• Journal of Veterinary Clinics
• /
• v.22 no.4
• /
• pp.336-341
• /
• 2005

Anabolic steroid compounds are widely used for the increase of muscle mass, density of bone and athletic ability. The present study conducted to evaluate the effects of nandrolone decanoate (ND), one of the anabolic steroid compounds, on disuse muscle atrophy and healing process of bone in dogs. Twenty physically healthy dogs of both sexes were used in this experiment and divided into three groups: group A (control), group B (low dose M-1.5 mg/kg) and group C (high dose ND-7.5 mg/kg). One-mm strip of full thickness bone was excised from the radius below the pronator teres muscle for the artificial fracture and then the fractured ends were fixed in apposition with bone plate leaving 1mm gap, and finally immobilized externally by Robert John's bandage for 4 weeks. ND was administered intramuscularly once a week far 8 weeks. Body weight, muscle mass change and fracture gap of the bone were evaluated immediately after surgery, and 2, 4, and 8 weeks after surgery. The rates of muscle mass change 8 weeks after surgery were $-2.75\pm0.16\%,\;1.68\pm0.11\%\;and\;1.74\pm0.48\%$ in groups A, B and C, respectively. The significant increase (p<0.05) of muscle mass increments were found in the treated groups. The fibrous connective tissue layer in the fracture gaps of the treated groups increased more than the control, especially in the group C at 4th week. More dense fibrous connective tissue were found in the treated groups at 8th week. Collectively, our results suggested that ND was an effective anabolic agent for the immobilized disuse muscle and bone healing.

• Journal of Chest Surgery
• /
• v.39 no.9 s.266
• /
• pp.659-667
• /
• 2006

Background: Experimental studies of vascular remodeling in the pulmonary arteries have been performed actively. These models required a persistent vascular insult for intimal injury induced by chronic hypoxia, monocrotaline intoxication or chronic air embolism and characterized medial hypertrophy and neointimal formation by active synthesis of the extracellular matrix protein. The purpose of this study was to determine the pattern of pulmonary vascular remodeling after obstruction of the pulmonary vein. Material and Method: Obstruction of the right pulmonary vein with a metal clip was performed in Sprague-Dawley rats $(352{\pm}18g,\;n=10)$ to cause pulmonary vascular disease. Fifteen days later, experimental studies were done and finally the both lungs and hearts were extirpated for experimental measurement. Pulmonary arterial pressure, weight ratio of right ventricle (RV) to left ventricle (LV) and ventricular septum (S) (RV/LV +S weight ratio), and pulmonary artery morphology (percent wall thickness, %WT) were evaluated and compared with normal control groups. Result: Pulmonary hypertension $(38{\pm}12mmHg\;vs\;13{\pm}4mmHg;\;p<0.05)$ and right ventricular hypertrophy (right ventricular/left ventricular and septal weight ratio, $0.52{\pm}0.07\;vs\;0.35{\pm}0.04;\;p<0.05$) with hypertrophy of the muscular layer of the pulmonary arterial wall (percent wall thickness, $22.4{\pm}6.7%\;vs\;6.7{\pm}3.4%;\;p<0.05$) were developed by 15 days after obstruction of the pulmonary vein. Conclusion: Obstruction of the pulmonary vein developed elevation of pulmonary blood pressure and medial hypertrophy of the pulmonary artery. These results are a part of the characteristic vascular remodeling. Theses results demonstrate that obstruction of the pulmonary vein can develope not only high pulmoanry blood flow of contralateral lung but also intima injury inducing vascular remodeling.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.500-510
• /
• 2008

Statement of problem: Recently researches about WC/C (Tungsten Carbide/Carbon) or TiN (Titanium Nitride) coating on abutment screws are going on. It decreases friction coefficient, resistance against corrosion and withdrawal of physical fragility when the coating is applied to the metal surfaces. It is reported that coated abutment screws improved abrasion, adaptability and detorque force. Purpose: This study is about the effects of coated abutment screws on loosening of screw and for the purpose of solving the loosening phenomenon of abutment screws which is clinical problem. Material and methods: Detorque force and surface changes are compared when 10 times of repeated closing and opening are applied to both uncoated titanium abutment screws (Group A) and coated abutment screws with WC/C (Group B) and TiN (Group C). Each group was made up of 10 abutment screws. Results: 1. Before repeated closing and opening, Somewhat rough surface with regular direction was observed in Group A. Coated granules were observed in group B and group C and overall coated layer appeared in regular and smooth form. 2. Before repeated closing and opening, The coated surface showed bigger and thicker size of coated granules in Group C than Group B. 3. After repeated closing and opening, abrasion and deformation of abutment screw surface was observed in Group A and Group B. Exfoliation phenomenon was observed in Group B. 4. Group A showed biggest range of decrease when the weight changes of abutment screws were measured before and after repeated closing and opening. Group C showed less weight changes than Group B but there was no statistical difference between two groups. 5. Group B and Group C showed higher average detorque force than Group A and there was statistical difference. 6. Group A showed more prominent decrease tendency of average detorque force than Group B and Group C. Conclusion: Coated abutment screws with WC/C or TiN did not show prominent surface changes than uncoated titanium abutment screws even though they were repeatedly used. And they showed excellent resistance against friction and high detorque force. Thus it is considered that adaptation of WC/C or TiN coating on abutment screws will improve the screw loosening problem.

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.501-508
• /
• 2012

This study was carried out to compare species diversity of soil bacteria from Baekdudaegan mountain forests (Bonghwa-gun, Mungyeong-si and Sangju-si) in Gyeongsangbuk-do and to analyze the effects of soil environments on diversity and population of soil bacteria. Soil bacteria were isolated from soil samples by streak plate method, and identified by DNA extaction and 16S rDNA sequence analyses. The population of soil bacteria from the soil samples of Bonghwa-gun was the highest with $5.1{\times}10^5cfu/g$, and followed by those from Mungyeong-si and Sangju-si with $1.9{\times}10^5cfu/g$ and $1.1{\times}10^5cfu/g$, respectively. The population of soil bacteria from surface layer soil was the highest, and then gradually decreased according to soil depth. The increase in population of soil bacteria from soil samples of different sites was correlated with the increase of the altitude of soil sampling site, depth of A horizon, liquid phase among three phases of soil, water content and bulk density of soil. Two hundreds and sixty eight bacterial colonies from Bonghwa-gun were classified into 10 species, 8 genera. One hundred and thirty four bacterial colonies from Mungyeong-si were classified into 15 species, 9 genera. Forty four bacterial colonies from Sangju-si were classified into 5 species, 2 genera. The dominant species (occupancy rate) from Bonghwa-gun and Mungyeong-si were Bacillus weihenstephanensis (36% and 40%, respectively), and Sangju-si was Bacillus cereus (39%). The relationships between soil environment and community structure of soil bacteria were analyzed statistically by using ecological indices. The diversity, evenness and dominance indices of soil bacteria were 6.30, 2.04 and 0.59 in Bonghwa-gun, 9.09, 2.94 and 0.51 in Mungyeong-si, and 4.55, 2.34 and 0.71 in Sangju-si, respectively. The diversity and evenness indices were increased by the increase of water content, drainage condition and gravel content of soil, while the dominance index was decreased.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.5
• /
• pp.403-409
• /
• 2000

Objectives: Due to the heterogeneous receptor distribution and changes of receptor status over time, the biochemical measurement of estrogen receptor status of biopsy specimens is not sufficient to diagnose breast cancer. As a result, I-123 labeled estradiols have been applied for the diagnosis. The purpose of this study was to develop a suitable radioligand for imaging estrogen receptor-positive human breast tumors. Methods: Among the various estradiol derivatives, $17{\alpha}-[^{123}I]$iodovinyl estradiol ($[^{123}I]$IVE) has been prepared from $17{\alpha}$-ethynyl estradiol. Labeling of $E-17{\alpha}-[^{123}I]$iodovinyl estradiol (E-$[^{123}I]$IVE) was carried out using peracetic acid with $[^{123}I]NaI\;and\;Z-[^{123}I]IVE$ labelling was archived using chloamine-T/HCl solution with $[^{123}I]$NaI. Labeling yield was determined by silica thin-layer chromatography (TLC) and radiochemical purity was measured by high performance liquid chromatography (HPLC). The biodistribution of E-$[^{123}I]$IVE was measured in immature female rats at 60 min, 120 min and 300 min after injection. Results: The labeling yield of two isomers was 92% and 94% ($E-[^{123}I]IVE\;and\;Z-[^{123}I]IVE$, respectively). The radiochemical purity was more than 98% after purification. The highest uptake was observed at 120 min in uterus (3.11% ID/g for E-$[^{123}I]$IVE). Conclusion: These results suggest the possibility of using E-$[^{123}I]$IVE as an imaging agent for the evaluation of the evaluation of the presence of estrogen receptor in patients with breast cancer.

• Journal of Bio-Environment Control
• /
• v.21 no.2
• /
• pp.102-107
• /
• 2012

This study was carried out to investigate the optimum soil environmental conditions of ten contents on production of high quality fruit in 'Hongro' apple. The soil and fruit characteristics were analyzed at total 60 orchards in major apple producing areas such as Chungju, Moonkyeung, Yeongju, Andong, Yeosan and Yeongcheon (10 orchards an area). The soil environmental factors affected fruit weight were the highest relative contribution in saturated hydraulic conductivity of 33.3%. The cation was 24.6%, the bulk density, soil texture and solid phase were also high as relative contribution. The fruit weight was influenced by soil physical properties more than soil chemical properties. The soil environmental factors affected sugar content were highest soil texture of 21.9%, and the CEC and bulk density were low as relative contribution. The fruit coloring was the highest relative contribution in phosphate of 55.9%. While saturated hydraulic conductivity and organic matter content were low. The coloring was influenced by soil chemical properties more than soil physical properties. Fruit coloring was high influenced over 70% by soil physical properties. Finally, relative contribution on fruit quality related with sugar content, fruit weight, and coloring were high influenced by cultivation layer depth of 25.8%, soil texture 22.2%, and soil pH of 21.0% but bulk density and solid phase were low relative contribution. The fruit growth and soil chemical properties in 'Hongro' apple were very closely related. Therefore, orchard soil management to produce high quality fruit was very importance drainage management and organic matter application. We concluded that scientific soil management is possible by quanlifiable of soil management factors.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.3
• /
• pp.366-372
• /
• 2006

This study is to investigate the physicochemical properties of differently pretreated chestnut starches during starch isolation and to examine their gelatinization properties by both heat and alkali treatments. One kind is starch A made by alkali method from peeled chestnut. The other is starch B made from chestnut with the outer layer. The results are as follows. Starch A has higher water binding capacity of 86.9% than starch B with 80.66%. Swelling powers of both starch A and B increased rapidly from $60^{\circ}C\;to\;80^{\circ}C$ in both, and since then it has changed a bit. Both began to show their solubility at $60^{\circ}C$ and increased continuously as the temperature went up. Starch A has higher swelling power and solubility than starch B. In iodine reaction, starch A has higher ${\lambda}max$ and absorbance at ${\lambda}max$ than starch B. X-ray diffraction patterns showed that starch A is type $C_b$ and that starch B is type B. Starch B has higher relative crystallinity of 37.0% than starch A with 36.2%. The results by differential scanning calorimetry revealed that starch A gelatinized from $66.95^{\circ}C$ to $77.5^{\circ}C$ and its enthalpy is 2.04 cal/g. And starch B gelatinized from $67.09^{\circ}C\;to\;77.5^{\circ}C$, and its enthalpy is 2.29 cal/g. Amylograms of chestnut starch at 6.5% concentration indicated that starch B needs higher onset temperature when beginning to gelatinize than starch A does. But starch A shows much higher peak viscosity, breakdown and setback than starch B does. Starch A shows higher viscosity, gel volume, and optical transmittance in gelatinization properties by alkali than starch B does.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.357-367
• /
• 2018

Recent earthquakes in Gyeongju and Pohang have raised interest in liquefaction in South Korea. Liquefaction, which is a phenomenon that excessive pore pressure is generated and the shear strength of soil is decreased by repeated loads such as earthquakes, causes severe problems such as ground subsidence and overturning of structures. Therefore, it is necessary to identify and prepare for the possibility of liquefaction in advance. In general, the possibility of liquefaction is quantitatively assessed using the Liquefaction Potential Index (LPI), but it takes a lot of time and effort for performing site response analysis which is essential for the liquefaction evaluation. In this study, a simple method to evaluate the liquefaction potential without executing the site response analysis in a downtown area with a lot of borehole data was proposed. In this simple method, the correlation between the average shear wave velocity of the target location ground and the LPI divided by thickness of liquefiable layer was established. And the applicable correlation equation for various rock outcrop accelerations were derived. Using the 104 boreholes information in Seoul, the correlation equation between LPI and the shear wave velocity (ground water level: 0m, 1m, 2m, 3m) is obtained and the possibility of liquefaction occurrence in Seoul and Gyeongju is evaluated. The applicability of the proposed simple method was verified by comparing the LPI values calculated from the correlation equation and the LPI values derived using the existing site response analysis. Finally, the distribution map of LPI calculated from the correlation was drawn using Kriging, a geostatistical technique.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.165-172
• /
• 1973

The sterile phenomenon is frequently found in the inter-species hybrids of ginseng as in other plants. It is known that among the hybrids between Panax Ginseng (PG) and Panax Quinquefolium (PQ), and between Panax Ginseng and Paxax Japonicus (PI), PG${\times}$PI is fertile only very rarely, while PG ${\times}$ PQ is always sterile. Therefore, in order to clarify the relationship between this sterility phenomenon and the metabolism of free amino acids, the changes of free amino acids through the formation of the flower organs and seeds of two hybrids, PG ${\times}$ PQ and PG ${\times}$ PI were investigated by thin layer chromatography. The results are summarized as follows: 1. Distinct differences in the quantity and number of free amino acids were recognized between PG ${\times}$ PQ, PG ${\times}$ PI and their parent plants. From the hybrid PG ${\times}$ PQ, 19 kinds of ninhyrin sensitive substances were detected in all. They were (1) 17 amino acids: alanine, valine, leucine, phenylalanine, proline, hydroxy-proline, serine, threonine, tyrosine, aspartic acid, glutamic acid, lysine, arginine, ${\gamma}$-amino butyric acid, ${\beta}$-alanine, cysteic acid and tryptophan, and (2) two amides: asparagine and glutamine. From the hybrid PG ${\times}$ PI, in addition to the above 19 substances, methionine and one unknown substance were detected. 2. Generally, alanine, as partie acid, glutamic acid, cysteic acid and asparagine were detected in large amounts in the two hybrids as in PG, PG and PJ but it was a noticeable fact concerning these two hybrids that the largest quantity of asparagine was found at microspore satge and pollen mature stage. 3. The decrease of cysteic acid in the two hybrids at the red ripened stage was the same as in PQ and PJ but opposite to the change in PG. The detection of methionine in PG ${\times}$ PJ was worthy of notice. 4. The change of proline was conspicuously different from that in their parent plants. It was detected as a trace of color at the micros pore stage while asparagine was detected in the greatest amount at that time. It is well known that the quantity of proline is closely related to the sterility of plant. This fact was also found true in the formation of ginseng seeds. It was reported as well that asparagine accumulated when proline decreased. 5. The deficiency of proline seemed to be closely related with the sterility of hybrids and with the degradation of pollen in anther. 6. The difference in the changes of free amino acids between the selfed lines of PG, PQ and PJ, and their hybrids seemed to be caused by the transformation of gene-action system by hybridization. On these phenomena along with proline metabolim and its physiological role in seed formation further studies are required.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.2 no.2
• /
• pp.105-133
• /
• 1969

The stability of three major pigments in lavers, namely chlorophylls, carotenoids, and phy-cobilins, during processing and storage was studied. The results of the pigment retention in fresh lavers during storage at low temperatures, of heat lability during heat treatment, and of the pigment loss during storage are summarized as follows: 1. The contents of chlorophyll a, xanthophyll (lutein+zeaxanthin), and carotene ($\alpha-+\beta-carotene$) averaged 1,525, 627, and $409{\mu}g/g$ of dry samples respectively The comparative composition of four carotenoids, lutein, $\beta-carotene$, zeaxanthin, and $\alpha-carotene$, was 35.9, 33.7, 12.2, and $5.8\%$ respectively. 2. In storage of fresh lavers at room ternperature ($20-25^{\circ}C$), 2 to $5^{\circ}C$, and $-15^{\circ}C$, the pigments generally were retained more at 2 to $5^{\circ}C$ than others while carotene only showed more retention at $-15^{\circ}C$ than at 2 to $5^{\circ}C$. Phycocyanin tended to decrease more rapidly than phyco-erythrin at low temperatures. 3. In regard to heat treatment of both dried and wet materials at 40, 60, 80, $100^{\circ}C$ respectively, the pigments were more stable at lower temperatures than at higher temperatures in both cases of materials. Carotenoids were retained more in wet materials than in the sun dried. Xanthophylls showed higher heat stability than carotenes. Phycoerythrin was considered more heat labile than phycocyanin, particularly at higher temperatures. 4. In storage of heat treated lavers for 50 days at room temperature, the retention of pigments appeared differently in accordance with the temperatures of treatment The materials treated at $60^{\circ}C$ showed better relention of pigments than those treated at the other temperatures. Degradation rate of xanthopllylls, carotenes, and phycobilins was decreased in the materials treated at higher temperatures, showing a tendency of great pigment retention even for a long period storage. Chlorophyll il was retained more in sun dried materials whereas xanthophyll and carotene were retained more in the wet. 5. In order to maintain a higher pigment stability during storage, the materials must be treated at $60^{\circ}C$ in a dryer with rapid ventilation until the moisture level reaches about $6.0\%$. In case of treatment at a higher temperature than $60^{\circ}C$, they must be treated for a short period of time to minimize pigment degradation by heat. 6. The lavers treated with the solutions of pH around 7.8 showed a higher retention of chlorophyll a. When treated with the solutions of algal extracts such as agar and alginic acid, uniform layer of laver sheets and better surface gloss of dried layers were obtained.