• 제목/요약/키워드: 3D Data Structure

검색결과 1,175건 처리시간 0.039초

샌드위치형 GFRP 아치의 구조적 거동 및 현장 적용성 (Structural Behavior of Sandwich Type GFRP Arch and Field Applicability)

  • 황대원;김광우;김용성;연규석
    • 한국농공학회논문집
    • /
    • 제60권2호
    • /
    • pp.85-93
    • /
    • 2018
  • This study investigated the structural behavior and field applicability of sandwich type GFRP arches with polymer mortar in core. As a result, in case of crack loading and failure loading, total strains at crown were the highest; the fracture strain at crown was 0.01690, which is 4.2 times greater than the fracture strain (0.004) of cement concrete. The 3 % deflection load was 17.42 kN, the flexural strength was $163.98{\times}10^{-3}GPa$, and the flexural elastic modulus was 11.884 GPa. From load-deflection relationship up to 3.5 % deflection, 3D analysis results and experimental values were observed to be almost identical. It was considered reasonable to set a deflection rate limit to be 3 % for structural safety purpose. The standard external flexural strength of semicircular arch used in this study was approximately 2.64 times higher than that of hume pipe (2 type standard) and tripled composite pipe. The external pressure strength at fracture was approximately 1.57 times higher than that of hume pipe. It was confirmed that the implementing semicircular arch had mechanically more advantage than the circular pipe. Optimum member thickness was 8~53 mm according to arch radius of 450~1,800 mm and cover depth of 2~10 m. It was found that the larger strength could be obtained even if the thickness of member was smaller than that of concrete structure. In field application study, figures and equations were derived for obtaining applicable cover depth and optimum member thickness according to loading conditions. These would be useful data for design and manufacture of sandwich type semicircular arch.

Co-expression of Gamma-Aminobutyrate Aminotransferase and Succinic Semialdehyde Dehydrogenase Genes for the Enzymatic Analysis of Gamma-Aminobutyric Acid in Escherichia Coli

  • So, Jai-Hyun;Lim, Yu-Mi;Kim, Sang-Jun;Kim, Hyun-Ho;Rhee, In-Koo
    • Journal of Applied Biological Chemistry
    • /
    • 제56권2호
    • /
    • pp.89-93
    • /
    • 2013
  • Gamma-aminobutyric acid (GABA) aminotransferase (gabT) and succinic semialdehyde dehydrogenase (gabD) genes from Pseudomonas fluorescens KCCM 12537 were cloned into a single pETDuet-1 vector and co-expressed in Escherichia coli BL21(DE3) simultaneously. The mixture of both enzymes, called GABase, is the key enzyme for the enzymatic analysis of GABA. The molecular mass of the GABA aminotransferase and succinic semialdehyde dehydrogenase were determined to be 52.8 and 46.7 kDa following computations performed with the pI/Mw program, respectively. The GABase activity between pH 6.0 and 9.0 for 24 h at $4^{\circ}C$ remained over 75%, but under pH 6.0 decreased rapidly. The GABase activity between 25 and $35^{\circ}C$ by the treatment at pH 8.6 for 30 min remained over 80%, but over $35^{\circ}C$ decreased rapidly. When the activity against GABA was defined as 100%, the purified GABase activity against 5-aminovaleric acid having a similar structure to GABA showed 47.7% and GABase activity against ${\beta}$-alanine, ${\varepsilon}$-amino-n-caproic acid, $_L$-ornithine, $_L$-lysine, and $_L$-aspartic acid showed between 0.3 to 2.3%. The GABA content was analyzed with this co-expressed GABase, compared with the other GABase which was available commercially. As a result, the content of GABA extracted from brown rice, dark brown rice, and black rice were $26.4{\pm}3.5$, $40.5{\pm}4.7$ and $94.7{\pm}9.3{\mu}g/g$, which were similar data of other GABase in the error ranges.

상황(Phellinus linteus) 배양 균사체의 2차 대사산물에 대한 화학적 연구 (Secondary Metabolites from the Mycelial Culture Broth of Phellinus linteus)

  • 송경식;조수묵;고경수;한만우;유익동
    • Applied Biological Chemistry
    • /
    • 제37권2호
    • /
    • pp.100-104
    • /
    • 1994
  • 상황(상황(桑黃); Phellinus linteus) 균사체 배양액의 ethyl acetate 가용성 분획으로부터 silica gel column chromatography 및 preparative thin layer chromatography를 이용하여 6개의 화합물을 분리, 정제하였다. 화합물 1은 표준품과의 비교에 의하여 succinic acid, 화합물 2는 $^1H-NMR$ 및 EI-MS로부터 p-hydroxyphenylacetic acid methyl ester로 동정되었으며, 화합물 3은 $^1H-NMR$과 EI-MS에 의하여 p-hydroxybenzaldehyde로, 화합물 4와 6은 각종 NMR data와 MS data 및 이들의 아세틸 유도체의 spectral data로부터 각각 2-hydroxymethyl-5-methoxy-methylfuran 및 2,5-dihydroxymethylfuran으로 동정되었다. 또한, 화합물 5는 $^1H-NMR$ data와 EI-MS에서의 m/z 179의 molecular ion peak로부터 N-acetyltyramine으로 추정되었으며 이 구조는 무수초산과 tyramine을 이용한 합성에 의하여 최종적으로 확인되었다.

  • PDF

데이터베이스를 이용한 가스산업시설의 안전관리정보시스템 구축 (Development of Safety Management Information System for Gas Industries Using Database)

  • 엄성인;김성빈;김윤화;백종배;김인원;고재욱
    • 한국가스학회지
    • /
    • 제2권2호
    • /
    • pp.48-54
    • /
    • 1998
  • 본 연구에서는 주 시스템이라고 할 수 있는 안전관리정보시스템(SMIS Ver 1.0, Safety Management Information System)과 이에 대한 자료 관리를 위한 부 시스템(subsystem)인 데이터베이스들을 개발하였다. 기업의 안전관리 정보화는 관리적인 측면과 기술적인 측면이 함께 고려되어야 하나 본 연구의 안전관리정보시스템은 안전기술에 대한 정보화를 위해 기술적인 측면의 관련 요소들을 크게 4가지 모듈로 구분하여 구성하였다. 이들을 상호 연관시켜서 가스산업의 안전정보를 효율적으로 운영하고, 위험성을 평가하며, 그 결과를 안전운전지침이나 비상계획 수립에 반영할 수 있게 하였다. 그리고 안전관리정보시스템을 지원 할 수 있는 사고관련 자료, 물질자료 및 장치관련 자료 등에 대하여 3개의 모듈로 데이터베이스를 구성하였다. 이를 통하여 현장에 분산되어 있던 자료를 입력 검색하게 함으로써 보다 체계적으로 자료를 관리할 수 있게 하였다. 또한 개발된 프로그램을 사례적용을 통하여 검증한 결과, 자료의 검색 및 저장 등이 용이하고, 특히 데이터베이스와 안전관리정보시스템의 연계로 안전 정보를 활용하는 구조체계가 간소화되어 기존의 문서화 작업에 소요되었던 인력 및 시간이 절약됨을 알 수 있었다.

  • PDF

벡터 유한 요소를 이용한 고주파 3차원 전자탐사 모델링 (Three-Dimensional High-Frequency Electromagnetic Modeling Using Vector Finite Elements)

  • 손정술;송윤호;정승환;서정희
    • 지구물리와물리탐사
    • /
    • 제5권4호
    • /
    • pp.280-290
    • /
    • 2002
  • 유한요소법을 이용한 전자기장의 3차원 모델링은 전자기장의 연속조건을 수치해가 만족하지 못함으로 인해서 발생하는 벡터 기생해(vector parasite)의 문제점을 가지고 있다. 이 연구에서는 벡터 기생해로 인한 오차를 줄이기 위해, 기저함수가 크기와 방향을 가지는 벡터요소를 도입하였다. 유한요소 행렬식은 complex BCG법을 적용하여 계산시간과 기억용량을 줄이고자 하였으며, 반복적인 해의 수렴속도 향상을 위해서 Point Jacobi법을 적용하였다. 개발된 알고리듬을 수직 전기 쌍극자 송신원을 이용한 층서구조 모형에 적용하여 이를 층서구조의 해와 비교함으로써 수치 모델링 알고리듬의 타당성을 검증하였으며, 이 과정에서 기존의 유한요소법에서 발생하는 벡터 기생해의 문제점이 벡터요소를 이용하는 경우에는 나타나지 않는 것을 확인하였다. 개발된 3차원 전자탐사 모델링 기법의 고주파수 영역으로의 적용성을 고찰하기 위하여, 100MHz의 수직 자기 쌍극자 송신원을 이용한 모델링을 유전율 이상층이 존재하는 층서구조 모형에 적용하여, 이를 층서구조 해와 비교하여 알고리듬의 타당성을 확인하였다. 검증된 3차원 전자탐사 모델링 기법을 유전율 이상체에 적용하여 이상체 주변에서의 전기장의 반응을 공간적으로 살펴보았다 이 연구에서 개발된 벡터요소를 사용한 3차원 고주파 전자탐사 모델링 기법은 기존의 전기전도도 이상체 뿐만 아니라 유전율 이상체에 대한 모델링을 가능하게 하여, 고주파 전자탐사법의 새로운 적용 및 해석의 기반을 제공할 수 있을 것으로 기대된다.

탄성파 탐사를 통해 본 울릉분지의 지각특성과 동해형성에 있어서의 의미 (Seismic study of the Ulleung Basin crust and its implications for the opening of the East Sea)

  • 김한준
    • 지구물리
    • /
    • 제2권1호
    • /
    • pp.9-26
    • /
    • 1999
  • 동해의 남서해역에 위치하는 울릉분지의 지각은 정상적인 해양지각보다 두꺼워서 과연 해양지각인지 아니면 얇아진 대륙지각인지가 불분명하다. 울릉분지의 지각구조와 그 특성을 정확히 모르는 가운데 분지의 진화에 관한 서로 다른 모델들이 제시되고 있음에 비추어 이 논문에서는 심부 탄성파 탐사자료를 이용하여 울릉분지의 지각구조와 특성을 밝히고 형성에 대한 단서를 제시하고자 한다. 울릉분지 지각의 두께는 10 km로서 정상적인 해양지각보다 두꺼우나 해저면 지진계 자료의 -p 분석과 2차원 파선추적을 기초로 하는 해석의 결과는 다음과 같이 해양지각의 특징을 가짐을 지시한다. (1) 울릉분지의 지각은 깊이에 따른 속도와 속도구배(velocity gradient)의 분포에서 상부층과 하부층으로 구성되는데 이들은 각각 전형적인 해양지각을 이루는 층단위 2 (layer 2)와 층단위 3 (layer 3)과 일치한다. (2) 상부층과 하부층 사이에는 약 1 km 구간에 걸쳐 5.7-6.3 km/s의 속도를 갖는 층을 관찰할 수 있는데, 이 것은 해양 층단위 2와 3 사이의 전이층으로 알려진 층단위 2C를 나타낸다. 그러므로 전형적인 대륙지각의 특징을 보이는 남서 일본열도가 늘어나면서 울릉분지가 형성되었다고는 볼 수 없다. 대신, 지각의 속도와 두께는 맨틀플룸의 바로 위가 아니라 그 주위에서 형성되는 정상보다 뜨거운 맨틀대류권내에서 발생하는 해저면확장에 의해 울릉분지가 형성되었음을 지시한다. 울릉분지의 형성에 영향을 미친 맨틀플룸은 중국 북동부에 존재하였을 것으로 추정되는데 이러한 논리는 울릉분지내와 그 주변에 분포하는 화산암의 형성시 맨틀플룸의 영향을 받았다는 지화학적 추론과 일치한다. 따라서 이 논문에서는 동해 남서부의 열림이 일본열도의 늘어남에 의한 것이 아니라 해저면 확장과 맨틀플룸의 영향을 받은 것임을 제시한다.

  • PDF

Phenolic Glycosides Isolated from Safflower (Carthamus tinctorius L.) Seeds Increase the Alkaline Phosphatase (ALP) Activity of Human Osteoblast-like Cells

  • Kim, Dong-Hyun;Lee, Jin-Hee;Ahn, Eun-Mi;Lee, Youn-Hyung;Baek, Nam-In;Kim, In-Ho
    • Food Science and Biotechnology
    • /
    • 제15권5호
    • /
    • pp.781-785
    • /
    • 2006
  • The chemical compositions of the seeds of the safflower (Carthamus tinctorius L.) plant were evaluated to determine possible compound having proliferative effects on human osteoblast cells. Three-[4,5-dimethylthiazole-2-yl]-2,5-diphenyltetrazolium bromide (MTT) test and alkaline phosphatase (ALP) activity were used to assess the effects of the isolates on the human osteoblast-like line (Saos-2). Activity guided fractionation led to the isolation of ALP activating lignin and alkaloid glycosides through the extraction of the seeds, solvent partitioning and repeated silica gel and octadecyl silica (ODS) column chromatographic separations. The data from Nuclear Magnetic Resonance (NMR), Mass (MS), and Infrared (IR) analyses enabled the determination of the chemical structure and characterization of two compounds as a tracheloside and an N-(p-coumaroyl)-serotonin mono-${\beta}$-D-glucopyranoside. These two compounds showed respectively $149.2{\pm}4.2$ and $138.9{\pm}3.5%$ ALP activity compared to the control when evaluated at a concentration of $100\;{\mu}g/mL$.

INVESTIGATION OF BAIKDU-SAN VOLCANO WITH SPACE-BORNE SAR SYSTEM

  • Kim, Duk-Jin;Feng, Lanying;Moon, Wooil-M.
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.148-153
    • /
    • 1999
  • Baikdu-san was a very active volcano during the Cenozoic era and is believed to be formed in late Cenozoic era. Recently it was also reported that there was a major eruption in or around 1002 A.D. and there are evidences which indicate that it is still an active volcano and a potential volcanic hazard. Remote sensing techniques have been widely used to monitor various natural hazards, including volcanic hazards. However, during an active volcanic eruption, volcanic ash can basically cover the sky and often blocks the solar radiation preventing any use of optical sensors. Synthetic aperture radar(SAR) is an ideal tool to monitor the volcanic activities and lava flows, because the wavelength of the microwave signal is considerably longer that the average volcanic ash particle size. In this study we have utilized several sets of SAR data to evaluate the utility of the space-borne SAR system. The data sets include JERS-1(L-band) SAR, and RADARSAT(C-band) data which included both standard mode and the ScanSAR mode data sets. We also utilized several sets of auxiliary data such as local geological maps and JERS-1 OPS data. The routine preprocessing and image processing steps were applied to these data sets before any attempts of classifying and mapping surface geological features. Although we computed sigma nought ($\sigma$$^{0}$) values far the standard mode RADARSAT data, the utility of sigma nought image was minimal in this study. Application of various types of classification algorithms to identify and map several stages of volcanic flows was not very successful. Although this research is still in progress, the following preliminary conclusions could be made: (1) sigma nought (RADARSAT standard mode data) and DN (JERS-1 SAR and RADARSAT ScanSAR data) have limited usefulness for distinguishing early basalt lava flows from late trachyte flows or later trachyte flows from the old basement granitic rocks around Baikdu-san volcano, (2) surface geological structure features such as several faults and volcanic lava flow channels can easily be identified and mapped, and (3) routine application of unsupervised classification methods cannot be used for mapping any types of surface lava flow patterns.

  • PDF

전주 완산칠봉 이팝나무 자생지의 생육환경으로 본 자연유산 가치 분석 (Analysis on the Growth Environment of Chionanthus retusus Community at the Wansanchielbong in Jeonju)

  • 김연
    • 한국전통조경학회지
    • /
    • 제28권4호
    • /
    • pp.85-97
    • /
    • 2010
  • 본 연구는 전주시 완산칠봉 이팝나무 자생 군락지의 토양환경 및 식물상 그리고 식생구조에 대하여 파악해 보고, 이를 토대로 현재 시보호수로 지정되어 있는 현재의 자연유산적 가치를 제고하고자 시도되었다. 전주 완산칠봉 이팝나무 자생지의 토양산도는 pH 5.69였으며, 유기물함량은 평균 4.98%로 비교적 양호한 것으로 나타났다. 한편, 식생과 식물상을 볼 때 비록 단위 규격은 월등한 규모는 아니지만 수고 2m 이상의 이팝나무 개체수는 107그루에 이르고 있을 뿐만 아니라 수고 2m 이하의 관목과 치수는 63그루가 확인되는 등 순수 단일 군락으로서의 종조성을 보이고 있는 점도 매우 주목할 만하다. 뿐만 아니라 어린 치수에서부터 거의 노거수로 분류되는 개체까지 다양한 영급의 수목이 함께 자생하는 것으로 보아 지속가능성 또한 매우 높은 실정이다. 그리고 이팝나무가 자생하는 완산칠봉은 역사적 순교지이기도 하며 전주십경 중 하나인 곤지망월(坤止望月)의 주대상으로 서의 역사성도 함께 간직하고 있다. 이와 같이 도심지내 자생 희귀 수종인 이팝나무가 안정된 군락을 이루고 있음은 국내에서 그 예를 찾아보기 어렵다. 그러나 도심내 한복판에 존재하기 때문에 교란과 훼손의 위협은 물론 토지이용의 요구 또한 지속적으로 받고 있었기 때문에 현재 전주시 보호림의 지정 차원에 머물 것이 아니라 장차 최소한 시 도 기념물로 지정되어 적극적인 보호대책이 강구되어야 할 것이다. 더불어 본 조사 자료가 완산칠봉 이팝나무 자생지의 합리적인 보전 및 생태적 관리방안 전략 수립에 기초 자료로 활용되기를 기대한다.

제조업의 국제화가 국내고용에 미치는 영향에 관한 연구 : 일본제조업 사례를 중심으로 (Impact of Internationalization of Manufacturing Industries on the Domestic Labor Market: The Japanese Manufacturing Industry)

  • 요시모토 코지;배일현
    • 유통과학연구
    • /
    • 제13권4호
    • /
    • pp.35-43
    • /
    • 2015
  • Purpose - This study aims to seek various plans to maintain the advancement of the overseas and domestic employment scenario through a case analysis of the Japanese industry, which maintains domestic employment while promoting the overseas advancement of companies despite having a similar industrial structure as Korea. The study further intends to derive insightful implications for Japanese manufacturing companies and government policies. Research design, data, and methodology - We selected four companies from the Japanese manufacturing industry. Being companies that were successful in increasing the domestic employment scenario while advancing in overseas markets. We utilized several secondary data sources including Japanese newspapers and report literature. Results - Previous studies have shown a negative relationship between Foreign Direct Investment (FDI) or offshoring and domestic employment. However, our results showed this relationship with respect to the Japanese manufacturing industry as follows: 1. FDI for developing overseas markets does not decrease domestic production. If Japanese companies change their strategy from exports to overseas production, there will be a consequent decrease in domestic employment of Multinational Enterprises (MNEs). However, the local production that plans the sales expansion of a foreign market does not substitute domestic production. 2. Several case studies illustrate that, as the production of final goods is expanded in foreign countries, there is a corresponding increase in the export of intermediary goods from Japan. In this case, if the production process of Japanese companies is promoted in foreign markets, the amount of exported material and parts from Japan will consequently increase. 3. It is difficult to consider that the establishment of subsidiary companies in foreign countries by manufacturing companies for wholesale, retail, and services decreases domestic employment. This is because the international development of these industries needs expatriates, expatriate training organizations, and research and development (R&D) activities. 4. When there is overseas demand, the growth of local management activities is expected to increase the work of the overseas business department in the head office in Japan, if competitiveness can be secured for better localization and management speed. 5. The conversion of the domestic manufacturing industry into high value-added production is necessary. The relocation of domestic production to foreign markets decreases domestic employment. To prevent this, the upgradation of domestic production bases, including high value-added production, and R&D capability need to be strengthened. Technology-based companies must develop new technology, patents, processes, and so forth, which require extensive human resources for R&D. Conclusions - Domestic medium-sized companies that are capable of consistently supplying high value-added products should be actively encouraged to deploy into and develop overseas markets. Further, this paper considers the necessity of a guidance policy that provides suggestions for overseas deployment, by the initiation of the government, to companies that cannot do so due to the lack of foreign experience or decisions by the CEO, despite having the relevant capability and technologies to supply high value-added products.