• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.133-138
• /
• 1999

3차원 트러스 구조물을 설계대상으로, 구조계와 제어계의 동시최적설계문제에 대하여 고찰하였다. 구조 설계에대한 최소중량설계와 제어 설계에대한 외란 억제문제를 설계목적으로 고려하였다. 그리고, 본연구의 유용성을 입증하기위한 수치 시뮬레이션의 결과를 기술하였다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.1 no.2 s.2
• /
• pp.63-74
• /
• 2001

In this paper the feasibility of Nondestructive Damage Detection (NDD) in large structures is demonstrated via simulating vibration monitoring of such structures. The theory of NDD for truss type structures is formulated. To examine the feasibility of the theory, a finite element model of a 3-D truss structure, which consists of sixteen bays and includes 246 elements, is developed to simulate damage. Four damage cases are simulated numerically and the cases range from the structure being damaged in one location to the structure being damaged in three locations. For the given modal parameters, this study reveals very good results for small amounts of damage as well as large damage.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.3
• /
• pp.319-328
• /
• 2011

This paper introduces the construction of Strut-Tie model based on the Evolutionary Structural Optimization(ESO) method. Differently from conventional ESO method which uses plane stress elements, the introduced approach adopts the use of truss elements with the fact that the optimum topology of structures by ESO method is open a truss-like structure. Several examples are provided to demonstrate the capability of the proposed method in finding the best Strut-Tie models. In advance, it is shown that the introduced method is supported through the correlation studies between two-dimensional plane stress analysis and Strut-Tie models, and can be used effectively in practice, especially in shear design of complex reinforced concrete members where no previous experience is available.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.3
• /
• pp.137-144
• /
• 1985

This paper deals with the adjoint variable method in design sensitivity analysis that is essential to the structure optimization. The method is shown to be much simpler than the conventional method in structure optimization by applying it to the optimal design of finite dimensional structures. Design sensitivity analyses and their numerical solutions for the principal constraints, i.e., displacement and stress constraints under static loads are obtained. Furthermore, it is proved that optimization can be carried out efficiently by applying the optimization algorithm. Structure optimization problems of minimizing the volumes of the truss structures(finite dimensional structures) under the appropriate boundary conditions, loading conditions and constraints are considered.

• Journal of Korean Society of societal Security
• /
• v.2 no.1
• /
• pp.81-89
• /
• 2009

A web-based information management system to share engineering data of truss bridge is developed through construction of standardized database of truss bridge. 3D shape information is stored in database according to AP 203 of STEP, and 3D visualization on the web is implemented by using the web 3D technology that helps users to understand geometrical shape of structures, directly. AP209 is used to store structural analysis information such as finite elements, material properties, and analysis result into relational database. Based on the developed database, a prototype of integrated information management system for truss bridge is developed, and it provides additional information such as specifications and inspection information related with shape object to end users.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.60-68
• /
• 2012

This study describes an analytical and experimental investigation of the pedestrian steel-deck truss bridge in the City of Rochester, New York, U.S.A. This investigation was undertaken to provide assurance that this important bridge continues to be functional for this use. An ambient vibration experiment on full-scale structures is a way of assessing the reliability of the various assumptions employed in the mathematical models used in analysis. It is also the most reliable way of determining the structural parameters of major importance in structural dynamics, such as the mode shapes and the associated natural frequencies. Pedestrian-induced vibrations have been measured on the bridge to determine the displacement and the vertical and transverse dynamic characteristics of the steel deck truss. In the analytical modeling, three-dimensional finite element analysis was developed and validated against the ambient tests.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.1
• /
• pp.41-48
• /
• 2008

Spatial structure is an appropriate shape that resists external force only with in-plane forte by reducing the influence of bending moment, and it maximizes the effectiveness of structure system. the spatial structure should be analyzed by nonlinear analysis regardless static and dynamic analysis because it accompanys large deflection for member. To analyze the spatial structure geometrical and material nonlinearity should be considered in the analysis. In this paper, a geometrically nonlinear finite element model for plane truss structures is developed, and material nonlinearity is also included in the analysis. Arc-length method is used to solve the nonlinear finite element model. It is found that the present analysis predicts accurate nonlinear behavior of plane truss.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2A
• /
• pp.187-196
• /
• 2008

The punching shear strength of RC slabs is estimated analytically by the simple truss model. To avoid intrinsic difficulties in punching shear analysis of reinforced concrete slabs, the slabs were divided into three sub-structures as the punching cone and the remaining parts. The strength of the punching cone was evaluated by the stiffness of inclined strut. The stiffness of springs which control lateral displacement of the roller supports consists of the steel reinforcement which passed through the punching cone. Initial angle of struts was determined by curve fitting method of the experimental data with variable reinforcement ratio in order to compensate for uncertainties in the slab's punching shear, the simplification errors and the stiffness of the remaining sub-structures. The validity of computed punching shear strength by simple truss model was shown by comparing with experimental results. The punching shear strength, which was determined by snap-through critical load of shallow truss, can be used effectively to examine punching shear strength of RC slabs.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.3 s.25
• /
• pp.79-86
• /
• 2007

Recently, as steel structures become higher and more long-spanned, construction of high-strength steels is increasing gradually. Application of high-strength steel can be possible to make a more light and economic steel structures by reducing thickness and space. To apply a high-strength steel to structure, criteria of high-strength steel for buckling is required. However, current specification is not sufficient for criteria of high-strength steels. In this paper, buckling behavior of high-strength steel truss columns with box sections is investigated by using three-dimensional elastic-plastic finite deformation analysis program. The criteria equation for allowable compressive stress of high-strength steel truss columns with box sections is proposed and confirmed the applicability. It is reasonable form analytical results that formulated equations after finding the upper limit of allowable axial direction compression stresses of high-strength steel truss columns. And new equation is suitable to buckling design of high-strength steel truss columns.

• Journal of Power System Engineering
• /
• v.8 no.1
• /
• pp.69-74
• /
• 2004

A structure-control combined optimal design problem is discussed taking a 3-D truss structure as a design object. We use descriptor forms for a controlled object and a generalized plant because the structural parameters appear naturally in these forms. We consider not only minimum weight design problem for structure system, but also suppression problem of the effect of disturbances for control system as the purpose of the design. A numerical example shows the validity of combined optimal design of structure and control systems. We also consider the validity of sensor-actuator collocation for control system design in this paper.