• 한국항공우주학회지
• /
• 제50권4호
• /
• pp.277-285
• /
• 2022

뉴스페이스 시대를 대표하는 소형위성 분야에서 발사기회에 대한 수요가 크게 증가하고 있다. 이를 위한 소형위성 전용 발사서비스를 합리적인 가격에 제공하는 것은 많은 스타트업 기업들이 추구하는 새로운 비즈니스 모델이 되고 있으며, 여기에는 저비용 부품과 대량생산, 최적화된 제작 공정이 결합된 비용 절감을 위한 혁신적인 솔루션들이 요구되고 있다. 이러한 흐름 속에서 우리나라에서도 한국항공우연구원에서 제3차 우주개발 진흥 기본계획에 따라 누리호를 통해 개발된 액체로켓엔진 기술을 기반으로 2단형 소형발사체 개발에 대비하여 핵심기술 및 비용절감 기술들을 개발하기 위한 선행기술 연구에 착수하였다. 본 논문에서는 소형위성을 위한 혁신적이며 가격 경쟁력을 가지는 것을 목표로 하는 2단형 소형발사체의 개념을 소개하고, 스테이징 설계 및 2단형 발사체의 전기체 구성안을 포함한 임무설계 결과를 기술하였다.

• The Journal of Advanced Prosthodontics
• /
• 제16권1호
• /
• pp.38-47
• /
• 2024

PURPOSE. This study aims to evaluate the accuracy of different shade selection techniques and determine the matching success of crown restorations fabricated using digital shade selection techniques. MATERIALS AND METHODS. Teeth numbers 11 and 21 were prepared on a typodont model. For the #11 tooth, six different crowns were fabricated with randomly selected colors and set as the target crowns. The following four test groups were established: Group C, where the visual shade selection was performed using the Vita 3D Master Shade Guide and the group served as the control; Group Ph, where the shade selection was performed under the guidance of dental photography; Group S, where the shade selection was performed by measuring the target tooth color using a spectrophotometer; and Group I, where the shade selection was performed by scanning the test specimens and target crowns using an intraoral scanner. Based on the test groups, 24 crowns were fabricated using different shade selection techniques. The ΔE values were calculated according to the CIEDE2000 (2:1:1) formula. The collected data were analyzed by means of a one-way analysis of variance. RESULTS. For the four test groups (Groups C, Ph, S, and I), the following mean ΔE values were obtained: 2.74, 3.62, 2.13, and 3.5, respectively. No significant differences were found among the test groups. CONCLUSION. Although there was no statistically significant difference among the shade selection techniques, Group S had relatively lower ΔE values. Moreover, according to the test results, the spectrophotometer shade selection technique may provide more successful clinical results.

• 대한치과기공학회지
• /
• 제46권1호
• /
• pp.1-7
• /
• 2024

Purpose: The goal of this study was to determine the clinical acceptability of various cement space settings for the marginal and internal fit of a zirconia core manufactured using additive manufacturing. Methods: The maxillary right incisor served as the master model. After scanning the maxillary right incisor with a dental 3D (three-dimensional) scanner, the stereo lithography file was created using different cement space settings of 40, 120, and 200 ㎛ using computer-aided design software (Dental System 2018; 3Shape). The marginal and internal fit of the 3 groups were determined using the silicon replica technique. Measurement points were divided into the following three categories: margin, axial wall, and incisal. To ensure more accurate measurements, these three measurement points were divided into 8 points. The Shapiro-Wilk, one-way ANOVA, and Tukey's honestly significant difference test (for all tests α=0.05) were the statistical analyses that were included in the study. Results: The CS (cement space)-200 group had better marginal and internal fit than the CS-40 and CS-120 groups, and there were statistically significant differences at the marginal and incisal points, except for the axial wall points. CS-200 group, both marginal and internal fit were within 120 ㎛, which is the clinically acceptable value. Conclusion: This study suggests that a 200 ㎛ cement space setting is ideal for optimal marginal and internal fit of 3D-printed ceramic crowns.

• 대한치과보철학회지
• /
• 제38권2호
• /
• pp.242-254
• /
• 2000

Accurate impression is very important to achieve desirable prosthesis and there are many factors in taking a good impression. For example, types of impression material, types of impression tray, impression taking methods and so on. Recently individual tooth tray technique is accepted as obtaining good impression that can be applied to multiple abutment impression, heavy salivated patient, to minimize the effect of natural teeth s undercuts and to reduce pain during cord packing procedures. The purpose of this study was to compare the accuracy according to materials and forms of the individual tooth tray which is clinically applied nowadays. Used materials in experiment were divided into 3 types (acrylic resin. $Futar^{(R)}$ occlusion. $Blu-mousse^{(R)}$) and forms were divided into 2 types (forming occlusal vent hole or not and forming marginal vent space or not). Stone master model from impression body and metal master model were measured by $X-PLAN360d^{(R)}$ to compare occlusal surface discrepancy and marginal discrepancy. The results were as follows: 1. In comparison of occlusal surface discrepancy and marginal discrepancy according to materials, groups with three materials showed no statistical difference 2. In comparison of occlusal surface discrepancy and marginal discrepancy according to occlusal vent hole, groups with occlusal vent hole showed significantly less marginal discrepancy than groups with no occlusal vent hole(p<0.05). 3. In comparison of occlusal surface discrepancy and marginal discrepancy according to 0.5mm-marginal-vent-space, groups with no 0.5mm-marginal-vent-space showed significantly less marginal discrepancy than groups with 0.5mm-marginal-vent-space (p<0.05). In summary these results suggest that individual tooth tray made of 3 types of materials with occlusal vent hole and individual tooth tray made of acrylic resin with no marginal vent space showed good accuracy of impression. In addition, individual tooth tray which is made of bite registration materials may be more useful because of advantage in facility and timesaving aspect of fabrication.

• 디지털콘텐츠학회 논문지
• /
• 제5권1호
• /
• pp.22-27
• /
• 2004

밀폐 및 차폐 공간을 갖는 핫셀에서 사용후핵연료와 같은 고방사선 물질을 취급하고 있으며, 핵주기시설에서 마스터-슬레이브 매니퓰레이터는 원격취급장비로서 널리 사용되고 있다. 본 연구에서는 차세대관리공정의 디지털 목업을 구축하고 원격유지보수를 위한 매니퓰레이터의 작업영역 및 작업분석을 수행하였다. 실제 환경과 동일한 가상 작업환경을 갖는 디지털 목업은 3차원 그래픽으로 모델링된 공정장치 및 원격 취급장비들로 구성된다. 모델링된 매니퓰레이터는 기구학 및 동작범위에 대한 속성을 부여되고 외부 입력장치는 space ball을 사용하여 매니퓰레이터의 동작을 구현하였다. 또한 Tele-operation 인터페이스를 사용하여 6축 외부 입력장치와 연계한 시스템을 개발하였으며 외부 입력에 따른 매니퓰레이터의 동작에 대한 동기는 만족할 만한 응답을 보였다. 이는 가상환경에서 작업자 교육을 위한 시스템 개발에 유용할 것이다.

• 한국주조공학회지
• /
• 제21권5호
• /
• pp.290-295
• /
• 2001

We fabricated test samples containing various shape elements and surface roughness checking points for the jewelry cast master patterns by employing the 3D computer aided design (CAD), selective laser sintering (SLS) rapid prototype (RP) with the DuraForm powders. We varied the alignment angle from $0^{\circ}$ to $10^{\circ}$ at a given layer thickness of 0.08 and 0.1mm, respectively, in RP operation. Dimensions of the shape elements as well as values of surface roughness are characterized by an optical microscope and a contact-scanning profilometer. Surface roughness values of the top and vertical face increased as the alignment angle increased, while the other roughness values and shape elements variation were not depending on the alignment angle. The resolution of the shape realization was enhanced as the layer thickness became smaller. The minimum diameter of the hole, common in jewelry design, was 1.2 mm, and the shrinkage became 12% at the 1.6 mm-diameter hole, Our results implied that we face down the proposed design elements with $0^{\circ}$ alignment angle, and consider the shrinkage effect of each shape element in DuraForm RP jewelry modeling.

• 대한치과교정학회지
• /
• 제44권2호
• /
• pp.69-76
• /
• 2014

Objective: This study aimed to evaluate the accuracy and precision of polyurethane (PUT) dental arch models fabricated using a three-dimensional (3D) subtractive rapid prototyping (RP) method with an intraoral scanning technique by comparing linear measurements obtained from PUT models and conventional plaster models. Methods: Ten plaster models were duplicated using a selected standard master model and conventional impression, and 10 PUT models were duplicated using the 3D subtractive RP technique with an oral scanner. Six linear measurements were evaluated in terms of x, y, and z-axes using a non-contact white light scanner. Accuracy was assessed using mean differences between two measurements, and precision was examined using four quantitative methods and the Bland-Altman graphical method. Repeatability was evaluated in terms of intra-examiner variability, and reproducibility was assessed in terms of interexaminer and inter-method variability. Results: The mean difference between plaster models and PUT models ranged from 0.07 mm to 0.33 mm. Relative measurement errors ranged from 2.2% to 7.6% and intraclass correlation coefficients ranged from 0.93 to 0.96, when comparing plaster models and PUT models. The Bland-Altman plot showed good agreement. Conclusions: The accuracy and precision of PUT dental models for evaluating the performance of oral scanner and subtractive RP technology was acceptable. Because of the recent improvements in block material and computerized numeric control milling machines, the subtractive RP method may be a good choice for dental arch models.

• 한국도서관정보학회지
• /
• 제40권3호
• /
• pp.97-117
• /
• 2009

장서개발정책은 도서관 및 정보센터에 있어서의 장서개발의 특징과 범주, 우선순위 등을 규정하는 장서관리 업무의 마스터플랜이다. 도서관은 장서개발정책을 통하여 수집대상 장서의 범위, 수집의 우선순위 및 구입 수준 등에 대한 명확한 원칙을 설정하여야 한다. 이 연구에서는 국가단위 디지털도서관 장서개발정책 수립의 전단계로서 국립디지털도서관의 디지털장서개발정책 기본모형을 연구하여, 국가적 디지털장서개발정책의 필수 요소들을 도출하고 향후 디지털장서개발정책의 일반적 지침을 정립하고자 하였다. 이를 위하여 국내외의 전자자원개발정책 사례들을 조사 분석하여 국가단위 디지털도서관에 적합한 독립형 장서개발정책의 설정을 제안하고, 국가단위 디지털도서관이 수집 대상으로 하는 정보자원의 유형과 범위, 수집의 우선순위를 제시하여, 구입 수준, 라이선스 등에 관한 내용에 대한 원칙과 국가적 디지털 정보자원 개발의 체계적 수행을 위한 필수요소들을 도출하였다.

• 지구물리와물리탐사
• /
• 제13권1호
• /
• pp.40-50
• /
• 2010

연결성이 좋지 않은 노두, 주향 경사 등의 지질 구조선을 연결하여 지질도를 작성하는 과정은 지질학자의 주관적인 견해를 배제하기 어렵다. 따라서 이러한 지질도는 좁은 지역들에서 나타나는 노두의 복잡한 공간적 분포를 이용하여 해석하게 된다. 또한, 물리탐사 자료를 이용하여 부족한 지질구조 정보를 보완하는 연구들이 수행되고 있으나, 물리탐사 자체가 가지는 역산해의 비유일성 및 각 지질 구조간의 물성 차이에 대한 불확실성으로 인하여 많은 제한점을 갖고 있다. 이번 연구에서 제안하는 방법은 예비 지질 모델 구현에 이용될 수 있는 물리탐사 자료 해석을 통해 획득된 구조 경계 정보와 지형학 자료의 삼점 해석 결과를 이용하여 주향 경사와 같은 지질 구조 정보를 제공할 수 있다. 이를 통하여 추정된 지질 정보들이 지질 조사를 통해 획득된 정보와 결합되기 위해서는 공간 규모 측면에서의 호환 가능성이 검증되어야 하며, 검증된 자료들은 평면상의 자료로 구성되어 지질학자들이 지질도를 작성하는 과정의 초기 자료로 이용되어진다. 따라서 해석된 지질도는 추정된 지질 정보와 공간적 구조적으로 부합되어져야 한다. 이 연구에서 개발된 알고리즘은 캐나다 뉴브런즈윅주 배서스트 광산 부근 두 지역의 습곡구조에 적용하여 해석하였다.

• The Journal of Advanced Prosthodontics
• /
• 제10권5호
• /
• pp.354-360
• /
• 2018

PURPOSE. To compare and analyze trueness and precision of provisional crowns made using stereolithography apparatus and subtractive technology. MATERIALS AND METHODS. Digital impressions were made using a master model and an intraoral scanner and the crowns were designed with CAD software; in total, 22 crowns were produced. After superimposing CAD design data and scan data using a 3D program, quantitative and qualitative data were obtained for analysis of trueness and precision. Statistical analysis was performed using normality test combined with Levene test for equal variance analysis and independent sample t-test. Type 1 error was set at 0.05. RESULTS. Trueness for the outer and inner surfaces of the SLA crown (SLAC) were $49.6{\pm}9.3{\mu}m$ and $22.5{\pm}5.1{\mu}m$, respectively, and those of the subtractive crown (SUBC) were $31.8{\pm}7.5{\mu}m$ and $14.6{\pm}1.2{\mu}m$, respectively. Precision values for the outer and inner surfaces of the SLAC were $18.7{\pm}6.2{\mu}m$ and $26.9{\pm}8.5{\mu}m$, and those of the SUBC were $25.4{\pm}3.1{\mu}m$ and $13.8{\pm}0.6{\mu}m$, respectively. Trueness values for the outer and inner surfaces of the SLAC and SUBC showed statistically significant differences (P<.001). Precision for the inner surface showed significance (P<.03), whereas that for the outer surface showed no significance (P<.58). CONCLUSION. The study demonstrates that provisional crowns produced by subtractive technology are superior to crowns fabricated by stereolithography in terms of accuracy.