• Journal of Advanced Marine Engineering and Technology
• /
• 제38권1호
• /
• pp.64-69
• /
• 2014

본 논문에서는 선박내의 에너지 절감을 위하여 주거구역 전원인 단상 220V 교류전원에 접속이 가능한 계통연계형 단상 인버터시스템을 제작하여 저주파 L-C 필터 정수 및 스위칭 펄스의 데드타임 변화에 따른 전고조파왜곡율(THD)의 변화를 분석하였다.

• 전기의세계
• /
• 제20권4호
• /
• pp.5-11
• /
• 1971

This is a study on the insulation methods of home appliances and wiring devices proper to the new electric distribution system, primary side is 22.9/13.2KV, 3 phase 4 wire multigrounding system and secondary side is 380/220V, 3 phase 4 wire common neutral system. 1800V is determined as the electrical insulation voltage of the functional insulation because the abnormal voltage rise of the neutral line is 1300V. In the case of the functional insulation faults, the following safety methods will be suggested to protect the accidental faults: (a) class I appliance (accessible metal part is earthed), (b) class II appliance (doublly insulated), (c) class III appliance (operates at low voltage source). The mechanisms of the wiring devices are not improved to guarantee for the harmful electric shock but also the electrical insulation voltage is rised to 2000V.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1612-1613
• /
• 2011

초고압 XLPE 케이블용 접속재는 고도의 신뢰성과 안정성이 요구되며, 국내외적으로 제품 경량화, 시공 공정 단순화 등 고객의 다양한 요구가 점차 증가하는 추세이다. 당사는 220kV 1C${\times}$2000SQ XLPE 케이블 접속재인 EB-G(가스중 종단접속함)를 Slip-on Type으로 적용함으로써 고객의 요구에 맞춰 단순한 내부절연구조에서 비롯되는 전기적 특성의 안정성과 신속한 시공성을 확보하게 되었다. 본고에서는 220kV급 접속재인 가스중종단접속함(EB-G)의 설계, 개발시험에 관하여 소개하고자 한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.428-431
• /
• 2009

안정적인 전력계통 운영을 위한 공급전압별 유지기준의 설정은 대단히 중요하다. 유지기준은 현재 정부고시로 제정 운영되고 있다. 우리나라의 공급전압은 345kV-154kV-22.9kV 및 380V-220V-110V로 구성되어 있다. 본 논문에서는 전기품질 유지관리에 영향을 주는 계통전압 중, 154kV를 중심으로 수요분석을 통해 유지기준이 적정한지를 살펴보고 이를 토대로 현재의 전력계통 수요에 적합한 유지기준을 고찰해 보고자 한다.

• 전력전자학회논문지
• /
• 제26권5호
• /
• pp.372-375
• /
• 2021

A three-leg inverter-type isolated DC-DC Converter that can use 220 and 440 V grid input voltages is introduced. The secondary circuit structure of the proposed topology is center-tap, which is the same as the conventional phase-shifted full-bridge converter. However, the primary circuit structure is composed of a three-leg inverter structure and a transformer, in which two primary windings are connected in series. The proposed circuit structure has a wider input voltage range than the conventional phase-shifted full-bridge converter, and the circulating-current on the primary-side is reduced. In addition, the voltage stress at the secondary rectifier is greatly improved, and high efficiency can be achieved at a high input voltage by removing the snubber circuit added to the conventional converter. Prototype converters with input DC of 311 V, output of 622 V, and 50 V and 6 kW class specifications were designed and manufactured to verify the validity of the proposed topology; the experimental results are presented.

• Journal of information and communication convergence engineering
• /
• 제19권4호
• /
• pp.214-220
• /
• 2021

In this study, we constructed several scenarios that are required for LED lighting, and we designed and implemented an LED lighting control system to operate these scenarios to confirm their behavior. An LED lighting control system is a hybrid control board that is designed by combining LED controllers and SMPS, consisting of an AC/DC power supply part that converts AC 220 V into DC 12 V, and a drive and control part that controls the scenario and color of the LED module. Conventional LED light controllers have an input power of DC 12 V, so when using the input AC 220 V, the SMPS must be connected to the LED light controller. To eliminate this inconvenience, a hybrid LED lighting control system was configured to combine LED lighting controllers and SMPS into one control system. Furthermore, we designed a control system to represent the most appropriate color according to the input of the distance and illumination using a fuzzy control system to conduct computer simulations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.93-93
• /
• 2010

We developed friction welded bimetallic sleeve for 220kV aluminum conductor XLPE cable. Not only friction welded bimetallic sleeve for Termination(EB-A, EB-G) but also friction welded sleeve for Joint of Al to Cu conductor was developed regardless of this project. Generally, friction welded sleeve used to connect Al conductor cable to Cu conductor cable and used for improvement of mechanical property of terminal by offer the copper side of friction welded bimetallic sleeve at the Termination. Connection method for Al-Cu conductor has mainly used friction welding at the solid state, because it is difficult to connect by using conventional welding method. this investigation introduces development of friction welded bimetallic sleeve by friction welding and test result of 220kV Al conductor XLPE cable and accessories using friction welded sleeve.

• 제품안전
• /
• 통권3호
• /
• pp.58-59
• /
• 1992

• 전기저널
• /
• 4호통권160호
• /
• pp.28-33
• /
• 1990

• 전기저널
• /
• 8호통권104호
• /
• pp.18-21
• /
• 1985