• The Korean Journal of Malacology
• /
• v.27 no.4
• /
• pp.307-315
• /
• 2011

Digestibility index of 12 phytoplankton species were invested during the larval development sizes. Ingestible size of phytoplankton varied depending on larval sizes: Isochrysis galbana, I. aff. galbana, Pavlova lutheri, Chlorella ellipsoidea, Nannochloris oculata was ingested 94.2-99.7% all larval sizes. Cheatoceros calcitrans, C. gracilis and C. simplex could ingest over 90.0% after umbo stage (mean shell length $189.3{\pm}13.8{\mu}m$). Phaeodactylum triconutum, Dunaliella tertiolecta and Tetraselmis tetrathele could not ingested D-shaped larvae (shell length $65.0-100.0{\mu}m$) but ingested 97.3-99.7%, 43.3-99.3%, 48.5-99.3% after then larval stages, respectively. But Thalassiosira weissflogii was ingested 1.0-1.7% only at full grown stage. Over 50.0% ingestion cell size was D-shape stage larvae with smaller than mean $102.3{\mu}m$ in shell length could ingest phytoplankton with $4.6{\mu}m$ in both major and minor axis and up to $9.3{\mu}m$ in minor axis basis for larger than mean $158.3{\mu}m$ in shell length, respectively. At all larval stages, phytoplankton with larger than $10.0{\mu}m$ in both major and minor axis could not be ingested.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.593-599
• /
• 2013

In this study, a test-bench for developing and verifying a 1- or 2-axis nanopositioner was manufactured. Using this test-bench, adesigned and manufactured flexure stage based on an analysis can configure nanopositioning systems. A breadboard and fixture were fabricated to be equipped with various types of mechanisms and sizes of stages. The test-bench has linear encoders for calibrating sensors and verifying the orthogonality and parasitic motion of 2-axis nested-type nanopositioners. The controller was developed using LabVIEW and a TI microcontroller. A case study that exemplified the test bench for developing a nanopositioner by senior undergraduate students is shown.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.3 no.1
• /
• pp.19-31
• /
• 1976

To study the eruption pattern of the mandibular first permanent molar, the author took 263 cases of Oblique Cephalogram from age 3 to 6 years old children and observed the vertical and mesiodistal directional change and tooth axis change. The following results were obtained.; 1. The eruption pattern of the mandibular first permanenl molar was changed at about 60~66 months or calcification stage IX. 2. At the early stage, the path of eruption of the mandibular first permanent molar directed upward and forward and after calcification stage IX it changed to the direction of upward. 3. The height of the alveolar bone of the upper part of the mandibular first permanent molar was almost equal to that of the interseptal bone of the first and second deciduous molar, but the height showed gradual descent afterwards. 4. At the early stage, the distance from the distal end of the mandibular second deciduous molar to the anterior portion of the ascending ramus was 1.2~1.4 times larger than the mesio-distal diameter of the mandibular first permanent molar, but at the later stage it was enlarged 1.7~1.9 times larger than the mesiodistal diameter of the mandibular first permanent molar.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.4
• /
• pp.355-360
• /
• 2010

In this study, a modeling process of a 3-axis planar alignment stage is suggested. Vibration tests using a laser vibro-meter is performed to find the modeling parameters of the stage. By analyzing the result of the test, the stiffness of prismatic joints and revolute joints, as well as the contact conditions of the thrust bearings, can be calculated. The modeling of the stage was validated by comparing six normal mode shapes, which are acquired from experiments and simulations.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.163-170
• /
• 2002

The quality of a precision product, in general, relies on the accuracy and precision of its manufacturing and inspection process. In many cases, the level of precision in the manufacturing and inspection system is also dependent on the positioning capability of tool with respect to the work piece in the process. Recently the positioning accuracy level has reached to the level of submicron and long range of motion is required. For example, for 1 GDARM lithography, 20nm accuracy and 300mm stroke needs. This paper refers to the lithography stage especially to fine stage. In this study, for long stroke and high accuracy, the dual servo system is proposed. For the coarse actuator, LDM (Linear DC Motor) is used and for fine one VCM is used. In this study, we propose the new structure of VCM for the fine actuator. It is 3 axis precision positioning stage for an aligner system. After we perform the optimal design of the stage to obtain the maximum force, which is related to the acceleration of the stage to accomplish throughput of product. And we controlled this fine stage with TDC. So we obtained 50nm resolution. So later more works will be done to obtain better accuracy.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1668-1676
• /
• 2010

The somatotropic axis plays a key role in proliferation and differentiation of avian organs during both pre- and posthatching periods. This review discusses the complexity of regulation of the endocrine system for chicken development and growth by growth hormone (GH), insulin-like growth factor (IGF), and IGF binding protein (IGFBP). In addition, the thyrotropic axis, including thyrotropin-releasing hormone (TRH) and thyroid hormones ($T_4$ and $T_3$), is also involved in the GH-secreting pattern. In mammals, IGFI and -II are always sequestered in a 150 kDa non-covalent ternary complex. This complex consists of one molecule each of IGF-I or IGF-II, IGFBP-3 or IGFBP-5 and an acid labile subunit (ALS). Chick ALS is identified in different strains for the first time, and further investigation of the expression of ALS on developmental stage and ALS effect on IGF bioavailability may be addressed in the future.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.13 no.1
• /
• pp.1-5
• /
• 1977

A series of echo-sounding and current measurements as well as the drogue and the drift bottle experiments were carried out in Asan Bay since November 1974. Several sand bars or sand flats covered by silts were developed at ebb tide in the bay. Sand waves and sand ripples were seen on the surface of the sand bars, around which sea channels of 8~ 12 meters in depth are formed. The main stream axis of the flood current which is separated into east and west branch flows southward. A cyclonic and an anticyclonic eddy are developed at the early stage of flood tide. They are transformed into a clockwise eddy before the slack water. The maximum tidal current speed observed was 3.1 ~ 3.2 knots at the entrance of the bay, while it was 1.O ~ 2.8 knots in the bay. The location of the main stream axis of the tidal current coincides well with the sea channel. A salt wedge was observed at the estuary of the Sabgyo-cheon River.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.130-136
• /
• 2005

This paper presents an optimal design and the performance evaluation of two-axis nano positioning stage with round notched flexure hinges. A flexure hinge mechanism with round notched flexure hinges is to guide the linear motions of a moving plate in the nano positioning stage. A Min-Max algorithm is applied to the design of the flexure hinge mechanism for nano positioning stage. In the design process, the structure of the flexure hinge mechanism is fixed, then the radius of a round hole and the width of two round holes are chosen as design variables, and finally the do sign variables are calculated by the Min-Max algorithm. The machined flexure hinge mechanism, stack type PZTs for actuation and capacitance type displacement sensors for position measurement are assembled into the nano positioning stage. The experimental results of the manufactured nano positioning stage show the first modal resonance frequency of 197 Hz, the operating range of 40 um, and the resolution of 3 nm.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.4
• /
• pp.102-108
• /
• 2004

A layout of regenerative liquid rocket engine using turbo pump has been designed for development of high performance liquid rocket engine. each components of engine system was placed by considering assembly and characteristic. first stage engine system is controled by one plane of axis gimballing and composed of four engine assembly to cluster with launch vehicle. second stage engine system is controled by two plane of axis gimballing and composed of one engine assembly. assembly and disassembly Processes and required program have been developed. various shape of instruments were also developed for carrying out assembly and disassembly process efficiently.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.162-165
• /
• 2004

A layout of regenerative liquid rocket engine using turbo pump has been designed for development of high performance liquid rocket engine. each components of engine system was placed by considering assembly and characteristic. first stage engine system is controled by one plane of axis gimballing and composed of four engine assembly to cluster with launch vehicle. second stage engine system is controled by two plane of axis gimballing and composed of one engine assembly. assembly and disassembly processes and required program have been developed. various shape of instruments were also developed for carrying out assembly and disassembly process efficiently