• Journal of Microbiology and Biotechnology
• /
• 제10권1호
• /
• pp.21-26
• /
• 2000

A microarrayer system was developed mainly for manufacturing DNA chips. The 3-axis robot was designed to automatically collect samples from 96-or 384-well microtiter plates using up to 16 simultaneously moving pens and to deposit them on a surface-modified slide glass. This is followed by a wash/dry operation in a clean station. The cycle is repeated with a new set of samples, This system can deposit cDNA or oligonucleotides with spot intervals of $150{\;}\mu\textrm{m}$ and the spot size of $80\mu\textrm{m}$, thus allowing a high density DNA chip containing about 5,000 spots per $\textrm{cm}^2$. The entire procedure is controlled by the Visual C++ program that was written in our laboratory by using a personal computer with Pentium 100 CPU.

• 대한방사선치료학회지
• /
• 제23권1호
• /
• pp.13-19
• /
• 2011

목 적: 체부 정위방사선치료 시 치료 효과 향상을 위해서는 병소 부위의 정확한 위치 파악과 함께 호흡에 의한 종양의 움직임을 최소화하는 것이 필수적이다. 이에 본 연구에서는 기존에 자체 개발하여 사용 중인 호흡운동 감소기구를 보다 사용이 편리하고 효과적이도록 개선하여, 체부 정위방사선치료에 있어서 임상 적용의 유용성을 평가하였다. 대상 및 방법: 자체 개발하여 사용 중이던 기존 호흡운동 감소기구의 장단점을 분석하여 재현성과 사용 정확도를 개선하였다. 그리고 개선된 호흡운동 감소기구를 체부 정위방사선치료에 활용하기 위한 유용성 평가 방법으로 첫째, 8명의 폐종양 환자에 대해 들숨(inhalation)과 날숨(exhalation) 상태에서 획득한 고속(spiral) 전산화단층촬영 영상을 통해, 호흡에 따른 종양 움직임을 3차원적으로 정량 분석하였다. 둘째, 선량 평가를 위해 EBT2 필름(Gafchromic, ISP, USA)을 장착할 수 있는 폴리에틸렌 팬텀과 3차원적 종양 움직임을 재현하기 위한 2축의 직교좌표 로봇(Cartesian Robot-2Axis, FARA RCM4H, Samsung Mechatronics, Korea)을 제작하였다. 그리고 전산화단층촬영에서 획득한 결과를 바탕으로 호흡운동을 재현하여, 등선량 곡선 및 2차원 등선량 프로파일을 분석하였다. 결 과: 벨크로 벨트로 제작된 사용이 편리하고 재현성이 우수한 호흡운동 감소기구를 개발하였다. 전산화단층촬영 영상으로 분석한 폐암환자의 호흡에 따른 3차원적인 종양의 움직임은 좌우, 전후, 두미측 방향에 따라 평균 3.2 mm, 4.3 mm, 13.0 mm로 나타났다. 팬텀과 직교좌표 로봇을 이용한 호흡에 의한 선량분포 특성변화의 결과로는, 치료계획 선량보다 방사선을 적게 받은 영역은 두미측 방향으로 각각 8.0%와 16.8%, 좌우측 방향으로 각각 8.1%와 10.9%로 후미측 방향의 선량 왜곡이 가장 크게 나타났고, 길이는 평균 4.2 mm이었다. 호흡주기에 따른 선량 왜곡의 변화는 크게 나타나지 않았다. 결 론: 본 연구를 통해 장기의 움직임을 최소화할 수 있는 사용이 편리하고 효과적인 호흡운동 감소기구를 개발하였다. 개발된 기구를 사용할 경우 평균 6 mm 정도의 CTV-PTV 마진을 사용하면 호흡에 따른 과소선량(underdose)을 극복할 수 있을 것으로 결과를 통해 확인하였다. 이로서 개발된 호흡운동 감소기구는 체부 정위방사선치료에 있어서 호흡동조 방법을 병행할 수 있는, 임상 적용이 용이한 효과적인 보조기구로 활용할 수 있을 것으로 사료된다.

• 한국전자통신학회논문지
• /
• 제7권5호
• /
• pp.1139-1144
• /
• 2012

산업용 로봇의 하중률은 1대 10에서 1대 30이고, 3대 1의 하중률을 가지는 인간과 비교하여 매우 낮다. 다음 세대 로봇의 목표 중에 하나는 하중률이 될 것이고, 이것은 가벼운 로봇을 개발함으로 가능할 것이다. 2관절 유연한 로봇팔은 관절 축을 회전할 때 진동이 발생한다. 본 논문에서는 유연한 로봇팔의 진동 동력학은 오일러 베르누이의 보 이론과 라그랑지 방정식을 이용하여 구하였고, $\dot{D}-2C$가 skew symmetric이다는 사실을 사용하여, 계산량을 줄이는 리아프노프 안정도 이론을 이용한 단순한 구조의 새로운 제어기를 제안한다. 2링크 유연한 로봇에 대한 확정적인 적응제어 법칙을 제안하고, 시뮬레이션을 통하여 그 타당성을 보인다.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2530-2544
• /
• 2018

In this paper, we propose an enhanced LiDAR-camera calibration method that extracts the marker plane from 3D point cloud information. In previous work, we estimated the straight line of each board to obtain the vertex. However, the errors in the point information in relation to the z axis were not considered. These errors are caused by the effects of user selection on the board border. Because of the nature of LiDAR, the point information is separated in the horizontal direction, causing the approximated model of the straight line to be erroneous. In the proposed work, we obtain each vertex by estimating a rectangle from a plane rather than obtaining a point from each straight line in order to obtain a vertex more precisely than the previous study. The advantage of using planes is that it is easier to select the area, and the most point information on the board is available. We demonstrated through experiments that the proposed method could be used to obtain more accurate results compared to the performance of the previous method.

• 로봇학회논문지
• /
• 제17권1호
• /
• pp.25-31
• /
• 2022

Moving among multiple floors is one of the most challenging tasks for indoor autonomous robots. Most of the previous researches for indoor mapping and localization have focused on singular floor environment. In this paper, we present an algorithm that creates a multi-floor map using 3D point cloud. We implement localization within the multi-floor map using a LiDAR and an IMU. Our algorithm builds a multi-floor map by constructing a single-floor map using a LOAM-based algorithm, and stacking them through global registration that aligns the common sections in the map of each floor. The localization in the multi-floor map was performed by adding the height information to the NDT (Normal Distribution Transform)-based registration method. The mean error of the multi-floor map showed 0.29 m and 0.43 m errors in the x, and y-axis, respectively. In addition, the mean error of yaw was 1.00°, and the error rate of height was 0.063. The real-world test for localization was performed on the third floor. It showed the mean square error of 0.116 m, and the average differential time of 0.01 sec. This study will be able to help indoor autonomous robots to operate on multiple floors.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.721-729
• /
• 2015

A sensorless control method was recently investigated in the robot and automation industry. This method can solve problems related to the rise of manufacturing costs and system volume. In a vector control method, the rotor position estimated in the sensorless control method is generally used. This study is based on a conventional full-order flux observer. The proposed full-order flux observer estimates both currents and fluxes. Estimated d- and q-axis currents and fluxes are used to estimate the rotor position. In selecting the gains, the proposed full-order flux observer substitutes gain k for the speed information in the denominator of the gain for fast convergence. Therefore, accurate speed control in a low-speed region can be obtained because gains do not influence the estimation of the rotor position. The stability of the proposed full-order flux observer is confirmed through a root-locus method, and the validity of the proposed observer is experimentally verified using a surface permanent-magnet synchronous motor.

• Journal of Biosystems Engineering
• /
• 제26권2호
• /
• pp.163-168
• /
• 2001

A manipulator for test-cup attachment modules, which was a part of a robot milking system, was developed to reduce cost and labor for cow milking processing. A Cartesian coordinate manipulator was designed for the milking process, because it was quite flexible and can be constructed more economically than any other configuration. The manipulator was made use of DC motors, screws for power transmission, a RS422 interface system for the transmission of coordinate values and a one-chip microprocessor, 89C52. Performance tests of the manipulator were conducted to measure experimentally the precision of all axes. Some of the results are as follows. 1. The Cartesian coordinate manipulator was designed and built. Dimension of the three perpendicular axes (X, Y, and Z) and one arm’s axis(W) to pick up and transfer the modules were 700㎜$\times$450㎜$\times$550㎜$\times$650㎜. The arm’s axis moved the teat-cup attachment module, which attached four teat-cup to four teats, detached four teat-cup from four teats, was designed and manufactured by using CAD, CAM and CNC. 3. After 10 replications of exercising the manipulator, mean precision values(positioning error) of X, Y, Z axes wee 0.48㎜, 0.20㎜, 0.19㎜, respectively. Therefore, we conclude the axes to have a precision better than 0.5㎜, had no problem to operate correctly the milking manipulator.

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.62-67
• /
• 2009

Welding deformation during the assembly process is affected by not only local shrinkage due to rapid heating and cooling, but also root gap and misalignment between parts to be welded. Therefore, the prediction and control of welding deformation have become of critical importance. In this study, it was focused on the development of the 3-axis apparatus for real-time measurement of the welded deformation. To achieve the objective, a D-H algorithm has been carried out to check the behavioral and performance evaluation for the developed robot. The sequence experiments were taken the base materials of $400{\times}200{\times}4.5mm$ plate for butt welding. The real-time experimental measurements are in good agreement with the measured results.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.35-44
• /
• 2009

The purpose of this paper is to describe experimental results about the T-joint welding of the high power continuous wave (CW) fiber laser for SAPH steel plate for seat frame of car. The seat rail is a part of seat frame of cars. The assembling method is mostly fix up using a bolt and nut. But this assembling method has many demerits in productivity such as increasing work process and material cost. This paper presents an experimental study about Laser T-Joint weldability of seat rail. Laser welding has many advantages in lightness and saving material costs of seat frame. The laser beam was moved along the work pieces by six axis robot with process optical fiber. The laser beam is focused with a welding head within incident angle $15{\sim}45^{\circ}$ for the purpose of the T-joint welding through two side full penetration. The range of the root gap size is less than ${\leq}0.4mm$. Optical microscopy SEM were performed to observe the micro structures and determine the structures of welded zone.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.90-95
• /
• 2008

The letters and marks on the hull of vessels are marked by welding bead or steel plate to resist the corrosion environment. It has done by manual work. So, it cause deterioration of welding quality and process delay and so on. The automated welding device for draft mark has developed partially in the field of shipbuilding. But it can be used for draft mark only. And it has caused a few problems about that workablity and movablity are decreased owing to the size and weight of device. So we developed the automated welding device that can be used for most letters and marks on the hull. It designed to 3 axises mobile robot include to ratoation axis and stand alone type controller with multi GUI base on imbedded windows.