• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.3
• /
• pp.17-30
• /
• 2011

The polarizer is an important optical element used in a variety of applications. Nano-wire grid polarizers in the form of sub-wavelength metallic gratings are an attractive alternative to conventional polarizers, because they provide high extinction ratio. This study has been carried out to fabrication of the 17inch area size nano-wire grid polarizer(NWGP) The master for NWGPs with a pitch of 200nm and the area size $730mm{\times}450mm$ were fabricated using laser interference lithography and aluminum sputtering and wet etching. And The NWGP fabrication process was using by the Roll to-Roll UV imprinting and was applied to flexible PET film. The results were a transmission of light (Tp) 46.7%, reflectance (Rs) 40.1% and Extinction ratio of above 16 for the visible light range.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.297-308
• /
• 1995

This study was designed to measure the absorbed dose to organs of special interest from full mouth with intraoral film(l4 films) and to compare the five periapical techniques. Thermoluminescent crystals(TLD-100 chip) were located in brain, orbit, bone marrow of mandibular ramus, bone marrow of mandibular body, bone marrow of 4th cervical spine, parotid gland, submandibular gland and thyroid gland. X -ray machine was operated at 70kVp and round collimating film holding device(XCP) and rectangular collimating film holding device(Precision Instrument) were used. The distance from the X-ray focus to the open end of the collimator was 8 inch, 12 inch and 16 inch. The results were as follows : 1. The absorbed dose was the highest in bone marrow of mandibular body(5.656mGy) and the lowest in brain (0.050mGy). 2. Generally, the lowest absorbed dose was measured from 16 inch cylinder, rectangular collimating film holding device with paralleling technique. But, in bone marrow of mandibular body and the floor of mouth, the highest absorbed dose was measured from 12 inch cylinder, rectangular collimating film holding device with paralleling techniques. 3. Comparing of five intraoral radiographic techniques, it was appeared statistically significant reduction of the absorbed doses measured with rectangular collimating film holding device compared to XCP film holding device (P<0.05). 4. No statistically significant reduction in the absorbed dose was found as cylinder length was changed(P>0.05).

• Journal of radiological science and technology
• /
• v.4 no.1
• /
• pp.55-62
• /
• 1981

This study was conducted, during the period of 20-30th, July in 1981, to survey measurement methods in thyroid uptake rate test in Seoul city. The results were summarized as follows: 1. For the great part of nuclear medcine department, a mount of radioiodine($^{131}I$) administrated to the patients was $50-100{\mu}Ci$ in thyroid uptake rate test. 2. Distribution of scintillation, counter with crystal size of $1\frac{1}{2}inch$ was 43%, 3inch(22%), 2.5inch(14%) and $2\frac{1}{2}inch$ was 7% in RAI uptake rate test. 3. When RAI uptake rate test was performed, distribution of collimator in use was flat field type collimator(78%) in general and cylindrical type collimator was 22%. 4. High voltage applied to the P-M tube was $900{\sim}1000V$(50%) and most units provided $3{\sim}15%$ of the window range for the $^{131}I$ peak $\gamma-ray$ energy. 5. Distribution on the use of neck phantom for measurements standard solution was 57% and distribution of b filter in use for room background counts and extrathyroidal tissue was 43% and 50%. 6. The distance between the counter and the source was 25cm(58%) in measuring radioactivity of standard solution, thyroid tissue and background radioactivity count. 7. The early uptake measurements(2, 4, 6 hours) are done after administration of the radioiodine dose and also 24-hour and 48-hour uptake measurements are done in routine test.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.587-590
• /
• 1999

Gaze detection is to locate the position on a monitor screen where a user is looking at. We implement it by a computer vision system setting a camera above a monitor, and a user move (rotates and or translates) her face to gaze at a different position on the monitor. Up to now, we have tried several different approaches and among them the Two Neural Network approach shows the best result which is described in this paper (1.7 inch error for test data including facial rotation. 3.1 inch error for test data including facial rotation and translation).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.3
• /
• pp.264-268
• /
• 2005

A 2.2-inch QCIF+(176${\times}$RGB${\times}$220) TFT-LCD with integrated row driver was developed using a standard amorphous silicon TFT technology. At low temperature, the integrated row driver operation is dramatically effected by the electron drift mobility reduction(■50 %) and the threshold voltage shift (■1V) of the a-Si TFT. We studied the dependency of circuit design and found that higher on-current circuit is important to guarantee good operation in wide temperature range.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.18 no.1
• /
• pp.203-212
• /
• 1988

This study was designed to observe mandibular condyle shape and position in an asymptomatic popular ion. Using Accurad-200 head holder(Denar Corp.) for transcranial radiography of the temporo-mandibular joint region, transcranial radiographs were taken at the centric occlusion and 1 inch mouth opening in 73 males and females who were asymptomatic for TMJ disturbances, had no severe carious or missing teeth, and no history of prosthodontic or orthodontic treatments. Mandibular condyles were classified morphologically at the centric occlusion and evaluated in positional relationship with mandibular fossa and articular eminence at the centric occlusion and 1 inch mouth opening. The results were as follows: 1. In the morphologic classification of mandibular condyle, the convex shape was more prevalent in an asymptomatic population(90.4%), the locally concave shape and wedge shape were 5.5%, 4.1%. 2. At the centric occlusion, the means of joint space were 3.43nm superiorly, 2.17㎜ anteriorly, and 2.61㎜ posteriorly. 3. At the centric occlusion, the mandibular condyles were placed slightly anterior to the center of their fossa. 4. At the 1 inch mouth opening, the mandibular condyles were placed anterior to the articular eminence more than posterior to or below the top of the articular eminence.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.638-644
• /
• 2020

This study examines cracks that occur under the load of an aircraft. The life of aircraft vulnerability structures was analyzed and structural fitting improvements were made. Structural integrity and safety have been achieved through preemptive life expectancy and life management of aircraft structures. The crack size inspection capability of the aircraft under analysis is 0.03inch, compared with 0.032inch, which is the lowest of the three vulnerable parts. In addition, the fatigue life analysis results in approximately 1450 operating hours, the lowest of the three vulnerable parts relative to the aircraft's required life of more than 15000 operating hours, which increased the repeat count of the aircraft's initial and re-inspection times, and hence raised the resulting costs and manpower consumption. Finally, the features were improved through structural fitting of the identified three weak parts. The lowest critical crack size was secured at 0.13 through increased structural resistance to generated cracks and increased aircraft safety. The lowest structural fatigue life for cracks occurring during aircraft operation is 25000 operating hours, which are analyzed above the required structural life, resulting in more optimized improvements than the repair costs and excessive fitting range caused by cracks and fractures.

• Clean Technology
• /
• v.7 no.1
• /
• pp.65-74
• /
• 2001

Modified dip-coating method 8.3 times shorten in solution volume-coated and 83.3 times in coating time than existing dip-coating method. Coating weight increased nearly 2~3 times. So modified dip-coating method is evaluated that it is economic and has a efficiency. When we make an experiment in coated $LaCoO_3$ on ceramic monolith in modified dip-coating method which use 2 coating applications with relative viscosity $0.006202kg{\cdot}m/sec$, it showed a superior reaction at 88.56mg per ceramic unit gram in NO-CO reaction(optimum coating amount). When we make an experiment in the same size of ceramic filter cell with different conditions 100, 200cell per square inch, the result in low temperature($200^{\circ}C{\sim}350^{\circ}C$), 200cell3 per square inch is 6~23% higher in NO reduction and 11% in CO oxidation than 100cell per square inch. It is because the more the number of cells in the ceramic filter increase, the more catalytic surface area is expanded.

• Water for future
• /
• v.7 no.2
• /
• pp.75-82
• /
• 1974

본시험은 관개 및 배수 설계를 위한 기초자료 제공을 목적으로 토양수분 및 지하수위의 변화상태를 구명하고자 하는 것으로 카나다 퀴백(Quebec) 지방 저지대의 대표적인 2종의 태양인 점토와 사질로움 토양에 대해서 일차적으로 지표, 지하배수간의 토양수분과 지하수위의 변화를 연구분석한 것으로 그 결과를 요약하면 다음과 같다. 1. 2종의 토양(점토, 사질로움)에 있어서 공히 토양수분은 지표로부터 지하로 내려갈수록 증가되는 상태를 나타냈으면 이는 하층토로 내려감에 따라 팽창된 치밀한 토양 조직을 가지고 있음을 시사하며 2. 동기에 있어서는 지표로부터 12inch 깊이의 토양수분이 더 깊은 18inch나 24inch 깊이의 토양수분보다 증가된 상태를 유지하였다. 이는 토양내의 빙결막이나 지표면의 눈 또는 어름에 영향으로 생각되며 이 경향은 점토질 토양에서 보다 토양내 빙결막으로의 수분 이종을 조장해주는 투수 계수가 큰 사질로움 토양에서 더 높았다. 3. 양식험구 공히 지표에서 얕은 지하 0∼3inch 이내의 토양수분은 항우를 전후해서 급격한 변화를 가져왔다. 여기에서 수분의 급상승은 호우시나 표층토가 하층토의 토양수분에 영향을 주는 항우이전에 포장용수량(Field capacity)에 달했기 때문에 급항하는 지표면의 물 분자가 열에너지에 의해 증발산되고 천층에 산재한 초, 수근에 의해 소비되는 때문인 것으로 사료된다. 4. 지하수위하의 토양수분은 포화에 달하여 거의 일정할 것으로 기대되었지만 실제로 많은 변화를 가져왔다. 이들 변화에는 부분적으로 토양사극이 지하수위하이라도 채워지지 않았거나(Capillary pressure가 작을 시) 혹은 관측기간 중에 토양의 융기와 수축에 기인된다고 생각된다. 5. 지하배수구가 지표배수구에 비해 지하수위항하가 빨랐음은 물론 사질로움 토양에서는 보다 높은 투수계수로 인해서 지하수위의 항하가 점토질 토양에서 보다 훨씬 빨랐음을 보여주고 있다.표시할 수 있다.된다.acid $0.41{\sim}0.65%$, 오미자는 malic acid $1.51{\sim}3.90%$, citric acid $2.40{\sim}3.92%$로 주요 유기산이 있다. 타닌은 물보다 에탄올 추출물이 다소 함량이 높았으며 특히 오갈피는 $3.35{\sim}3.85%$로 매우 높은 함량이었다.a 6 cases, etc. 2. The retroperitoneal space including kidneys were the most commonly involved site (43.5%), of which Wilms' tumor was the commonest. 3. About 2/3 of tumors developed under the age of 6 and the commonest lesion was Wilms' tumor and the next being neuroblastoma, teratoma, ovarian cyst and so forth. 4. In all tumors except ovarian tumor and choledochal cyst, male was more frequently affected. 5. In plain abdomen 75% of neuroblastoma crossed the mid line while in Wilms' tumor only 2 cases (14%) showed midline cross. Calcific density was 입력불가 in all 6 cases of teratoma (100%) as dense and discrete ossification, in 3 case of neuroblatoma (38%) characteristically in diffuse stippled appearance and in one case

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.8 no.1
• /
• pp.43-47
• /
• 1978

The purpose of this study was to investigate the normal range of condylar movement of normal adults. The author has observed roentgenographic images of four serial positions of condylar head taken by modified transcranail lateral oblique projection. The serial positions are centric occlusion, rest position, 1 inch open position and maximal open position. The results were obtained as follow; 1. Inter-incisal distance was 46.85㎜ in maximal open position. 2. The length between the deepest point of glenoid fossa and summit of condylar head in rest position was wider than that in centric occlusion by 0.8㎜. 3. In 1 inch open position, condylar head moved forward from the standard line in 12.64㎜ of horizontal direction and moved downwards from the standard line in 1.84㎜ of vertical direction. 4. In maximal open position, condylar head moved forward from the standard line in 19.06㎜ of horizontal direction and moved downwards from thestanard line in 0.4㎜ of vertical direction. 5. In centric occlusion, the width between glenoid fossa and margin of condylar head was greater in the posterior portion than in the anterior portion by 0.4㎜. 6. Except for the estimated figures of 1 inch open position, all of the estimated figures was greater in male than in female.