• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.2
• /
• pp.86-94
• /
• 2009

This paper deals with the creation of a new, low-cost point/position tracking system that can measure deformations in engineering structures with simple commercially widespread cameras. Though point tracking systems do exist today, such as Stereo Pattern Recognition (SPR) and Projection Moir$\acute{e}$ Interferometry (PMI) systems, they are far too costly to use to analyze small, simple structures because complex optical components such as large flashes, high-resolution cameras and data acquisition systems with several computers are required. We developed a point tracking system using commercial cameras. This system used IR LEDs and commercial IR CCD cameras to minimize the interference posed by other extraneous light sources. The main algorithm used for this system is an optical point tracking algorithm, which is composed of the point extraction algorithm and the point matching algorithm for 3-D motion estimation. a series of verification tests were performed. Then, the developed point tracking system was applied to measure deformations of an acrylic plate under a mechanical load. The measured deformations of the acrylic plate matched well with the numerical analysis results. The results indicate that the developed point tracking system is reliable enough to measure continuous deformed shapes of various engineering structures.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.543-549
• /
• 2013

Motion artifacts of central and autonomic nervous system signals degrades the performance of the bio-signal based human factor analysis. Firstly, we propose a defining method of motion artifact section by analyzing successive image frames. Motion artifact section is defined when the amount of motion is greater than the pre-defined threshold. In here, the amount of motion is estimated by first derivation of image frames at temporal domain. Secondly, we propose another defining method of motion artifact section through designing 2D Gaussian probability density function model by analyzing feature vectors of one cycle of signal such as length and amplitude. The defined motion artifact sections are interpolated on the basis of 1D Gaussian function. At result of applying the method into photoplethysmography signal, we confirmed that the calculated heartbeat rate from the restored photoplethysmography came up to the one from electrocardiography. Also, we found that the video based method generated relatively more false acceptance of motion artifact section and the probability density function based method generated relatively more false rejection of motion artifact section.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.13-20
• /
• 1990

This paper describes an interframe image coding using motion compensated and classified vector quantizer (MC-CVQ). It is essential to carefully encode blocks with significant pels in motion compensated vector quantizers (MCVQ). In this respect, we propose a new CVQ algorithm which is appropriate to the coding of interframe prediction error after motion compensation. In order to encode an image efficiently at a low bit rate, we partition each block, which is the processing element in MC, into equally sized 4 vectors, and classify vectors into 15 classes according to the position of significant pels. Vectors in each class are then encoded by the vector quantizer with the codebook independently designed for the class. The computer simulation shows that the signal-to-noise ratio and the average bit rate of MC-CVQ are 35-37dB and 0.2-0.25bit/pel, respectively, for the videophone or video conference type image.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.643-653
• /
• 2014

High-capacity video, control and situation awareness data should be transmitted efficiently to control robots properly in the ground unmanned system, which requires the technology maximizing the communication range and the data transmission throughput. This technology is connected to the OFDMA(Orthogonal Frequency Division Multiple Access)-MIMO(Multiple Input Multiple Output) transmission technology under the limited bandwidth and transmission power. In this paper, we design MIMO communication system for ground unmanned systems, and investigate the data reception performance experimentally, comparing with SISO(Single Input Single Output) system. Experiment results show that the data reception performance of MIMO is significantly improved compared to that of SISO, e.g. 4dB gain of sensitivity and 5dB of SNR at the value MPR = 1, for the mobile stations with $2{\times}2$ STBC diversity.

• The KIPS Transactions:PartB
• /
• v.9B no.2
• /
• pp.199-204
• /
• 2002

Since motion estimation and motion compensation methods remove the redundant data to employ the temporal redundancy in images, it plays an important role in digital video compression. Because of its high computational complexity, however, it is difficult to apply to high-resolution applications in real time environments. If we have information about the motion of an image block before the motion estimation, the location of a better starting point for the search of an exact motion vector can be determined to expedite the searching process. In this paper, we present an adaptive motion estimation approach bated on temporal correlations of consecutive image frames that defines the search pattern and determines the location of the initial search point adaptively. Through experiments, compared with DS(Diamond Search) algorithm, the proposed algorithm is about 0.1∼0.5(dB) better than DS in terms of PSNR(Peak Signal to Noise Ratio) and improves as high as 50% compared with DS in terms of average number of search point per motion vector estimation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1597-1603
• /
• 2017

The incidence of fire in underground utility tunnel is lower than other fires, but the damage caused by fire can cause social loss due to social management paralysis as well as economic loss. Hereupon, this paper presents the results of an empirical test on the construction of the underground utility tunnel condition monitoring system using the leakage coaxial cable installed in the underground utility tunnel. For this reason, a verification test was conducted by connecting a inductive coupler 200 Mbps power line communication modem with insertion loss characteristics of $-6{\pm}2dB$ to the installed the leakage coaxial cable installed in the underground utility tunnel. As a result, We confirmed sending/receiving of IP cameras up to 500 m. Therefore, it is judged that it is possible to construct a condition monitoring system for underground utility tunnel by using the leakage coaxial cables installed in the underground utility tunnels without installing additional communication lines for data transmission.

• Journal of Broadcast Engineering
• /
• v.26 no.4
• /
• pp.441-452
• /
• 2021

In this paper, we propose a method for generating luma signal mapping function to improve the coding efficiency of luma signal mapping methods in LMCS. In this paper, we propose a method to reflect the cognitive and perceptual features by multiplying the attention map of convolutional neural networks on local spatial variance used to reflect local features in the existing LMCS. To evaluate the performance of the proposed method, BD-rate is compared with VTM-12.0 using classes A1, A2, B, C and D of MPEG standard test sequences under AI (All Intra) conditions. As a result of experiments, the proposed method in this paper shows improvement in performance the average of -0.07% for luma components in terms of BD-rate performance compared to VTM-12.0 and encoding/decoding time is almost the same.

• Journal of Digital Convergence
• /
• v.20 no.1
• /
• pp.301-307
• /
• 2022

Today, each broadcasting station makes the best use of CG (computer Graphics), which is the latest technology in election broadcasting, and competes to attract the eyes of viewers. This paper investigated the history of CG technology and design transitions in election ballot counting broadcasts from the perspective of CG designers. From the 1980s, when computer-based election ballot counting began, to the full-scale use of virtual studios, the image and technology produced by CG while watching the ballot-counting broadcast video of general elections, presidential elections, and local elections. We analyzed the utilization from various angles. In Korea, we started with the EDDS (Election Data Display System) developed in-house, created a database using a computer, and introduced manual animation CG every day from that time. After that, broadcasting stations focused on diverse and gorgeous CG image competition, and CG images were expanded from 2D to 3D while technology and design developed together. From 1985 to 1992, Korean broadcasting can be seen as a transitional period in which the image changes due to the emphasis on information power while utilizing digital technology.

• Journal of Space Technology and Applications
• /
• v.4 no.1
• /
• pp.74-85
• /
• 2024

As the limitations of conventional radio communications between satellites and the ground become apparent, various experiments are being conducted around the world to overcome them with space laser communication. In this study, we address the development of our own optical communications terminal (OCT) and optical ground station (OGS) and the experiments of free-space optical communication (FSOC) using them. Using a 30 mm-diameter OCT and a 250 mm-diameter portable OGS telescope, as well as commercial 10 Gbps SFP+ modules and media converters, we successfully transmitted and received 4K high-definition multimedia interface (HDMI) signals through 1,550 nm optical laser beam. The transmission and reception distances of the experiment were 3, 9, and 20 km, respectively, and the received signal strength at each distance was +6.1, -2.8, and -10.9 dBm, respectively. It was demonstrated that the 4K HDMI video lasted for over 10 minutes.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.2
• /
• pp.222-230
• /
• 2000

Purpose : Resection of the epileptogenic zone in the parietal and occipital lobes may be relevant although only few studies have been reported. Methods : Eight patients with parietal epilepsy and nine patients with occipital epilepsy were included for this study. Preoperatively, all had video-EEG monitoring with extracranial electrodes, MRI, 3D-surface rendering of MRI using Allegro(ISG Technologies Inc., Toronto, Canada), and PET scans. Sixteen patients underwent invasive recording with subdural grid. Eight had parietal resection including the sensory cortex in two. Seven had partial occipital resection. Two underwent total unilateral occipital lobectomy. The extent of the resection was made based mainly on the data of invasive EEG recordings, MRI, and 3D-surface rendering of MRI, not on the intraoperative electrocorticographic findings as usually done. During resection, electrocortical stimulation was performed on the motor cortex and speech area. Results : Out of eight patients with parietal epilepsy, three had sensory aura, two had gustatory aura, and two had visual aura. Six of nine patients with occipital epilepsy had visual auras. All had complex partial seizures with lateralizing signs in 15 patients. Four had quadrantopsia. One had mild right hemiparesis. Abnormality in MRI was noticed in six out of eight parietal epilepsy and in eight out of nine occipital epilepsy. 3D-surface rendering of MRI visualized volumetric abnormality with geometric spatial relationships adjacent to the normal brain, in all of parietal and occipital epilepsy. Surface EEG recording was not reliable in localizing the epileptogenic zone in any patient. The subdural grid electrodes can be implanted on the core of the structural abnormality in 3D-reconstructed brain. Ictal onset zone was localized accurately by subdural grid EEGs in 16 patients. Motor cortex in nine and sensory speech area in two were identified by electrocortical stimulation. Histopathologic findings revealed cortical dysplasia in 10 patients ; tuberous sclerosis was combined in two, hamartoma and ganglioglioma in one each, and subpial gliosis in six. Eleven patients were seizure free at follow-up of 6 months to 37 months(mean 19.7 months) after surgery. Seizures recurred in two and were unchanged in one. Six produced transient sensory loss and one developed hemiparesis and tactile agnosia. One revealed transient apraxia. Two patients with preoperative quadrantopsia developed homonymous hemianopsia. Conclusion : This study suggests that surgical treatment was relevant in parietal and occipital epilepsies with good surgical outcome, without significant neurologic sequelae. Neuroimaging studies including conventional MRI, 3Dsurface rendering of MRI were necessary in identifying the epileptogenic zone. In particular, 3D-surface rendering of MRI was very helpful in presuming the epileptogenic zone in patients with unidentifiable lesion in the conventional MRI, in planning surgical approach to lesions, and also in making a decision of the extent of the epileptogenic zone in patients with identifiable lesion in conventional MRI. Invasive EEG recording with the subdural grid electrodes helped to confirm a core of the epileptogenic zone which was revealed in 3D-surface rendered brain.