• Restorative Dentistry and Endodontics
• /
• 제35권2호
• /
• pp.88-95
• /
• 2010

이 연구의 목적은 4가지 엔진구동형 NiTi 기구의 근관성형력을 비교하는 것이다. 32개의 투명레진모형을 사용하여 파일의 단면도가 S자 형태이고 "single length"방법으로 근관성형을 시행하는 Mtwo와 crown-down 방법으로 근관성형을 하는 Profile, ProTaper Universal 및 K3로 근관성형을 하였다 (n = 8). 모든 근관은 한사람의 술자가 근단공 크기가 #30이 될 때까지 성형하였다. 기구 사용 전과 후 근관 모양을 디지털 영상을 기록하였고, 컴퓨터 영상 분석 프로그램(Expression Scanner와 Adobe Photoshop CS)으로 평가하였다. 다음과 같은 결론을 얻었다. 근첨으로부터 1, 2, 3, 4, 5, 6, 7 mm 떨어진 부위의 내측과 외측으로 삭제된 레진 양을 측정하였고, 자료는 SPSS법으로 비교 분석하였다. 1. 근관형성 시간은 Mtwo가 84.50초로 가장 짧았으며, 총 작업시간은 K3가 269.37초로 가장 길었다(p < 0.05). 2. 기구의 변형과 파절은 모든 구동형 NiTi 파일에서 발생하지 않았다. 3. 근관 내측 폭경의 변화는 Profile이 1, 2 mm 부위를 제외한 다른 부위에서 가장 적었으며, ProTaper Universal은 모든 부위에서 가장 많았다(p < 0.05). 4. 근관 외측 폭경의 변화는 Mtwo이 1 mm 부위를 제외한 모든 부위에서 가장 적었으며, Profile은 3, 4 mm 부위에서 가장 많았다(p < 0.05). ProTaper Universal와 K3는 1, 2, 6, 7 mm 부위에서 가장 많았다(p < 0.05). 5. 근관중심변위율(centering ratio)은 Profile이 1, 4, 5, 6 mm 부위에서 가장 적었다(p < 0.05). 이상의 결과, 구동성 NiTi 파일을 이용한 만곡 근관의 근관형성은 치경부는 ProTaper와 같은 삭제력이 높은 파일을 사용하는 것이 근관 입구를 효과적으로 넓히고 더 나은 taper를 형성하며, 근단부는 Profile과 같은 근관 중심 변위가 적은 파일을 사용하는 것이 근관형성 시간을 단축하고 근단부의 근관 변형(transportation)을 줄일 수 있다고 판단된다.

• 대한한의학원전학회지
• /
• 제30권2호
• /
• pp.1-10
• /
• 2017

Objectives : In studying East Asia's medical classics, what must first be done before evaluating the validities of clinical grounds is the discernment of the techniques that are based on universal principles from the statements that arise from individual experience. The purpose of this paper is to discover a method of discerning the statements of individual experiences and the descriptions of universal principles. Ingredients and Methods : The paper investigates how each individual clinical experience was introduced in ancient medical classics such as Huangdineijing, Nanjing, Shanghanlun, Jinkuiyaolue, and Maijing, in the books that belong to Yian such as Canggongliechuan, Linzhengzhinanyian, Gujinyianan, and Xumingyileian, and in Korean ancient medical texts such as Eonhae-gugeubbang and Gugeubganibang-eonhae. Results : Books of precriptions and scriptures of medicine were found to include individual experiences. Furthermore, this paper's effort has revealed that the evaluation of the quality of a testimony in an ancient book must be preceded by discerning whether the said testimony is a mere personal testimony or a testimony based on the universal law of causality. Conclusions : Before conducting a clinical research of a precription contained in an East Asian medical classic, the text should first be evaluated to determine whether the prescription in question derives from clinical tests or not.

• 한국균학회지
• /
• 제40권2호
• /
• pp.78-85
• /
• 2012

20 mer의 URP primers 가 한국 재래적미의 반복배열 DNA 염기서열로부터 고안되어 다양한 곰팡이 종의 PCR 다형성검출에 적용 되어 왔다. URP-PCR 방법은 PCR반응중 $55^{\circ}C$이상의 고온에서 annealing반응을 함으로 하여 재생적인 PCR결과를 얻을 수 있으며 효모균류에서 담자균류의 고등 균류까지 33속, 142 종, 1,489 균주의 다양한 곰팡이 종의 유전체 DNA에 적용되어 그 유용성이 평가 되어 왔다. 본 논문은 URP-PCR의 특성과 지금까지 다양한 곰팡이 종 다양성 검정결과를 종합하여 보고 한다.

• 전력전자학회논문지
• /
• 제21권2호
• /
• pp.102-110
• /
• 2016

In this paper, a high-frequency dual mode control LLC resonant converter with wide input voltage range is proposed through zero voltage switching (ZVS) under the universal line input voltage and every load conditions. Conventional small power adapter driving should be satisfied with universal line input voltage because it has no power factor correction circuit regulation. The conventional LLC resonant converter for an adapter can reduce the size of transformer in terms of high-frequency driving and ZVS. However, this converter has a disadvantage in terms of design of resonant tank under various input voltages because the frequency modulation range is very wide to satisfy voltage conversion gain. Compared with the conventional one, the proposed LLC converter can be adapted to universal line input voltage and high-frequency driving because it is controlled by pulse width modulation and pulse frequency modulation with control voltage. The validity of the proposed LLC converter is proved through the 60 W prototype.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.309-318
• /
• 2015

This study proposes a dual-output single-stage bridgeless single-ended primary-inductor converter (DOSSBS) that can completely remove the front-end full-bridge alternating current-direct current rectifier to accomplish power factor correction for universal line input. Without the need for bridge diodes, the proposed converter has the advantages of low component count and simple structure, and can thus significantly reduce power loss. DOSSBS has two uncommon output ports to provide different voltage levels to loads, instead of using two separate power factor correctors or multi-stage configurations in a single stage. Therefore, this proposed converter is cost-effective and compact. A magnetically coupled inductor is introduced in DOSSBS to replace two separate inductors to decrease volume and cost. Energy stored in the leakage inductance of the coupled inductor can be completely recycled. In each line cycle, the two active switches in DOSSBS are operated in either high-frequency pulse-width modulation pattern or low-frequency rectifying mode for switching loss reduction. A prototype for dealing with an $85-265V_{rms}$ universal line is designed, analyzed, and built. Practical measurements demonstrate the feasibility and functionality of the proposed converter.

• 보건의료산업학회지
• /
• 제12권2호
• /
• pp.89-99
• /
• 2018

Objectives : To compare the degree of achievement of Universal Health Coverage (UHC) among 39 developing countries in Africa and to investigate the correlation between health care financing and the UHC index. Methods : For data, 14 UHC indexes were used in 2015 supplied by the World Health Organization (WHO). In addition, this study used a 10% of threshold point corresponding to the catastrophic health expenditures and a 25% of threshold points as a health care financing index. Results : It was found that there were significant difference among Least Low Developed Countries (LLDCs), Other Low Income Countries (Other LICs), Lower Middle Income Countiies (LMICs), Upper Middle Income Countires (UMICs) to compare the average value by nation on the UHC index. This study showed that the UHC index of LLDCs was lowest, but the average value was higher as it moved towards LMICs and UMICs. In addition, it was found that there was an average value difference among the groups like LLDCs, Other LICs, LMICs and UMICs. As a result of comparison, it was found that the spending of household health expenditure increased as LLDCs moved towards UMICs when the burden of household health expenditure was 25%. Conclusions : This study aimed to compare the UHC indexes of African nations and to investigate the correlation between the degree of spending of total expenditure on health and burden of household health expenditure and UHC, and its effect.

• 디지털산업정보학회논문지
• /
• 제16권4호
• /
• pp.43-53
• /
• 2020

There are three standards for FIDO1 authentication technology: Universal Second Factor (U2F), Universal Authentication Framework (UAF), and Client to Authenticator Protocols (CTAP). FIDO2 refers to the WebAuthn standard established by W3C for the creation and use of a certificate in a web application that complements the existing CTAP. In Korea, the FIDO certified market is dominated by UAF, which deals with standards for smartphone (Android, iOS) apps owned by the majority of the people. As the market requires certification through FIDO on PCs, FIDO Alliance and W3C established standards that can be certified on the platform-independent Web and published 『Web Authentication: An API for Accessing Public Key Credentials Level 1』 on March 4, 2019. Most PC do not contain biometrics, so they are not being utilized contrary to expectations. In this paper, we intend to present a model that allows login in PC environment through biometric recognition of smartphone and FIDO UAF authentication. We propose a model in which a user requests login from a PC and performs FIDO authentication on a smartphone, and authentication is completed on the PC without any other user's additional gesture.

• International Journal of Advanced Culture Technology
• /
• 제10권2호
• /
• pp.28-33
• /
• 2022

This study aims to investigate factors that affect elderly poverty based on a comprehensive and universal perspective, suggesting some alternatives for improving the poverty rate of the elderly. The comprehensive and universal approach to the poverty of the aged that this study attempts can give a better understanding of the elderly poverty beyond the contribution of the existing literature, with the research model including individual, family, labor, and income factors as the causes of old-age poverty from the comprehensive and universal perspective on the causes of poverty of the elderly. In addition, the study attempts to input variants of variables into the equation for the causes of elderly poverty by using panel data from the 8th Korean Retirement and Income Study. This study employs decision tree analysis to determine the cause of the poverty of the elderly using CHAID. The decision tree analysis shows that the most vital variable affecting elderly poverty is making income. For the poor elderly without earned income, public pensions, educational careers, and residential areas influence elderly poverty, but for the poor elderly with earned income, wage earners and gender are variables that affect poverty. This study suggests some alternatives to improve the poverty rate of the aged. The government should create a better working environment such as senior re-employment for old people to be able to participate in economic activities, improve public pension or social security for workers with unfavorable conditions for public security of old age, and give companies that create employment of the aged diverse incentives.

• 한국산업융합학회 논문집
• /
• 제26권6_1호
• /
• pp.993-999
• /
• 2023

In this paper, a novel polishing tool mechanism with 3-axis compliance is presented, which consists of 2-axis rotational and 1-axis linear compliances in series. The 2-axis rotational compliance mechanism is made up of four cantilever beams for adjusting rotational stiffness and one flexure universal joint at the center for constraining the z-axis deflection. The 2-axis rotational compliance can mechanically adjust the polishing tool to machined surfaces. The polishing press force can be simply controlled by using a linear spring along the z-axis. The 2-axis rotational and 1-axis linear compliance design is decoupled. The stiffness analysis of the 2-axis compliance mechanism was performed based on link compliance matrix and rigid body transformation. A 3-axis polishing tool was designed by configuring the 2-axis compliance mechanism and one linear spring.

• 한국통신학회논문지
• /
• 제39C권2호
• /
• pp.191-198
• /
• 2014

NMEA(National Marine Electronic Association) 2000은 선박에서 사용되는 다양한 데이터(위치정보, 엔진 상태 등)들을 다른 전자장비에 통신하기 위한 규격으로, 이 선박 네트워크를 기반으로 한 범용 게이트웨이를 구현하였다. 이를 위해 NMEA 2000 Stack(ssJ1939) source와 CAN device driver source를 다양한 통신프로토콜을 사용할 수 있는 보드에 포팅하고 CAN, RS232, USB, Ethernet port를 갖추고 있는 이 보드에 연결하였다. 개발한 게이트웨이에서 변환된 선박 데이터의 검증을 위해, PC 기반의 시뮬레이터 프로그램과 모니터링 프로그램을 이 보드에 연결하여 NMEA 2000 network를 통해 선박의 데이터를 볼 수 있게끔 구성하였다. PC의 시뮬레이터 프로그램에서 생성된 선박 데이터정보를 게이트웨이와 NMEA 2000 network를 통해 모니터링 프로그램에서 분석하고 게이트웨이의 성능을 검증하였다. 기존의 게이트웨이가 주로 단일의 특정한 통신 프로토콜을 지원하는 것에 대비하여 Wi-Fi, Ethernet, Bluetooth, USB, RS232 등 다양한 통신 프로토콜을 지원함으로써 사용자가 원하는 통신방식을 이용하여 원격에서 데이터를 모니터링 하도록 설계하고 구현하였다.