• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.415-420
• /
• 1998

In this paper, 2D SUB-3D STM approach for analysis and design of 3D structural concrete is presented. In the approach several 2D sub strut-tie models which are representations of compressive and tensile stress flows of each projected plane of 3D structural concrete are utilized in the sketch of a 3D strut-tie model, in the evaluation of effective strengths of compressive concrete struts, and in the verification of geometric compatibility and bearing capacity of critical nodal zones of 3D strut-tie model. To prove the validity and rationality of the suggested approach, the behavior and strength of a prestressed box girder diaphragm tested to failure are evaluated.

• 대한산업공학회지
• /
• 제20권3호
• /
• pp.35-53
• /
• 1994

Orthographic views ore traditionally used for engineering drawings. This paper presents a methodology for 3D parametric design using orthographic views. The parametric design technique, which is used to design 2D orthographic views, is based on production rules. In the production rule-base, several view interrelation rules and over 50 geometric rules are included. An efficient algorithm is also developed to expedite the reasoning process. For 3D object construction from orthographic views, the approach known as bottom-up geometrical approach is used. The approach consists of 4 steps : 1) generation of wire-frame, 2) construction of face from wire frame, 3) formation of 3D subobjects from faces, and 4) construction of final 3D objects. Curvilinear solids as well as planar solids can be constructed. A method of converting existing 2D CAD data to parametric 3D CAD data is also presented.

• 전자공학회논문지
• /
• 제50권5호
• /
• pp.121-127
• /
• 2013

작은 입력신호의 spectral-amplitude-code(SAC) optical code-division multiple-access (OCDMA) 시스템에는 nonideal symmetric balance incomplete block design(BIBD) code의 사용이 효율적이나 충분한 사용자를 수용하지 못하는 단점이 있다. 이를 극복하기 위하여 본 논문에서는 ideal BIBD code를 공간 코드로 사용하고 nonideal code를 파장 코드로 사용하는 two-dimensional(2-D) BIBD code를 제안한다. 사용자 수에 따른 bit error-rate(BER) 분석을 통하여 제안하는 2-D BIBD code가 1-D BIBD code에 비하여 최대사용자 수를 현저하게 증가시킬 수 있음을 알 수 있다.

• Journal of information and communication convergence engineering
• /
• 제12권3호
• /
• pp.186-192
• /
• 2014

Monolithic three-dimensional integrated chips (3D ICs) are an emerging technology that offers an integration density that is some orders of magnitude higher than the conventional through-silicon-via (TSV)-based 3D ICs. This is due to a sequential integration process that enables extremely small monolithic inter-tier vias (MIVs). For a monolithic 3D memory, we first explore the static random-access memory (SRAM) design. Next, for digital logic, we explore several design styles. The first is transistor-level, which is a design style unique to monolithic 3D ICs that are enabled by the ultra-high-density of MIVs. We also explore gate-level and block-level design styles, which are available for TSV-based 3D ICs. For each of these design styles, we present techniques to obtain the graphic database system (GDS) layouts, and perform a signoff-quality performance and power analysis. We also discuss various challenges facing monolithic 3D ICs, such as achieving 50% footprint reduction over two-dimensional (2D) ICs, routing congestion, power delivery network design, and thermal issues. Finally, we present design techniques to overcome these challenges.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권5호
• /
• pp.129-138
• /
• 2006

철근 선조립형 복합 데크플레이트는 거푸집 작업을 없앨 수 있기 때문에 건설현장에서의 발전을 가져왔다. 복합데크 시스템의 해석에는 2D해석법과 3D해석법이 있다. 지금까지 2D해석법을 사용하였으나, 선경축소에 따른 비렌딜 거동을 보다 정확히 표현할 수 있는 3D 해석법의 사용이 요구되어진다. 본 연구에서는 하부근의 선경축소, 아연도 강판의 유무, 경간, 슬래브 두께 등을 변수로 8개의 실험체를 제작하여 거동을 파악하였고, 2D해석법 및 3D해석법을 사용하여 결과를 비교 분석하였다. 2D해석법은 D10의 하부근을 사용하는 경우에만 적용하는 것이 타당하고, 비렌딜 거동을 포함한 상세한 거동을 표현하기 위해서는 3D해석법을 사용하는 것이 타당하다.

• Nuclear Engineering and Technology
• /
• 제31권5호
• /
• pp.512-521
• /
• 1999

A feasibility study was performed to design an epithermal neutron beam for BNCT using the neutron of 2.45 MeV on the average produced from $^2H(d,n)^3$He reaction induced by plasma focus in the z-pinch instead of the conventional accelerator-based $^3H(d, n)^4$He neutron generator. Flux and spectrum were analyzed to use these neutrons as the neutron source for BNCT. Neutronic characteristics of several candidate materials in this neutron source were investigated Using MCNP Code, and $^7LiF$ ; 40%Al + 60%$AIF_3$, and Pb Were determined as moderator, filter, and reflector in an epithermal neutron beam design for BNCT, respectively. The skin-skull-brain ellipsoidal phantom, which consists of homogeneous regions of skin-, bone-, or brain-equivalent material, was used in order to assess the dosimetric effect in brain. An epithermal neutron beam design for BNCT was proposed by the repeated work with MCNP runs, and the dosimetric properties (AD, AR, ADDR, and Dose Components) calculated within the phantom showed that the neutron beam designed in this work is effective in tumor therapy. If the neutron source flux is high enough using the z-pinch plasma, BNCT using the neutron source produced from $^2H(d,n)^3$He reaction will be very feasible.

• 한국게임학회 논문지
• /
• 제20권3호
• /
• pp.25-34
• /
• 2020

본 연구는 상호작용이 사용자 경험에 미치는 영향을 평가하기 위한 디자인 설계로서, 제작자 관점에서 Interactive VR 패션쇼 프로토타입을 분석하고 제작한 사례연구이다. VR 패션쇼 디자인 설계에서 네 가지 상호작용 요소로 선정된 카메라 시점, 의상, 이펙트, 그리고 사운드 UI 아이콘을 통한 Interactive VR 패션쇼를 제작하였다. 최종 디자인 설계는 VR 공간 설계에서 속도, 범위, 매핑의 세 가지 적용요소 중심으로 제안하고, Unity3D 엔진에 적용될 데이터의 포맷 변환을 3D 모델, 애니메이션, 2D UI 디자인, 그리고 시뮬레이션 과정에 맞추어 사용자 경험에 영향력을 전달하는 디자인을 설계하였다.

• 한국컴퓨터정보학회논문지
• /
• 제25권12호
• /
• pp.1-15
• /
• 2020

본 논문에서는 토목 분야 설계와 시공 단계에서의 기존의 2D 프로세스들을 향후 BIM 방식의 프로세스들로 전환하기 위한 새로운 방법을 제안한다. 먼저, 생애주기 관점의 토공 및 도로 구조물의 BIM 설계와 시공 단계에서의 수량-공정(4D)-공사비(5D) 연계 활용의 전체 프로세스에 대하여 기존 2D 방식의 성과품과 3D BIM 방식의 성과품들의 실적용 과정을 비교 분석한다. 제안하는 방법은 IFC 국제 공통 표준 파일 정보와 CBS/OBS/WBS 표준 분류 체계 정보를 연계하여 설계 단계의 성과품을 만들고 수량-공정(4D)-공사비(5D) 연계 활용 모듈을 활용하여 시공 단계의 성과품을 만든다. 궁극적으로는 제안하는 방법을 사용하여 토목 분야 BIM 설계와 시공의 단계별 기술들을 상용화하고자 한다.

• 패션비즈니스
• /
• 제15권2호
• /
• pp.131-144
• /
• 2011

The purpose of this study is to propose 3D art make-up design process by reproducing real objects through preliminary digital drawing with Photoshop (Photo Shop CS4.0, Adobe, USA) and using special make-up that has never been done previously, and produce creative problem solving plan to make concrete expanding thoughts and ideas. As for this study method, this study was composed of preliminary study, literature study by book examination and positive study on design process that performed preparatory work and reproduced real objects. Real case study by art make-up design process can improve effective design expressing ability by utilizing special make-up, diversify techniques, extend expression areas by materials, and create unique design. In addition, preliminary work by digital drawing, a process to predict real object work in advance, could reduce time and cost while improving work skill for work production, raise design accuracy and make easy the modification of idea. This study is anticipated to activate digital make-up by various digital techniques including Photoshop.

• 한국전자파학회지:전자파기술
• /
• 제24권2호
• /
• pp.3-14
• /
• 2013

In this paper, key design issues and considerations for Signal Integrity(SI) and Power Integrity(PI) of a TSV-based 3D IC are introduced. For the signal integrity and power integrity of a TSV-based 3-D IC channel, analytical modeling and analysis results of a TSV-based 3-D channel and power delivery network (PDN) are presented. In addition, various design techniques and solutions which are to improve the electrical performance of a 3-D IC are investigated.