• 제목/요약/키워드: 3-dimensional modeling

검색결과 1,353건 처리시간 0.028초

헬리컬 기어의 최적 설계 프로그램 개발 및 3차원 모델링 (Development of the Optimal Design Program and the 3-D Modeling for the Helical Gear)

  • 곽재섭;정성원
    • 한국산업융합학회 논문집
    • /
    • 제3권2호
    • /
    • pp.107-114
    • /
    • 2000
  • Recently the studies on the vibration and the noise of a helical gear transmission have been focused on the many researchers. The manufacturing error and the deformation of the tooth profile, which generates the vibration and the noise of the gear transmission, are main factors. The major purpose of this study is to develop an optimal design program for reducing the vibration and the noise of the helical gear. To obtain the these results, we restrain the helical gear from the deformation of the tooth profile and increase the contact ratio within the optimal design program. Furthermore we made the three-dimensional solid modeling of the helical gear from the AutoCAD and the Pro/Engineer. This model will be available to generate the finite element model and the NC code.

  • PDF

트랙터 변속장치 기어의 3차원 파라매트릭 설계 및 분석 (Development of the 3D parametric modeling system for transmission gears of tractor)

  • 유우식;김성균
    • 산업경영시스템학회지
    • /
    • 제23권57호
    • /
    • pp.87-92
    • /
    • 2000
  • This paper describes a three dimensional parametric modeling system for transmission gears of tractor. In conventional design and manufacturing, information about three dimensional shapes has been described in engineering drawings. However drawing based design presents several problems; 1) communication errors between the designer and the modeller or manufacturer. 2) time taken and costs incurred in the design process. To solve these problems the system of parametric design based modeling has been proposed. Developed system in this paper consists of four steps; 1) parametric design of transmission gears with a solid modeler. 2) evaluation of gear geometry and strength. 3) dynamic simulation for gear interference check. 4) gear stress analysis with a CAE software. The proposed system has been tested in the fields and found to be a useful system.

  • PDF

BIM기반의 공동주택 주동 유형별 건물에너지 시뮬레이션 비교에 관한 연구 (A Comparative Study of Building Energy Simulations for Building Types in Multiple Stock Housing based on BIM(Building Information Modeling))

  • 이병호;이건원;여영호
    • KIEAE Journal
    • /
    • 제10권4호
    • /
    • pp.87-100
    • /
    • 2010
  • The energy efficient design of the multiple stock housing is very important not only to save energy but also to increase sustainability in a whole city because the multiple stock housing type is dominated in the major residential supply markets in Korea. During the early design phase of the multiple stock housing type, the architect need convenient and accurate tools for evaluating energy consumptions based on building types rapidly. Building Information Modeling(BIM) is introduced as useful tool systems providing interoperability between 3rd dimensional modeling tools and environmental engineering analysis tools, and could reduce time and cost for unnecessary modeling works in the analysis. However, it is still hard to apply to building design practice and integrated energy simulation techniques because interoperability using industrial standard file formats such as IFC and bXML is still underdeveloped. Therefore, the purpose of this study is to perform the building energy simulations, to compare the results on typical building types in multiple stock housing based on BIM, and to clear the problems using industrial standard file formats between 3rd dimensional modeling and building energy simulation software. In addition, through comparisons with simulation results according to the typical building types such as building forms, orientations, and building stories, the interrelation ship and characteristics of BIM based building energy simulation software are analysed and evaluated.

3 차원 회로 장치 제작을 위한 FDM 기반의 통합 시스템 개발 (Development of Hybrid Fused Deposition Modeling System for Three-Dimensional Circuit Device Fabrication)

  • 오성택;이인환;김호찬;조해용
    • 대한기계학회논문집A
    • /
    • 제38권8호
    • /
    • pp.869-874
    • /
    • 2014
  • 임의형상 제작기술을 이용하면 원하는 형상을 빠르게 제작할 수 있다. 하지만 임의형상 제작기술을 직접 제품을 생산하기 위한 제조기술에 적용하기 위해서는 문제점들이 있다. 이에, 하나의 대안으로써 다중재료 임의형상 제작기술이 주목 받고 있다. 특히 다중재료 임의형상 제작기술을 이용하면 기존의 2 차원 PCB 와는 다른, 회로 소자의 배열 및 외부 형상의 제약이 적은 3 차원 회로 장치를 제작 할 수 있다. 본 연구에서는 3 차원 회로 장치 제작을 위하여 FDM 방식과 직접주사 방식을 통합한 장치를 설계하고, 이 장치를 이용하여 3 차원 회로장치를 제작하였다. 즉, LED와 조도센서를 이용한 3 차원 회로 장치를 제작하여 작동을 확인하였으며, 자동화된 3 차원 회로 장치의 제작을 위한 임의형상 제작 기술과 직접주사 기술이 통합된 시스템 개발에 대한 기초연구를 수행하였다.

The differences in the potential energy anomaly for analyzing mixing and stratification between 2D and 3D model

  • Minh, Nguyen Ngoc;Hwang, Jin Hwan
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2015년도 학술발표회
    • /
    • pp.240-240
    • /
    • 2015
  • As Simpson et al. (1990) emphasized the importance of the straining process in the stratification and mixing in the estuarine circulation process, various researches have investigated on the relative contribution of each process to the overall potential energy anomaly dynamics. However, many numerical works have done only for two dimensional modeling along channel or the short distance cross sectional three dimensional simulations as Burchard et al. (2008) and the estuarine channel was not simulated so far. But, in the study on the physics of shallow coastal seas, spatial dimension in the three dimensional way affects significantly on results of a particular numerical model. Therefore, the comparison of two and three dimensional models is important to understand the real physics of mixing and stratification in an estuary. Also, as Geyer and MacCready (2013) pointed out that the lateral process seems to be important in determining the periodic stratifications, to study such process the three dimensional modeling must be required. The present study uses a numerical model to show the signification roles of each term of the time-dependent dynamic equation for the potential energy anomaly (PEA) in controlling along and lateral channel flows and different stratification structures. Moreover, we present the relationships between the ${\Phi}$-advection, the depth mean straining, vertical mixing and vertical advection can explain well how water level, salinity distribution and across velocity 2D model are slightly different from 3D.

  • PDF

Modeling of pile end resistance considering the area of influence around the pile tip

  • Hyodo, Junichi;Shiozaki, Yoshio;Tamari, Yukio;Ozutsumi, Osamu;Ichii, Koji
    • Geomechanics and Engineering
    • /
    • 제17권3호
    • /
    • pp.287-294
    • /
    • 2019
  • The finite element method (FEM) is widely used to evaluate the seismic performance of pile-supported buildings. However, there are problems associated with modeling the pile end resistance using the FEM, such as the dependence on the mesh size. This paper proposes a new method of modeling around the pile tip to avoid the mesh size effect in two-dimensional (2D) analyses. Specifically, we consider the area of influence around the pile tip as an artificial constraint on the behavior of the soil. We explain the problems with existing methods of modeling the pile tip. We then conduct a three-dimensional (3D) analysis of a pile in various soil conditions to evaluate the area of influence of the soil around the pile tip. The analysis results show that the normalized area of influence extends approximately 2.5 times the diameter of the pile below the pile tip. Finally, we propose a new method for modeling pile foundations with artificial constraints on the nodal points within the area of influence. The proposed model is expected to be useful in the practical seismic design of pile-supported buildings via a 2D analysis.

지하비축기지 건설시 지질조건을 고려한 건설공정의 가시화와 최적화 사례 (Visualization and Optimization of Construction Schedule Considering the Geological Conditions in the Complicated Underground Cavern)

  • 최용근;박준영;이성암;김호영;이희석;이승철
    • 터널과지하공간
    • /
    • 제19권3호
    • /
    • pp.167-173
    • /
    • 2009
  • 지하비축기지는 터널의 규모와 건설공정의 복잡성, 지질 및 지반공학적인 문제들로 인해 가장 난해한 지하공간건설 프로젝트로 알려져 있다. 최근 복잡한 지하구조를 3차원으로 가시화하고, 건설 자원과 지반조건 그리고 공정계획을 고려한 4차원 시뮬레이션을 활용하여 건설공정을 최적화하는 기술이 지하비축기지 건설 프로젝트에 적용되었다. 이 사례연구는 지하구조의 3차원 모델링을 통해 작업자가 복잡한 지하 현황을 쉽게 이해하고, 정확한 3차원 공간상에서 지질자료를 분석하고 검토할 수 있도록 도와줄 수 있음을 보여주고 있다. 또한 건설공정과 실제 공기를 고려한 4차원 시뮬레이션을 활용하여 자재와 버력의 반출입에서 나타날 수 있는 bottle neck의 위치와 시점을 판단하거나 일일 공사비의 변동을 검토하고, 작업조와 투입장비의 수, 터널 시공방향 및 굴착 착수 시점, 버력 및 자재의 운반경로를 검토함으로써 공정의 최적화를 달성할 수 있었다.

Web GIS 도형 자료 구축을 위한 문화재 3차원 모델링 기법 (3D Modeling Method for Cultural Properties Web GIS Database Construction)

  • 정성혁;이재기
    • 대한공간정보학회지
    • /
    • 제12권2호
    • /
    • pp.37-42
    • /
    • 2004
  • 반만년 숭고한 문화유산을 지니고 있는 민족으로서 우수한 문화유산을 영구 보존하고 후손에 잘 전승하여야 하며, 세계에 널리 알려야 할 필요가 있다. 이러한 필요성을 인식하고 컴퓨터 기술의 발단에 따라 최근 국내외에서 문화재 및 역사적 가치를 지닌 구조물에 대한 3차원 데이터베이스 구축, 문화재 복원 및 사이버 공간에서 전시 기술 등에 관한 연구가 활발히 이루어지고 있다. 따라서, 본 연구에서는 문화재의 3차원 도형자료를 3차원 좌표취득이 용이한 사진측량기법으로 취득하고, VRML을 이용하여 문화재의 다양한 색상이나 질감 등 정성적 특성을 표현할 수 있는 3차원 모델링 기법을 제시하고자 한다.

  • PDF

Creating a digitized database of maxillofacial prostheses (obturators): A pilot study

  • Elbashti, Mahmoud;Hattori, Mariko;Sumita, Yuka;Aswehlee, Amel;Yoshi, Shigen;Taniguchi, Hisashi
    • The Journal of Advanced Prosthodontics
    • /
    • 제8권3호
    • /
    • pp.219-223
    • /
    • 2016
  • PURPOSE. This study aimed to create a digitized database of fabricated obturators to be kept for patients' potential emergency needs. MATERIALS AND METHODS. A chairside intraoral scanner was used to scan the surfaces of an acrylic resin obturator. The scanned data was recorded and saved as a single standard tessellation language file using a three-dimensional modeling software. A simulated obturator model was manufactured using fused deposition modeling technique in a three-dimensional printer. RESULTS. The entire obturator was successfully scanned regardless of its structural complexity, modeled as three-dimensional data, and stored in the digital system of our clinic at a relatively small size (19.6 MB). A simulated obturator model was then accurately manufactured from these data. CONCLUSION. This study provides a proof-of-concept for the use of digital technology to create a digitized database of obturators for edentulous maxillectomy patients.

Three-dimensionally Simulated Monofilament Fabrics with Changes in Warp/Filling Yarn Diameter

  • Kim, Jong-Jun
    • 패션비즈니스
    • /
    • 제10권6호
    • /
    • pp.28-37
    • /
    • 2006
  • The purpose of this work is to present three-dimensional models of plain fabrics having various warp and filling yarn diameters. In order to simulate a woven fabric, a 3-dimensional CAD software with NURBS modeling capability was used. Final rendering was performed on the fabric model. It was demonstrated that the changes in yarn diameter could be three-dimensionally modeled through the use of fabric geometry and the 3D CAD. A short RhinoScript program was composed to implement the data importing and model building on the 3D CAD.