• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.36-43
• /
• 2012

Purpose: To analyze the stress distribution of the implant and its supporting structures through 3D finite elements analysis for implants with different hexagon heights and to make the assessment of the mechanical stability and the effect of the elements. Materials and methods: Infinite elements modeling with CAD data was designed. The modeling was done as follows; an external connection type ${\phi}4.0mm{\times}11.5mm$ Osstem$^{(R)}$ USII (Osstem Co., Pusan, Korea) implant system was used, the implant was planted in the mandibular first molar region with appropriate prosthetic restoration, the hexagon (implant fixture's external connection) height of 0.0, 0.7, 1.2, and 1.5 mm were applied. ABAQUS 6.4 (ABAQUS, Inc., Providence, USA) was used to calculate the stress value. The force distribution via color distribution on each experimental group's implant fixture and titanium screw was studied based on the equivalent stress (von Mises stress). The maximum stress level of each element (crown, implant screw, implant fixture, cortical bone and cancellous bone) was compared. Results: The hexagonal height of the implant with external connection had an influence on the stress distribution of the fixture, screw and upper prosthesis and the surrounding supporting bone. As the hexagon height increased, the stress was well distributed and there was a decrease in the maximum stress value. If the height of the hexagon reached over 1.2mm, there was no significant influence on the stress distribution. Conclusion: For implants with external connections, a hexagon is vital for stress distribution. As the height of the hexagon increased, the more effective stress distribution was observed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.1
• /
• pp.34-41
• /
• 2022

Recently, digital technology and computer-aided design/computer-aided manufacturing (CAD/CAM) environment have changed the clinician treatment method in the fabrication of dentures. The denture manufacturing method with CAD/CAM technology simplifies the treatment and laboratory process to reduce the occurrence of errors and provides clinical efficiency and convenience. In this case, complete dentures were fabricated using stereolithography (SLA)-based 3D printing in patient with mandibular deviation. Recording base were produced in a digital model obtained with an intraoral scanner, and after recording a jaw relation in the occlusal rim, a definitive impression was obtained with polyvinyl siloxane impression material. In addition, facial scan data with occlusal rim was obtained so that it can be used as a reference in determination of the occlusal plane and in arrangement of artificial teeth during laboratory work. Artificial teeth were arranged through a CAD program, and a gingival festooning was performed. The definitive dentures were printed by SLA-based 3D printer using a Food and Drug Administration (FDA)-approved liquid photocurable resin. The denture showed adequate retention, support and stability, and results were satisfied functionally and aesthetically.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.3
• /
• pp.189-198
• /
• 2017

Purpose: This study aims to analyze the stress distribution of mandibular molar restoration supported by the implants with external hex and internal taper abutment connection design. Materials and Methods: Models of external connection (EXHEX) and internal connection (INCON) implants, corresponding abutment/crowns, and screws were developed. Supporting edentulous mandibular bony structures were designed. All the components were assembled and a finite element analysis was performed to predict the magnitude and pattern of stresses generated by occlusal loading. A total of 120 N static force was applied both by axial (L1) and oblique (L2) direction. Results: Peak von Mises stresses produced in the implants by L2 load produced 6 - 15 times greater than those by L1 load. The INCON model showed 2.2 times greater total amount of crown cusp deflection than the EXHEX model. Fastening screw in EXHEX model and upside margin of implant fixture in INCON model generated the peak von Mises stresses by oblique occlusal force. EXHEX model and INCON model showed the similar opening gap between abutment and fixture, but intimate sealing inside the contact interface was maintained in INCON model. Conclusion: Oblique force produced grater magnitudes of deflection and stress than those by axial force. The maximum stress area at the implant was different between the INCON and EXHEX models.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.10
• /
• pp.49-57
• /
• 2013

Recently, recycling of the industrial by-products has been an important issue of the Yeosu bay, where large industrial complex is located. Major industrial by-products which are produced from Yeosu industrial complex area are phosphogypsum and flyash, which are about 82% and 10% of the 1.6 million tons industrial by-products. Moreover since the Yeosu industrial complex is located at seaside, phosphogypsum has been pointed as cause of serious environmental contaminant from the regional society. Therefore recycling study can't be delayed anymore. In this paper, artificial aggregate was manufactured by non-sintering process from industrial byproducts - e.g., phosphogypsum and slag - as a geotechnical drainage material. To show the feasibility of the artificial aggregate as a geotechnical drainage material, geotechnical experiments including particle size analysis, permeability test, and large scale direct shear test were carried out. Test results show that the permeability of the artificial aggregates range from $6.94{\times}10^{-1}cm/sec$ to $8.86{\times}10^{-1}cm/sec$, which is much larger value than those are required for the drainage material from the construction specification in Korea, and the friction angle of the artificial aggregate is as large as that of sand in water immersion conditions. From the test results, it was concluded that artificial aggregate made from industrial by-products can be used successfully as a geotechnical drainage material.

• Journal of Korean Academy of Nursing
• /
• v.22 no.4
• /
• pp.454-463
• /
• 1992

세계가 일일 생활권화 됨과 더불어 국제교류가 활발해지므로써 횡문화 간호 연구는 전문직 간호(Professional Nursing)에 있어서 매우 중요한 부분을 차지하고 있음을 많은 문헌을 통해서 알 수 있다(Brink, 1976 : Leininger, 1977 : Roberston & Boyle, 1987). 횡문화 간호연구는 서로 다른 문화적 배경을 가진 사람들을 잘 이해하고 그들의 건강을 돌봄에 있어서 더욱 효과적이고, 안전한 간호를 할 수 있을 뿐만 아니라 간호이론 개발, 간호모형(Model) 개발에 있어서도 매우 중요한 역할을 한다고 믿는다. 본 연구는 1984년에서 1987년 사이에 전문적 간호연구지에 실린 10편의 횡문화 간호연구와 관련된 논문들을 발췌하여 간호지식체의 본질적인 과정인 비판적 문헌고찰을 통해 각 논문들을 비교 분석 한 것으로써, 미래의 간호연구를 위한 간호실무, 간호교육, 간호연구 방법 및 간호 행정면에서 그 적용성을 높여줄 것이다. 비판적 문헌고찰을 위한 기준은 Burns와 Grove(1987)의 방법을 참고하여 아래와 같이 선정하였다. 1. 분석대상 : 목적, 가설 진술, 문헌고찰, 표본조사, 방법론적 논점, 결과 해석 2. 이론적 틀의 유도 흑은 통합 3. 발전적인 간호수행을 위한 중요성, 적용성 및 제언 이상의 내용으로 비교 분석을 해본 결과 1984년에서 1987년 사이에 발표된 횡문화 간호에 관한 논문들의 주제는 주로 여성을 대상으로 한 건강돌봄, 자가간호, 건강신념, 수유, 임신 그리고 간호사와 소수민족 노인과의 의사소통 양상 등으로 나누어 볼 수 있었다. 이론적 틀은 주로 사회학, 정신심리학, 인류학 이론으로부터 도출되었고, 오직 두 편만이 간호 이른에 틀을 둔 것으로 나타났다. 1. 10개의 논문의 가설과 목적의 분석에 있어서 4편의 논문은 목적과 가설이 구체적으로 진술되어 있었고, 나머지 6편은 목적이 전반적으로 진술되어 있었으며 가설도 구체적이지 않았다. 이러한 제한점은 각 논문의 연구자가 문헌고찰을 충분히 하지 못하고 단지 수편의 논문만을 제시 한 데서 비롯되었다고 분석 해 볼 수 있겠다. 2. 문헌고찰 부분에서는 각각의 연구주제를 지지해줄 수 있는 문헌들이 충분히 고찰되지 못하였고, 이론적배경 또한 횡문화 이론과의 관련성이 적었다. 또한 횡 문화 연구에 기초가 되는 연구대상자의 사회 인구학적 특성과 역사적 배경은 잘 나타났으나, 이론적 연구와 경험적 연구 간에 괴리가 있었다. 3. 표본추출방법은 문화에 기반을 둔 대상자를 선정한다는 점에서 한계성 이 있었다. 4. 방법론적 이유로는 대상자와의 면담시간이 구체적으로 기술되지 않았으며, 고유한 언어를 통역하는 과정에서 의미론적 문제에 대한 고려가 부족하였다. 면접과 기록과정에서 보면 자료의 기록과정과 분류 및 분석과정이 명시되어 있지 않았다. 참여관찰과 면접방법을 사용시 이에 대한 자세한 기술이 되어 있지 않았다. 5. 연구결과의 적용 및 이에 대한 논의는 상당히 제한되어 있었는데, 수편의 연구만이 방법론 문제점과 앞으로의 연구분야에 대한 전망을 제시하였으며, 특이한 것은 어 떤 연구자도 이른 개발을 위한 적용 및 임상실무적 차원에서 간호에 대한 제언을 하지 않았다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.233-245
• /
• 2011

With the use of computed tomography (CT), computer-aided design/computer-assisted machining (CAD/CAM) technology and internet, the implant dentistry has been evolved. The surgical templates made by CAD/CAM technology and precise installation of implants, permit restorations to be inserted immediately after implants have been placed. The advantages of CAD/CAM guided implant procedures are flapless, minimally invasive surgery and shorter surgery time. With this technique, less postoperative morbidity and delivery of prosthesis for immediate function would be possible. A patient with an edentulous maxilla and mandible received 7 implants in mandible using CAD/CAM surgical templates. Prefabricated provisional fixed prostheses were connected immediately after implant installation. Provisional prostheses were evaluated for aesthetics and function during 6 months. Definitive prostheses were fabricated. At 6 months recall appointment, patient's occlusion was slightly changed. To prevent additional adverse effect, regular check-up and occlusal adjustment would be needed.

• Journal of Korean Medical classics
• /
• v.19 no.4
• /
• pp.182-192
• /
• 2006

통과대복의육십사괘차서도(通過對伏義六十四卦次序圖), 방도(方圖), 원도적연구(圓圖的硏究), 이급장개빈대육십사괘방원도중소천발적의역학내용적연구(以及張介賓對六十四卦方圓圖中所闡發的醫易學內容的硏究), 득출여하결론(得出如下結論): 1. 육십사괘적생성원리중(六十四卦的生成原理中), 존재소강절적일분위이법설화번사전적일정팔회설(存在邵康節的一分爲二法設和繁辭傳的一貞八悔說), 이사지횡향배열적도(而使之橫向排列的圖), 칭위복의육십사괘차서원(대횡도)(稱爲伏義六十四卦次序圓(大橫圖)). 종차원(從此圓), 가청초지효육십사괘적생성근원(可淸楚知曉六十四卦的生成根源). 2. 복의육십사괘원도(伏義六十四卦圓圖), 파대횡도분위료양부분(把大橫圖分爲了兩部分), 즉전삼십이괘종좌상방향하진행료배치(卽前三十二卦從左上方向下進行了配置), 이후삼십이괘종우상방향하원형진행료배치(而後三十二卦從右上方向下圓形進行了配置). 차원이자오묘유위중심청초지현시출료양시(자)(此圓以子午卯酉爲中心淸楚地顯示出了陽始(子)), 양진(묘)(陽辰(卯)), 양극(오)(陽極(午)). 음시(오)(陰始(午)), 음진(유)(陰辰(酉)), 음극(자)등적상(陰極(子)等的象), 체현료천도순환적도리(體現了天道循環的道理). 3. 복의육십사괘방원(伏義六十四卦方圓), 야유래어대횡도(也由來於大橫圖), 역체현료지도원리급선천법상적자연지묘(亦體現了地道原理及先天法象的自然之妙). 4. 복의육십사괘방위원시근거천지지리(伏義六十四卦方位圓是根據天地之理), 재복의육십사괘원도내배치료복의육십사괘방원(在伏義六十四卦圓圖內配置了伏義六十四卦方圓). 저시유주자수차배치적(這是由朱子首次配置的). 원도이원형진행료배치(圓圖以圓形進行了配置), 중공상태체현료천지순환적질서(中空狀態體現了天之循環的秩序), 이방도이방형진행료배치(而方圖以方形進行了配置), 중간충실체현료지지존재적상태(中間充實體現了地之存在的狀態), 기작용균시어중심부(基作用均始於中心部). 방원도중포함착일개월적변화(方圓圖中包含着一個月的變化), 일년적운행(一年的運行), 129,600년지우주일년적변화(年之宇宙一年的變化), 천지적종시(天地的終始), 인물적생사(人物的生死), 고금세변적원리등(古今世變的原理等). 5. 장개빈확립료용역학원리해석의학적의역학(張介貧確立了用易學原理解釋醫學的醫易學), 파육십사괘방원여인체진행결합작료천발(把六十四卦方圓與人體進行結合作了闡發). 기일(基一), 기인위육십사괘원도적중심시태극(基認爲六十四卦圓圖的中心是太極), 차부상당어인체지심, 이건남곤북화리동감서(而乾南坤北和離東坎西), 분별대응어상수하복화좌우이목(分別對應於上首下腹和左右耳目). 기이(基二), 원도이사등분적사상(圓圖以四等分的四象), 파인생분위료사분(把人生分爲了四分), 병분별진행료배속(幷分別進行了配屬). 저설명료파육십사괘여 "소문·상고천진론" 중이팔수위변적장부원리(這設明了把六十四卦與『素問·上古天眞論』中以八수爲變的丈夫原理), 소진행적배속관계(所進行的配屬關係). 기삼(基三), 기인위재원도중(基認爲在圓圖中), 여동양시생적복괘(천근)여음시생적구괘(월굴), 相互交替進行循環一樣, 인적생장쇠로적도리화일일중오매적도리시일양적(人的生長衰老的道理和一日中寤寐的道理是一樣的). 기사(基四), 기재원도중(基在圓圖中), 이천양재남화천부족서북(以天陽在南和天不足西北), 래설명료건재남화곤재북적도리(來說明了乾在南和坤在北的道理), 병재방토중이지강재북화지불만동남(幷在方土中以地剛在北和地不滿東南), 래설명료건재서북화건재동남적도리, 이육십사괘적원리여의학밀접결합, 대지진행료설명(對之進行了說明).

• Resources Recycling
• /
• v.22 no.4
• /
• pp.38-45
• /
• 2013

The porous ceramic beads using mine tailing were prepared and applied to catalytic converter for NOx/SOx removal. Catalytic support was used synthesized mesoporous silica (SBA-15) which coated on surface. Internal structure for porous ceramic beads was composed of three-dimensional network structure and porosity was about 80%. In addition, the specific surface area for mesoporous silica(SBA-15) coated on converter was significantly increased 55 $m^2/g$ compared with 0.8 $m^2/g$ before coating. NOx/SOx removal experiment was performed using $V_2O_5$ and $V_2O_5$/CuO converter. NOx conversion ratio for $V_2O_5$/CuO converter was approximately increased 10% compared to $V_2O_5$ converter. In addition, catalytic converter of $V_2O_5$/CuO was shown to remove 95% of NOx and 90% of SOx at reaction temperature of $350^{\circ}C$, space velocity of 10000 $h^{-1}$ and $O_2$ concentrations of 5%, respectively.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.3
• /
• pp.247-268
• /
• 1996

It has been known for a long time that gonadotropins and steroid hormones play a pivotal role in a series of reproductive biological phenomena including the maturation of ovarian follicles and oocytes, ovulation and implantation, maintenance of pregnancy and fetal growth & development, parturition and mammary development and lactation. Recent investigations, however, have elucidated that in addition to these classic hormones, multiple growth factors also are involved in these phenomena. Most growth factors in reproductive organs mediate the actions of gonadotropins and steroid hormones or synergize with them in an autocrine/paracrine manner. The insulin-like growth factor(IGF) system, which is one of the most actively investigated areas lately in the reproductive organs, has been found to have important roles in a wide gamut of reproductive phenomena. In the present communication, published literature pertaining to the intrauterine IGF system will be reviewed preceded by general information of the IGF system. The IGF family comprises of IGF-I & IGF-II ligands, two types of IGF receptors and six classes of IGF-binding proteins(IGFBPs) that are known to date. IGF-I and IGF-II peptides, which are structurally homologous to proinsulin, possess the insulin-like activity including the stimulatory effect of glucose and amino acid transport. Besides, IGFs as mitogens stimulate cell division, and also play a role in cellular differentiation and functions in a variety of cell lines. IGFs are expressed mainly in the liver and messenchymal cells, and act on almost all types of tissues in an autocrine/paracrine as well as endocrine mode. There are two types of IGF receptors. Type I IGF receptors, which are tyrosine kinase receptors having high-affinity for IGF-I and IGF-II, mediate almost all the IGF actions that are described above. Type II IGF receptors or IGF-II/mannose-6-phosphate receptors have two distinct binding sites; the IGF-II binding site exhibits a high affinity only for IGF-II. The principal role of the type II IGF receptor is to destroy IGF-II by targeting the ligand to the lysosome. IGFs in biological fluids are mostly bound to IGFBP. IGFBPs, in general, are IGF storage/carrier proteins or modulators of IGF actions; however, as for distinct roles for individual IGFBPs, only limited information is available. IGFBPs inhibit IGF actions under most in vitro situations, seemingly because affinities of IGFBPs for IGFs are greater than those of IGF receptors. How IGF is released from IGFBP to reach IGF receptors is not known; however, various IGFBP protease activities that are present in blood and interstitial fluids are believed to play an important role in the process of IGF release from the IGFBP. According to latest reports, there is evidence that under certain in vitro circumstances, IGFBP-1, -3, -5 have their own biological activities independent of the IGF. This may add another dimension of complexity of the already complicated IGF system. Messenger ribonucleic acids and proteins of the IGF family members are expressed in the uterine tissue and conceptus of the primates, rodents and farm animals to play important roles in growth and development of the uterus and fetus. Expression of the uterine IGF system is regulated by gonadal hormones and local regulatory substances with temporal and spatial specificities. Locally expressed IGFs and IGFBPs act on the uterine tissue in an autocrine/paracrine manner, or are secreted into the uterine lumen to participate in conceptus growth and development. Conceptus also expresses the IGF system beginning from the peri-implantation period. When an IGF family member is expressed in the conceptus, however, is determined by the presence or absence of maternally inherited mRNAs, genetic programming of the conceptus itself and an interaction with the maternal tissue. The site of IGF action also follows temporal (physiological status) and spatial specificities. These facts that expression of the IGF system is temporally and spatially regulated support indirectly a hypothesis that IGFs play a role in conceptus growth and development. Uterine and conceptus-derived IGFs stimulate cell division and differentiation, glucose and amino acid transport, general protein synthesis and the biosynthesis of mammotropic hormones including placental lactogen and prolactin, and also play a role in steroidogenesis. The suggested role for IGFs in conceptus growth and development has been proven by the result of IGF-I, IGF-II or IGF receptor gene disruption(targeting) of murine embryos by the homologous recombination technique. Mice carrying a null mutation for IGF-I and/or IGF-II or type I IGF receptor undergo delayed prenatal and postnatal growth and development with 30-60% normal weights at birth. Moreover, mice lacking the type I IGF receptor or IGF-I plus IGF-II die soon after birth. Intrauterine IGFBPs generally are believed to sequester IGF ligands within the uterus or to play a role of negative regulators of IGF actions by inhibiting IGF binding to cognate receptors. However, when it is taken into account that IGFBP-1 is expressed and secreted in primate uteri in amounts assessedly far exceeding those of local IGFs and that IGFBP-1 is one of the major secretory proteins of the primate decidua, the possibility that this IGFBP may have its own biological activity independent of IGF cannot be excluded. Evidently, elucidating the exact role of each IGFBP is an essential step into understanding the whole IGF system. As such, further research in this area is awaited with a lot of anticipation and attention.