• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.139-141
• /
• 2015

Contact resistance of interface between the channel layers and various S/D electrodes was investigated by transmission line method. Different electrodes such as Ti/Au, a-IZO, and multilayer of a-IGZO/Ag/a-IGZO were compared in terms of contact resistance, using the transmission line model. The a-IGZO TFTs with a-IGZO/Ag/a-IGZO of S/D electrodes showed good performance and low contact resistance due to the homo-junction with channel layer.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.377-383
• /
• 2003

In this study, the methodology for determination of shoulder height in the internal shape design of ball bearing using 3D contact analysis is proposed. The quasi-static analysis of a ball bearing was performed to calculate the distribution of applied contact load and angles among the rolling elements. From each rolling element loads and the contact geometry between ball and inner/outer raceway, 3D contact analyses using influence function are conducted. These methodology is applied to HDD ball bearing. The critical axial load and the critical shoulder height which are not affected by edge in the present shoulder height is calculated. The proposed methodology may be applied to other rolling element bearing for the purpose of reducing the material cost and improving the efficiency of the bearing design process.

• Tribology and Lubricants
• /
• 제18권2호
• /
• pp.160-166
• /
• 2002

In case of rough contact fatigue, the accurate calculation of surface tractions is essential to the prediction of crack initiation life. Accurate Surface tractions influencing shear stress amplitude can be obtained by contact analysis based on the morphology of contact surfaces. In this study, to simulate rough contact under sliding condition, gaussian rough surface generated numerically in the previous study was used and to calculate clack initiation life in the substrate, dislocation pileup theory was used.

• 한국전산구조공학회논문집
• /
• 제20권4호
• /
• pp.469-476
• /
• 2007

많은 계산량이 요구되는 삼차원 접촉 문제의 효율적인 유한요소 해석을 위하여 영역/경계 분할 기법을 적용하였다. 접촉 경계면의 부등식 적합 조건과 부영역, 공유면, 접촉 공유면의 등식 적합 조건을 모두 벌칙 함수로 처리하였다. 이에 따라 모든 유효 강성 행렬이 양 정치화되므로, 역행렬과 같은 각종 행렬 연산이 매우 간편해진다. 또한 전체 영역의 형상이 복잡하더라도, 임의의 부영역, 공유면, 접촉 공유면 단위로 쉽게 유한요소 모델링할 수 있다. 즉, 관련 지배 방정식은 물론 경계 조건도 독립적으로 이산화할 수 있으므로, 국부적인 비선형 접촉 조건에 대한 효율적인 해석이 가능하다. 간단한 수치 예제를 통하여 삼차원 접촉 해석의 효율성에 관한 기본적인 경향을 검토하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.632-635
• /
• 2004

The purpose of this paper is to investigate the effect of arc current and contact velocity on the erosion of silver-based contact materials to be used in low voltage circuit breakers. The opening velocity during breaking, which is constant, ranges between 2m/s to 6m/s in the 415V $25kA_{rms}$. Contact erosion is evaluated by measuring the mass change of the cathode and anode. The results show that the increase in opening velocity from 2m/s to 6m/s leads to a decrease in the contact erosion. It is shown that the material transfer from one electrode to another depends on the transfer charge and the opening velocity of the contacts. The contact pairs of AgWC/AgCdO are superior to $AgWC/AgSnO_2In_2O_3$ or AgWC/AgC contact pairs in the contact erosion.

• 소성∙가공
• /
• 제16권2호
• /
• pp.138-143
• /
• 2007

Superplastic forming/diffusion bonding (SPF/DB) processes were analyzed using a 3-D rigid visco-plastic finite element method. A constant-triangular element based on membrane approximation and an incremental theory of plasticity are employed for the formulation. The coulomb friction law is used for interface friction between tool and material. Pressure-time relationship for a given optimal strain rate is calculated by stress and pressure values at the previous iteration step. In order to improve the contact searching, hierarchical search algorithm has been applied and implemented into the code. Various geometries including sandwich panel and 3 sheet shape for 3-D SPF/DB model are analyzed using the developed program. The validity fer the analysis is verified by comparison between analysis and results in the literature.

• 전기학회논문지
• /
• 제64권4호
• /
• pp.592-597
• /
• 2015

3D-IC is a novel semiconductor packaging technique stacking dies to improve the performance as well as the overall size. TSV is ideal for 3D-IC because it is convenient for stacking and excellent in electrical characteristics. However, due to high-density and micro-size of TSVs, they should be tested with a non-invasive manner. Thus, we introduce a TSV test method on test prober without a direct contact in this paper. A capacitive coupling effect between a probe tip and TSV is used to discriminate small TSV faults like voids and pin-holes. Through EM simulation, we can verify the size of eye-patterns with various frequencies is good for TSV test tools and non-contact test will be promising.

• Tribology and Lubricants
• /
• 제35권1호
• /
• pp.37-43
• /
• 2019

This paper presents an optimization method to determine the shoulder height of an angular contact ball bearing by 3D contact analysis using nondimensional-shaped variables. The load analysis of the ball bearing is performed to calculate the internal load distributions and contact angles of each rolling element. From the results of bearing load analysis and the contact geometry between the ball and inner/outer raceway, 3D contact analyses using influence function are conducted. The nondimensional shoulder height and nondimensional load are defined to give the generalized results. The relationship between the shoulder height and radius of curvature of the shoulder under various loading conditions is investigated in order to propose a design method for the two design parameters. Using nondimensional parameters, the critical shoulder heights are optimized with loads, contact angles, and conformity ratios. We also develop contour maps of the critical shoulder height as functions of internal loads and contact angles for the different contact angles using nondimensional parameters. The results show that the dimensionless shoulder height increased as the contact angle and dimensionless load increased. Conversely, when the conformity ratio increased, the critical shoulder height decreased. Therefore, if the contact angle is reduced and the conformity ratio is increased within the allowable range, it will be an efficient design to reduce the shoulder height of ball bearings.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.67-79
• /
• 2003

The purpose of this study is to investigate the effective skill motion through the kinematic analysis of the Yurchenko Streched motion in new horse vaulting. The subjects in this study were 3 male gymnasts who were ranked as national athletes. After the 3D motion analysis, kinematic variables were analyzed to comparison with the difference between this study and the previous study(Yang, D. Y and Lee, C. S, 1999). As a result, the following conclusions was drawn; 1. In the board contact phase, this study showed a shorten contact time to maintain in condition highly extension of hip and hee angle than the previous study. 2. In the pre-flight phase, this study appeared more shortly flight duration time and horizontal flight displacement than the previous study. 3. In the horse contact phase, the contact duration time and horizontal displacement of COG shortened than the previous study, but appeared to the fast horizontal and vertical velocity and highly extension of shoulder an. 4. In the post-flight phase, a stable horse contact appeared to the increase of the flight duration time and the apex height during the post-flight. And it showed that these results have a stable and good landing.

• 반도체디스플레이기술학회지
• /
• 제17권4호
• /
• pp.86-90
• /
• 2018

Standards related to express the non-flatness of a wafer are reviewed and discussed, for example, bow, warp, and sori. Novel wafer warpage measurement method is proposed for 3D stacked IC application. The new way measures heat transfer from a heater to a wafer, which is a function of the contact area between these two surfaces and in turn, this contact area depends on the wafer warpage. Measurement options such as heating from room temperature and cooling from high temperature were experimentally examined. The heating method was found to be sensitive to environmental conditions. The cooling technique showed more robust and repeatable results and the further investigation for the optimal cooling condition is underway.