• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.216-222
• /
• 1996

Since many typical 2.5 Gbps optical transmitter modules use a 50$\Omega$ characteristic impedance, they require relatively high voltage and high power sources compared to the 25$\Omega$ module. However, simple replacement of the 50$\Omega$ internal matching impedance with 25$\Omega$ results in bandwidth reduction and consequent problem of data transmitter module is proposed in order to expand the modulator bandwidth. From the calculated resutls based on accurate 3-dimensional inductance analysis, we have found that the series parasitic inductance is a dominant element limiting the bandwidth and the insertion of a 2.5pF capacitor in parallel to the 20$\Omega$ matching resiter can increase the 3 dB bandwidth about 1.4GHz wider. The time-domain results show the rise time (140 psec) without the compensation is greatly improved to 63 psec with the compensation. This capacitive ocmpensation can be implemented easily and be compatible with common manufacturing process of the optical transmitter module.

• 한국의류산업학회지
• /
• 제24권6호
• /
• pp.694-706
• /
• 2022

This study focusses on the development of a motion-sensing smart leggings prototype with the help of a module that monitors motion using a fiber-type stretch sensor. Additionally, it acquires data on Electrocardiogram (ECG), respiration, and body temperature signals, for the development of smart clothing used in online exercise coaching and customized healthcare systems. The research process was conducted in the following order: 1) Fabrication of a fiber-type elastic strain sensor for motion monitoring, 2) Positioning and attaching the sensor, 3) Pattern development and three-dimensional (3D) design, 4) Prototyping 5) Wearability test, and 6) Expert evaluation. The 3D design method was used to develop an aesthetic design, and for sensing accurate signal acquisition functions, wearability tests, and expert evaluation. As a result, first, the selection or manufacturing of an appropriate sensor for the function is of utmost importance. Second, the selection and attachment method of a location that can maximize the function of the sensor without interfering with any activity should be studied. Third, the signal line selection and connection method should be considered, and fourth, the aesthetic design should be reflected along with functional verification. In addition, the selection of an appropriate material is important, and tests for washability and durability must be made. This study presented a manufacturing method to improve the functionality and design of smart clothing, through the process of developing a prototype of motion-sensing smart leggings.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.71-78
• /
• 2007

There have been continuous efforts to automate welding processes. This automation process could be said to fall into two categories, weld seam tracking and weld quality evaluation. Recently, the attempts to achieve these two functions simultaneously are on the increase. For the study presented in this paper, a vision sensor is made, and using this, the 3 dimensional geometry of the bead is measured in real time. For the application in welding, which is the characteristic of nonlinear process, a fuzzy controller is designed. And with this, an adaptive control system is proposed which acquires the bead height and the coordinates of the point on the bead along the horizontal fillet joint, performs seam tracking with those data, and also at the same time, controls the bead geometry to a uniform shape. A communication system, which enables the communication with the industrial robot, is designed to control the bead geometry and to track the weld seam. Experiments are made with varied offset angles from the pre-taught weld path, and they showed the adaptive system works favorable results.

• 감성과학
• /
• 제20권1호
• /
• pp.3-16
• /
• 2017

삼차원(3D) 프린터의 개발과 보급에 따라 현대의 소비자들은 자신이 원하는 제품을 집에서 3D프린팅 할 수 있는 시대에 살고 있다. 3D프린팅을 통해 소비자 맞춤형 제작이 활성화되기 위해서는 3D프린터와 호환되는 디지털 설계도를 소비자 스스로 제작할 수 있어야 한다. 또한 최적의 프린팅 재질과 온도를 설정할 수 있어야 하고 3D프린터의 유지보수에 비용을 감당해야 한다. 더하여 혹시 있을지 모르는 디자인에 대한 지식재산권 문제에 대응할 수 있어야 한다. 그러나 실상 소비자가 이러한 문제들에 대응하기는 어렵기 때문에 소비자가 원하는 방향으로 3D프린팅을 대행해 줄 수 있는 서비스가 개발될 필요가 있다. 이런 동기에서 출발한 본 연구는 소비자가 원하는 3D프린팅 서비스 방식이 무엇인지에 통찰을 얻기 위해 세계적인 온라인 3D프린팅 제품판매 업체인 Shapeways (www.shapeways.com)에 대한 사용자 경험을 다양한 측면에서 탐색하였다. 그 결과 Shapeways의 사용성, 검색과정, 가격 적절성, 재방문의도, 디자인의 다양성, 디자인 만족도에 대한 양적 평가에서 전반적으로 낮은 평가를 받았다. 또한 다양한 언어지원, 제품 제작과정 공개 및 온-오프라인 사이트 동시운영, 디자이너 중심의 소비자 맞춤형 제작 서비스, 배송 안전성과 제품 내구성에 대한 확신을 줄 수 있는 서비스, 표면의 마감처리 서비스가 필요하다는 건설적인 의견을 통해 소비자 맞춤형 3D프린팅 서비스에 대한 통찰을 획득하였다. 본 연구가 3D프린팅 서비스 플랫폼 개발뿐 아니라, 관련된 산업 및 연구에도 폭넓은 시사점을 줄 것으로 기대한다.

• 항공우주시스템공학회지
• /
• 제15권1호
• /
• pp.102-110
• /
• 2021

최근 멀티콥터는 비행 안정성 향상을 위해 다양한 충돌회피 센서를 탑재하고 있다. LiDAR를 이용해 3차원 위치를 인식하거나 다수 카메라와 실시간 SLAM 기술을 이용해 장애물과의 상대 위치를 계산하기도 한다. 또한 소형 프로세스와 카메라로 구성된 3D 깊이 센서를 사용하기도 한다. 본 연구에서는 충돌회피 소프트웨어 기술 개발을 위한 플랫폼으로써 상용 부품을 활용해 실내 비행이 가능한 소형 충돌회피 멀티콥터 시스템을 개발하였다. 멀티콥터 시스템은 LiDAR, RealSense, GPU 보드를 탑재하였고, 비행시험을 통해 YOLO 알고리즘 기반의 사물 인식 및 충돌회피 기능을 검증하였다. 이 논문에서는 시스템 설계/제작 및 탑재 장비 선정과정, 비행시험 결과에 관해 기술하였다.

• 한국분말재료학회지
• /
• 제3권4호
• /
• pp.227-232
• /
• 1996

(i) The development of a metallurgical bond during the spray forming of clad products has offered the possibility of manufacturing large rolls, including those used in hot and cold strip mills. Small rolls are already being produced in Japan. (ii) Technical developments, including the use-of-multi-atomizers have resulted in the elimination of porosity from the internal bore of a sprayed tube. Bimetallic tubing can also be manufactured and the installation of a 4.5 ton tube plant in the USA should provide low operation costs. (iii) Spray forming offers a potentially low cost manufacturing route for superalloy ring/casing components in high strength superalloys. (iv) A large pilot plant has been built for the spray forming of ultra-clean superalloys for turbine disc applications. (v) Using twin-atomizing technology, special steel billets have been spray formed up to 400mm diameter with deposition yields in excess of 90%. (vi) Al/Si alloy extrusion billets with excellent dimensional tolerances are being manufactured for large scale automotive applications. Several new aluminum alloys have also been developed, including high strength, low density and low cocfficient of expansion materials. (vii) New copper alloys have been developed and pilot plants are in operation to produce these alloys once markets have become established.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.636-641
• /
• 2014

This paper discusses the fabrication process for a Nipkow disk using micro-lens and pinhole disks. The confocal measuring system that uses the Nipkow disk has the advantage in measuring speed, because the Nipkow disk can simultaneously provide confocal images of all pixels in a CCD camera without requiring a lateral scanning unit. A micro-lens configuration, which focuses illumination on a pinhole, overcomes the low optical efficiency of the Nipkow disk system and allows its use in practical applications. This paper describes how to design the Nipkow disk in terms of numerical aperture, particularly for measuring the height of solder bumps in packaging application and for hybrid processes combining mechanical and semiconductor processes.

• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.101-107
• /
• 2006

Cold gas dynamic spray or cold spray is a novel manufacturing method for coatings. Cold spray is a high rate and direct material deposition process that utilizes the kinetic energy of particles sprayed at high velocity (300-1,200m/s). In this research, a technique to repair the damaged mold by cold spray deposition and mechanical machining was proposed. An aluminum 6061 mold with three-dimensional surface was fabricated, intentionally damaged and material-added by cold spray, and its original geometry was re-obtained successfully by Computer Numerical Control (CNC) machining. To investigate deformation of material caused by cold spray, deposition was conducted on thin aluminum plates ($100mm{\times}100mm{\times}3mm$). The average deformation of the plates was $205{\sim}290{\mu}m$ by Coordinate Measurement Machine (CMM). In addition, the cross section of deposited layer was analyzed by scanning electron microscopy (SEM). To compare variation of hardness, Vickers hardness was measured by micro-hardness tester.

• 전기전자학회논문지
• /
• 제27권1호
• /
• pp.65-70
• /
• 2023

높은 캐리어 이동도, 큰 포화 속도, 낮은 고유 정전 용량, 유연성, 그리고 투명성을 장점으로 가진 CNTFET(Carbon NanoTube Field Effect Transistor) 10,000개 이상을 현존하는 반도체 디자인 절차와 공정 프로세서를 활용하여 하나의 반도체 칩에 집적하는데 성공하였다. 제작된 반도체 칩의 3차원 다층 구조와 다양한 CNTFET 생산 공정 연구는 기존 MOSFET과 CNTFET를 하나의 반도체 칩에 함께 사용하는 hybrid MOSFET-CNTFET 반도체 칩 제작에 대한 가능성을 보여주고 있다. 본 논문에서는 hybrid MOSFET-CNTFET을 활용한 6T binary SRAM을 디자인하는 방법에 대해 논하고자 한다. 기존 MOSFET SRAM 또는 CNTFET SRAM 디자인 방법을 활용하여 hybrid MOSFET-CNTFET SRAM을 디자인 하는 방법을 소개하고 그 성능을 기존 MOSFET SRAM 그리고 CNTFET SRAM과 비교하고자 한다.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.138-145
• /
• 2012

The material used in this study is dielectric and ferrite. Because of the unique characteristics of the material, it is easily exposed to external shocks and pressure, which cause damage to the product. However, after being processed under high-temperature environment repeatedly, the mechanical strength of the product is greatly increased due to the change of the electrical properties. In this paper, dielectric and bonded ferrite material was tested for the material properties. The equipment for this experiment was produced and tested to allow Cylindrical and Three-dimensional geometry of the product for the vacuum deposition. For Cylindrical shape of the product, in order to obtain the equivalent film thickness, the device is constructed in a vacuum chamber which gives arbitrary revolving and rotating capability. The electrical performance of the product is obtained through this process as well. However, as mentioned above, with repeating processes under high temperature and exposure to external environment, the product is easy to be broken. This experiment has enabled us to find out a stable condition to apply the communication of the RF high frequency to each of the core elements, such as Ferrite and Dielectric which is then used for the mechanical strength of the Raw material, hetero-junction material, Hetero-junction Ag Coating material and hetero-junction Ag Coating SiO2 Coating material respectively.