoorGML. In this paper we propose a framework of the conversion, which consists of geometric, topological, and semantic construction of data from triangular meshes. An experiment carried out to validate the proposed framework is also presented in the paper.

• Journal of the Korea Computer Graphics Society
• /
• v.7 no.4
• /
• pp.1-8
• /
• 2001

3D mesh metamorphosis (morphing) deals with two input polyhedral objects and generates an animation in which the source mesh gradually changes to the target through in-between meshes. The basic and common idea of previous mesh morphing techniques can be summarized as the construction and interpolation of a metamesh. However, an approach based on a metamesh has fundamental limitations of complicated in-between meshes and no topology (connectivity) changes in a metamorphosis. This paper presents a novel approach for 3D mesh morphing, which is not based on a metamesh and overcomes the limitations of previous work. The approach simultaneously interpolates the topology and geometry of input meshes. With the approach, an in-between mesh contains only the vertices from the source and target meshes. Since no additional vertices are introduced, the in-between meshes are much simpler than those generated by previous techniques.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.11
• /
• pp.1111-1116
• /
• 2011

In this paper, a 60 GHz bidirectional active phase shifter with 130 nm CMOS is presented by replacing CMOS passive switchs in switched-line type phase shifter with Common Gate Amplifier(bidirectional amplifier). Bidirectional active phase shifter is composed of bidirectional amplifier blocks and passive delay line network blocks. The suitable topology of bidirectional amplifier block is CGA(Common Gate Amplifier) topology and matching circuits of input and output are symmetrical due to design same characteristic of it's forward and reverse way. The direction(forward and reverse way) and amplitude of amplification can be controlled by only one bias voltage($V_{DS}$) using combination bias circuit. And passive delay line network blocks are composed of microstrip line. An 1-bit phase shifter is fabricated by Dongbu HiTek 1P8M 130-nm CMOS technology and simulation results present -3 dB average insertion loss and respectively 90 degree and 180 degree phase shift at 60 GHz.

• Journal of Broadcast Engineering
• /
• v.13 no.6
• /
• pp.962-965
• /
• 2008

2-D shape descriptors, which are vectors representing characteristics of shapes, enable comparison and classification of shapes and are mainly applied to image and 3-D model retrieval. Existing descriptors have limitations that they only describe shapes of single closed contours or lack in precision, making it difficult to be applied to shapes with multiple contours. Therefore, in this paper, we propose a new shape descriptor called Multi-Curvature-Scale Space that can be applied to shapes with multiple contours. Specifically, we represent the topology of the sub-contours in the multi-contour along with Curvature-Scale Space descriptors to represent the shapes of each sub-contours. Also, by allowing the weight of each component to be controlled when computing the distance between descriptors the weight, we deal with ambiguities in measuring similarity between shapes. Results of various experiments that prove the effectiveness of proposed descriptor are presented.