• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.729-734
• /
• 2001

A 3-dimentional finite element model for vibration analysis of steam-turbine blade groups is presented, employing the 3-dimentional incompatible brick element with 8 nodes. The skew coordinate system is introduced in the model for considering multi-axis symmetry and specialty of displacement constrain condition of blade groups. Vibration characteristics of blade groups are analyzed, and compared with experimental results.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.6
• /
• pp.39-44
• /
• 2010

In case of the design method, which is used in the inside and outside of the country, on corrugated multi plate structures, section modulus would be determined by assuming 2-dementioanl equivalent section of those structures. However, it is impossible to consider 3-dimentional effects when 2-dimentional design method is applied since structures are reinforced with a pattern of the 1200, 1600 mm reinforcements except the 800 mm reinforcement. Thus, in this study, technical specification standard is analyzed for the existing corrugated multi plate design methods, and section strengths, moments, and so on of equivalent and practical sections are compared and estimated using 3-dimentional FEM (finite element method) for semicircles and architectural features widely used. Based on the results of that analysis, analytical basis for 3-dimentional design of the CBS-RIB is suggested.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.1
• /
• pp.1-9
• /
• 1989

Up to date, the ditermination of three dimentional position is performed sperately by horizontal and vertical adjustment. The purpose of this study is to determine simultaneously three dimentional coordinates of one unknown point by measuring only three slope distances from one unknown point to three fixed points. In this study, the adjustment problem for measurement values inclading redundancy is solved by observation equation and condition equation, and also the characteristic of these two analysis methods is studied and investigated.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2002.06b
• /
• pp.55-55
• /
• 2002

An alternative sigma factor as encoded by the $\sigma$$\^$B/ gene in Streptomyces coelicolor A3(2) was known to be involved in the differentiation and osmotic stress response. Protein expression profiles of wild-type and a $\sigma$$\^$B/ mutant strain of S coelicolor A3(2), which is impaired in defense against osmotic stress, were compared in the absence and presence of osmotic stress, using 2-dimentional gel electrophoresis.(omitted)

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.11
• /
• pp.22-30
• /
• 1992

Using Multi-Dimentional Scaling(MDS) method, this paper analyzes the differences of acoustic properties of Korean phonemes projected as distances on a plan space. The phonemes were extracted from mono-syllables frequently occurring in daily conversation. From the distances between vowels we found that the distances between vowels /∂/ and /w/, /o/ and /u/, and vowels /$\varepsilon$/ and /e/ were relatively too short separate automatically. From the analysis of consonants. we found short distances between 1) phonemes in each phoneme group, 2) nasals and liquid /r/ of work initial, 3) nasal /n,m/ and liquid /l/ of word finals. But nasals, liquids and plosives of word initials had enough distances to be separated from those of word finals in automatic recogniation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.111-118
• /
• 1995

The three-dimentional effects on the breakdown voltage of non-reachthrough planar junctions which have the finite lateral radius of window curvature are analytically investigated. The critical electric fields at breakdown and the breakdown voltages are expressed successfully in a form which is normalized to the parallel plane case. The analytical results are in excellent agreement with the published results of experiment and the quasi-three-dimensional device simulation by MEDICI for non-reachthrough plane junctions having different background doping and junction depth. The results may be applicable to the estimations of breakdown voltages in many practical power devices.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.179-191
• /
• 1998

On this thesis, the focus is that studying costumes which have been affected by deconstructionism that is based on chaos and fractal the-ory. Chaos and fractal theory is accepted as a new paradigm for open world which is changing very vast and fast. And this theory is needed for artists and designers who should have spacetime conciousness and open mind and attitude towark open world. In the results, various costume typess of deconstructionism have been shown by fashion designers and artists' works. Thoes are as follows; 1. normal relationship of costume changes to abnormal relationship 2. three-dimentional structure of costume changes to two-dimentional structure. 3. open to materials and techniques. 4. separated costume parts reconstruct as ambiguous whole on function. 5. body absence and accessorizing.

• Selected Papers of The Society of Naval Architects of Korea
• /
• v.1 no.1
• /
• pp.26-36
• /
• 1993

In this paper, a thoery for the static analysis of large plastic deformations of 3-dimentional frames, aiming at application to the collapse analysis of ship structures, is presented. In the frame analysis formulation, effects of shear deformations are included. A plastic hinge is inserted into the field of a beam and post-failure deformation of the plastic hinge is characterized by finite rotations and extensions. In order to model deep web frames of ship's structures into a framed structures, collapse of thin-walled plate girders is investigated. The proposed analysis method is applied to several ship structural models in the references.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.632-649
• /
• 1996

The purpose of this study was to examine, by the method of 3-dimentional finite element analysis. how infraocclusion affected the stress distribution in surrounding bone and osseointegrated prosthesis. The 3-dimentional finite element mandibular models were made, in which the first and second molars were removed and the two osseointegrated implants were placed in the first and second molar sites and implant supported fixed prostheses were constructed. Analysis of equivalent stress and displacement induced by strong occlusion or infraocclusion was performed under vertical or inclined distributed loads. The results were as follows; 1. Under vertical load of 50N or 500N, the model in which infraocclusion had not been allowed showed greater stress on implants and the supporting bone than on natural teeth. 2. In the model in which infraocclusion of $30{\mu}m$ had been allowed, implant-prosthesis on the molars had no contact with opposing teeth under vertical load of 50N, However with the same allowed infraocclusion and the model under vertical load of 500N, implant prosthesis on the second molar had contact with opposing teeth, and stress distribution occured properly on natural teeth and implants. 3. Under $45^{\circ}$ inclined load, the model in which infraocclusion had not been allowed showed greater stress on implants and the supporting bone than on natural teeth. There was greater stress in the case of $45^{\circ}$ inclined load than in the case of vertical load. 4. Under $45^{\circ}$ inclined load of 50N or 500N, the model in which infraocclusion of $30{\mu}m$, had been allowed showed no occlusal contact on the implants and occlusal contact on the natural teeth. 5. In partially edentulous cases with implant supported prosthesis, we can prevent excessive load on implants by allowing infraocclusion.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.32-35
• /
• 1996

This paper analyzes characteristics of PMLSM using 3 dimensional equivalent magnetic circuit network method (3-D EMC). PMLSM of which the effective electric-airgap is not only very large, but also the width is finite width lateral edges has much leakage flux. Therefore, 2-D analysis method cannot consider it so carefully that 3-D analysis method must required. 3-D EMC which will be used for analysis of PMLSM performs modeling of it including solt and teeth structure, uses the magnetic motive force of stator winding and permanent magnet as source. and calculates magnetic flux density and force considering nonlinear characteristics of materials. we verified analysis validity by comparing simulation results with expermental results.