• 대한금속재료학회지
• /
• 제49권4호
• /
• pp.329-333
• /
• 2011

To develop wide-band noise absorbers with a special design for low-frequency performance, this study proposes a tin oxide (Sn-O) thin films as the noise absorbing materials in a microstrip line. Sn-O thin films were deposited on polyimide film substrates by reactive sputtering of the Sn target under flowing $O_{2}$ gas, exhibiting a wide variation of surface resistance (in the range of $10^{0}-10^{5}{\Omega}$) depending on the oxygen partial pressure during deposition. The microstrip line with characteristic impedance of $50\Omega$ was used for the measurement of noise absorption by the Sn-O films. The reflection parameter $(S_{11})$ increased with a decrease of surface resistance due to an impedance mismatch at the boundary between the film and the microstrip line. Meanwhile, the transmission parameter $(S_{21})$ diminished with a decrease of surface resistance resulting from an Ohmic loss of the Sn-O films. The maximum noise absorption predicted at an optimum surface resistance of the Sn-O films was about $150{\Omega}$. For this film, greater power absorption is predicted in the lower frequency region (about 70% at 1 GHz) than in conventional magnetic sheets of high magnetic loss, indicating that Ohmic loss is the predominant loss parameter for the conduction noise absorption in the low frequency band.

• 한국전기전자재료학회논문지
• /
• 제30권6호
• /
• pp.356-360
• /
• 2017

We investigated the phase evolution, microstructure, and microwave dielectric properties of Na- and Zr-doped $Ba(Mg_{0.5}W_{0.5})O_3$ [i.e., ($Ba_{1-2x}Na_{2x})(Mg_{0.5-x}Zr_xW_{0.5})O_3$] ceramics. $BaWO_4$ as a secondary phase was observed in all compositions, and it increased as the dopant concentration increased. All specimens revealed a dense microstructure. For the composition of x=0.01, polyhedral grains were observed. As the dopant concentration increased, the densification and the grain growth were promoted by a liquid phase. The quality factor($Q{\times}f_0$) decreased remarkably, whereas the dielectric constant (${\varepsilon}_r$) tended to decrease as the dopant concentration increased. The dielectric constant, quality factor, and temperature coefficient of the resonant frequency of the composition of x=0.01 sintered at $1,700^{\circ}C$ for 1 h were 18.6, 216,275 GHz, and $-22.0ppm/^{\circ}C$, respectively.

• 디지털산업정보학회논문지
• /
• 제13권4호
• /
• pp.141-151
• /
• 2017

Nowadays, It is undeniable that the threat of network security is growing as time flows due to worldwide development of wire/wireless, various Internet platform and sophisticated hacking techniques. The amount of traffics that Network security solution has to handle is increasing and recently many occurrence of explosive traffic attacks from PulseWave are being observed which has many similar characteristics to New DDos. Medium and small sized firms abroad have developed and distributed Snort and Suricata that are based on open-source Intrusion Detection System(IDS) / Intrusion Prevention System (IPS). The goal of this study is to compare between Windows7 by applying suicata 4.0.0 32bit version and Ubuntu 16.04.3 LTS by applying suicata 4.0.0 version which is an open source Intrusion Detection System / Intrusion Protection System that uses multi threads method. This experiment's environment was set as followed C1100 server model of Dell, Intel Xeon CPU L5520 2.27GHz*2 with 8 cores and 16 threads, 72GB of RAM, Samsung SSD 250GB*4 of HDD which was set on RAID0. According to the result, Suricata in Ubuntu is superior to Suricata in Windows7 in performance and this result indicates that Ubuntu's performance is far advanced than Windows7. This meaningful result is derived because Ubuntu that applied Suricata used multi core CPU and RAM more effectively.

• 한국세라믹학회지
• /
• 제36권4호
• /
• pp.343-353
• /
• 1999

2.45 GHz의 microwave가 수열 합성법으로 제조된 BaTiO3 분말의 특성에 미치는 영향을 조사하였다. 700W 출력으로 반응시켰을 때, microwave-autoclave system에서는 약 5분만에 BaTiO3 결정이 형성되기 시작하여, 10분 이상의 반응에서는 더 이상 결정성 증가는 관찰되지 않았다. Microwave-system의 경우에는 15분만에 결정이 형성되기 시작하여, 1시간정도의 반응으로 충분한 BaTiO3 분말을 얻을 수 있었다. Microwave를 이용한 균일가열의 영향으로 분말들은 균일하게 분산되어 있었고, 기존의 전기적인 가열 방법에서 나타나는 응집 현상이나 grain의 성장 등은 보이지 않았다. 제조된 분말의 크기는 보통 30~60 nm정도였는데, 졸 안의 Ba/Ti의 비가 분말의 크기를 결정하는데 중요한 역할을 하였다. 이는 여분의 바륨이 Ba(OH)2등과 같은 다른 상을 형성하여 BaTiO3 분말의 계면에 얇은 막을 형성하여 분말들의 응집 현상이나 grain의 성장을 억제하는 것으로 추정하였다. M1-crowave-autoclave 에서는 15분 정도의 반응만으로도 미량이지만 tetragonal-BaTiO3를 직접적으로 형성할 수 있었고, microwave-reflux에서는 25$0^{\circ}C$의 건조로써 미량의 tetragonal-BaTiO3를 얻을 수 있었다.

• 천문학회지
• /
• 제48권6호
• /
• pp.365-380
• /
• 2015

We map 6 massive young stellar objects (YSOs) in the CO J=2-1 line and survey 18 massive YSOs, including the six, in the HCO⁺ J=1−0, SiO J=2−1, H₂O 6₁₆ − 5₂₃ maser, and CH₃OH 7₀ − 6₁ A⁺ maser lines. We detect CO bipolar outflows in all the six mapped sources. Four of them are newly discovered (07299−1651, 21306+5540, 22308+5812, 23133+6050), while 05490+2658 is mapped in the CO J=2-1 line for the first time. The detected outflows are much more massive and energetic than outflows from low-mass YSOs with masses >20 M_⊙ and momenta >300 M_⊙ km s⁻¹. They have mass outflow rates (3−6)×10⁻⁴ M_⊙ yr⁻¹, which are at least one order of magnitude greater than those observed in low-mass YSOs. We detect HCO⁺ and SiO line emission in 18 (100%) and 4 (22%) sources, respectively. The HCO⁺ spectra show high-velocity wings in 11 (61%) sources. We detect H₂O maser emission in 13 (72%) sources and 44 GHz CH₃OH maser emission in 8 (44%) sources. Of the detected sources, 5 H₂O and 6 CH₃OH maser sources are new discoveries. 20081+3122 shows high-velocity (>30 km s⁻¹) H₂O maser lines. We find good correlations of the bolometric luminosity of the central (proto)star with the mechanical force, mechanical luminosity, and mass outflow rate of molecular outflow in the bolometric luminosity range of 10⁻¹−10⁶ L_⊙, and identified 3 intermediate- or high-mass counterparts of Class O objects.

• 한국분말재료학회지
• /
• 제17권4호
• /
• pp.289-294
• /
• 2010

For the aim of low-temperature co-fired ceramic microwave components, sintering behavior and microwave properties (dielectric constant ${\varepsilon}_r$, quality factor Q, and temperature coefficient of resonant frequency ${\tau}_f$) are investigated in $Bi_{18}O(Ca_{0.725}Zn_{0.275})_8Nb_{12}O_{65}$ [BCZN] ceramics with addition of $V_2O_5$. The specimens are prepared by conventional ceramic processing technique. As the main result, it is demonstrated that the additives ($V_2O_5$) show the effect of lowering of sintering temperature and improvement of microwave properties at the optimum additive content. The addition of 0.25 wt% $V_2O_5$ lowers the sintering temperature to $890^{\circ}C$ utilizing liquidphase sintering and show the microwave dielectric properties (dielectric constant ${\varepsilon}_r$ = 75, quality factor $Q{\times}f$ = 572 GHz, temperature coefficient of resonance frequency ${\tau}_f\;=\;-10\;ppm/^{\circ}C$). The estimated microwave dielectric properties with $V_2O_5$ addition (increase of ${\varepsilon}_r$, decrease of $Q{\times}f$, shift of ${\tau}_f$ to negative values) can be explained by the observed microstrucure (sintered density, abnormal grain structure) and possibly high-permittivity $Bi_{18}Zn_8Nb_{12}O_{65}$ (BZN) phase determined by X-ray diffraction.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2001년도 춘계학술대회논문집:21세기 신지식정보의 창출
• /
• pp.224-231
• /
• 2001

2.45 GHz 마이크로웨이브를 사용하는 전자회전공명 플라즈마를 이용하여 화학적 기상증착(electron cyclotron resonance plasma enhanced chemical vapor deposition; ECR-PECVD) 방법으로 ECR 마이크로웨이브 power, CH$_4$/H$_2$가스 혼합비와 유량, 증착시간, 그리고 기판 bias 전압 등을 변화시켜 가면서 수소가 함유된 비정질 탄소(a-C:H) 박막을 증착하였고, 증착시킨 박막의 특성을 AES(Auger electron spectroscopy), ERDA(elastic recoil detection analysis), FTIR(Fourier transform infrared) 및 Raman 측정 등으로 조사하였다. 증착시킨 a-C:H 박막은 탄소 및 수소원소들로만 구성되어 있음을 AES 측정으로 확인하였다. 그리고 FTIR 측정으로부터 a-C:H 박막은 대부분 sp$^3$결합을 하고 있고 일부는 sp$^2$결합을 하고 있음을 확인하였으며, CH$_4$/H$_2$가스 혼합비와 유량의 변화가 a-C:H 박막의 탄소와 수소의 결합구조에 큰 영향을 미치지 않았으며, 다만 증착시간이 증가할수록 탄소와 수소 원자들의 결합구조가 $CH_3$구조에서 CH$_2$나 CH 구조로 변하고 있음을 알았다. 또한 Raman 스펙트럼의 Gaussian curve fitting을 통하여 sp$^3$/sp$^2$의 결합수에 비례하는 D 및 G peak의 면적 강도비(I$_{D}$/l$_{G}$)는 기판 bias 전압을 증가시킬수록 증가하였으며, 경도도 역시 증가하였다.하였다.

• 한국전기전자재료학회논문지
• /
• 제31권4호
• /
• pp.212-215
• /
• 2018

The phase evolution, microstructure, and microwave dielectric properties of $Ba(Mg_{0.5-2x}Y_{2x}W_{0.5-x}Ti_x)O_3$ (x = 0.005~0.05) ceramics sintered at $1,700^{\circ}C$ for 1h were investigated. All compositions exhibited a 1:1 ordered cubic perovskite structure. The field emission scanning electron microscopy image revealed a dense microstructure in all the compositions. As the value of x increased, the lattice parameter, dielectric constant, and quality factor increased. The temperature coefficient of resonant frequency changed from $-19.6ppm/^{\circ}C$ to $-5.9ppm/^{\circ}C$ with increasing x value. The dielectric constant, quality factor, and temperature coefficient of resonant frequency of $Ba(Mg_{0.40}Y_{0.10}W_{0.45}Ti_{0.05})O_3$ were 21.7, 132,685 GHz, and $-5.9ppm/^{\circ}C$, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.1-4
• /
• 1994

In this study. the microwave dielectric properties, such at dielectric constant(${\varepsilon}_{\gamma}$), unloaded quality factor multiplied with resonant frequency($Q_{u}$.f), and temperature coefficient of resonant frequency(${\tau}_{f}$), were investigated for the low-temperature sintered (Pb, Ca)$ZrO_3$ with $V_2O_{5}$ additives as well as structural properties. As a result, (Pb,Ca)ZrO$_3$ with 0.2 wt% $V_2O_{5}$ additive, sintered at $1200^{\circ}C$, showed good properties like ${\varepsilon}_{\gamma}$ 109, $Q_{u}$.f 2736 GHz, and ${\tau}_{f}$ -2.94 ppm/$^{\circ}C$. Especially ${\tau}_{f}$ was much better than ($Pb_{0.63}Ca_{0.37}$)$ZrO_3$ of which ${\tau}_{f}$ was known to be + 13.4 ppm/$^{\circ}C$, so it seems to be applicated in micorowave device components.

• 농업과학연구
• /
• 제38권4호
• /
• pp.747-752
• /
• 2011

Wireless technology has enabled farmers monitor and control protected production environment more efficiently. Utilization of USN (Ubiquitous Sensor Network) devices also brought benefits due to reduced wiring and central data handling requirements. However, wireless communication loses signal under unfavorable conditions (e.g., blocked signal path, low signal intensity). In this paper, performance of commercial wireless communication devices were evaluated for application to protected crop production. Two different models of wireless communication devices were tested. Sensors used in the study were weather units installed outside and top of a greenhouse (wind velocity and direction, precipitation, temperature and humidity), inside ambient condition units (temperature, humidity, $CO_2$, and light intensity), and irrigation status units (irrigation flow and pressure, and soil water content). Performance of wireless communication was evaluated with and without crop. For a 2.4 GHz device, communication distance was decreased by about 10% when crops were present between the transmitting and receiving antennas installed on the ground, and the best performance was obtained when the antennas were installed 2 m above the crop canopy. When tested in a greenhouse, center of a greenhouse was chosen as the location of receiving antenna. The results would provide information useful for implementation of wireless environment monitoring system for protected crop production using USN devices.