• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.163-163
• /
• 1999

MOSFET, MESFET 그리고 MODFET는 Logic ULSIs, high speed ICs, RF MMICs 등에서 중요한 역할을 하고 있으며, 그것의 gate electrode, contact, interconnect 등의 물질로는 refractory metal을 이용한 CoSi2, MoSi2, TaSi2, PtSi2, TiSi2 등의 효과를 얻어내고 있다. 그중 TiSi2는 비저항이 가장 낮고, 열적 안정도가 좋으며 SAG process가 가능하므로 simpler alignment process, higher transconductance, lower source resistance 등의 장점을 동시에 만족시키고 있다. 최근 소자차원이 scale down 됨에 따라 TiSi2의 silicidation 과정에서 C49 TiSi2 phase(high resistivity, thermally unstable phase, larger grain size, base centered orthorhombic structure)의 출현과 그것을 제거하기 위한 노력이 큰 issue로 떠오르고 있다. 여러 연구 결과에 따르면 PAI(Pre-amorphization zimplantation), HTS(High Temperature Sputtering) process, Mo(Molybedenum) implasntation 등이 C49를 bypass시키고 C54 TiSi2 phase(lowest resistivity, thermally stable phase, smaller grain size, face centered orthorhombic structure)로의 transformation temperature를 줄일 수 있는 가장 효과적인 방법으로 제안되고 있지만, 아직 그 문제가 완전히 해결되지 않은 상태이며 C54 nucleation에 대한 physical mechanism을 밝히진 못하고 있다. 본 연구에서는 증착 시 기판온도의 변화(400~75$0^{\circ}C$)에 따라 silicon 위에 DC/RF magnetron sputtering 방식으로 Ti/Si film을 각각 제작하였다. 제작된 시료는 N2 분위기에서 30~120초 동안 500~85$0^{\circ}C$의 온도변화에 따라 RTA법으로 각각 one step annealing 하였다. 또한 Al을 cosputtering함으로써 Al impurity의 존재에 따른 영향을 동시에 고려해 보았다. 제작된 시료의 분석을 위해 phase transformation을 XRD로, microstructure를 TEM으로, surface topography는 SEM으로, surface microroughness는 AFM으로 측정하였으며 sheet resistance는 4-point probe로 측정하였다. 분석된 결과를 보면, 고온에서 제작된 박막에서의 C54 phase transformation temperature가 감소하는 것이 관측되었으며, Al impuritydmlwhswork 낮은온도에서의 C54 TiSi2 형성을 돕는다는 것을 알 수 있었다. 본 연구에서는 결론적으로, 고온에서 증착된 박막으로부터 열적으로 안정된 phase의 낮은 resistivity를 갖는 C54 TiSi2 형성을 보다 낮은 온도에서 one-step RTA를 통해 얻을 수 있다는 결과와 Al impurity가 존재함으로써 얻어지는 thermal budget의 효과, 그리고 그로부터 기대할 수 있는 여러 장점들을 보고하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.272.2-272.2
• /
• 2016

Copper-Tin (CuSn) thin films were synthsized by rf magnetron co-sputtering method with pure Cu and Sn metal targets with various rf powers and sputtering times. The obtained CuSn thin films were characterized by a surface profiler (alpha step), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), X-ray induced Auger electron spectroscopy (XAES), and contact angle measurement. The deposition rates were calculated by the thickness of CuSn thin films and sputtering times. We observed hexagonal Cu20Sn6 and cubic Cu39Sn11 phases from the films by XRD measurement. From the survey XPS spectra, the Cu and Sn main peaks were observed. Therefore, we could conclude CuSn thin films were successfully fabricated on the substrate in this study. The changes of oxidation states and chemical environment of the films were investigated with high resolution XPS spectra in the regions of Cu 2p, Cu LMM, and Sn 3d. Surface free energy (SFE) and wettability of the CuSn thin films were studied with distilled water (DW) and ethylene glycol (EG) using the contact angle measurement. The total SFE of CuSn thin films decreased as rf power on Cu target increased. The contribution to the total SFE of dispersive SFE was relatively superior to polar SFE.

• Korean Journal of Materials Research
• /
• v.4 no.4
• /
• pp.459-465
• /
• 1994

A-axis oriened YBCO thin flims were grown on $LaAIO_{3}$ single crystal substrate by off-axis rf magnetron sputtering method. We used two kinds of process to get a-axis oriented fi1ms;one-step process and two-step process. In one-step process, films are grown in single step in which substrate temperature( $T_s$) is in the range of $590^{\circ}C$ to $680^{\circ}C$. On the other hand, in two step process a-axis oriented thin film templates i f about 30nm thickness is deposited at low temperature first, and subsequently films are grown at elevated temperature to the final thickness of about 100nm. In the case of one step process($T_s$ ~)$600^{\circ}C$), prefered a-axis orientation is dominant and Cu-rich phases segregate at the surface. Segregations decrease and ($00 \ell$) peaks increase upon increasing $T_s$. The films prepared by two step method appeared to have strong(h00) peaks as the deposition rate increased. Microstructure shows pin holes resulted from mixed phases of a-axis and c-axis oriented films. In both cases of one step and two step process, as TS decreases, prepared films show stronger a-axis orientation. However electrical properties of the films are depressed with lower $T_c$ and wider $\Delta T$ as $T_s$ decreases.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.3 s.32
• /
• pp.91-97
• /
• 2004

PBT thin films were formed by rf-magnetron sputtering on $Pt/Ti/SiO_2/Si$ substrate. Bulk-PZT target containing $5\%$-excess PbO was used. After PZT thin films had been deposited at room temperature, remaining portion of the thin film was formed by in-situ process. The ferroelectric perovskite phase was formed at $650^{\circ}C$. The leakage current property was improved dramatically by 2-step sputtering, and in the sample containing optimum thickness of room temp.-layer very low leakage current of $2{\times}10^{-7}A/cm^2$ was shown. As a result of the investigation on the leakage current mechanism, the electrical conduction mechanism in all PZT thin films formed by several conditions was confirmed as bulk-limited mechanism.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.425-425
• /
• 2008

The transparent conducting oxides(TCOs) are widely used as electrodes for most flat panel display devices(FPDs), electrodes in solar cells and organic light emitting diodes(OLED). Among them, indium oxide materials are mostly used due to its high electrical conductivity and a high transmittance in the visible spectrum. The present study reports on a study of the electrical and optical properties of IGZO thin films prepared on glass and PET substrates by the combinational magnetron sputtering. We use the targets of IZO and Ga2O3 for the deposition process. In some case the deposition process is coupled with the End-Hall ion-beam treatment onto the substrates before the sputtering. In addition we control the deposition rate to optimize the film quality and to minimize the surface roughness. Then we investigate the effects of the Ar gas pressure and RF power during the sputtering process upon the electrical, optical and morphological properties of thin films. The properties of prepared IGZO thin films have been analyzed by using the XRD, AFM, a-step, 4-point probe, and UV spectrophotometer.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.2
• /
• pp.1-6
• /
• 2000

X-ray lithography mask with SiC membrane and Ta absorber patterns has been fabricated using ECR plasma CVD, d.c. magnetron sputtering, and ECR plasma etching. The stress of stoichiometric SiC film was adjusted by rapid thermal annealing under $N_2$, ambient. Adjusting the working pressure during sputtering process resulted in a near-zero residual stress, reasonable density, and smooth surface morphology of Ta film. Cl-based plasma showed a good etching characteristics of Ta, and two-step etching process was implemented to suppress microloading effect fur sub-quarter $\mu\textrm{m}$ patterning.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.203-204
• /
• 2012

CIGS 단일 타켓을 RF 마그네트론 스퍼터링을 이용하여 파워별(20, 40, 60, 80W)로 Mo/SLG위에 증착하여 열처리를 실시하였다. 1step ($350^{\circ}C$), 1step ($550^{\circ}C$), 2step ($350^{\circ}C$, $550^{\circ}C$) 열처리 실시 후 XRD측정 결과 2step 80W에서 가장 좋은 결정성을 확인할 수 있었다. 또한 FE-SEM을 측정결과, 상대적으로 가장 큰 grain size(200nm)를 확인할 수 있었으며 박막의 표면 조도 또한 증가하는 것을 확인할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.109-109
• /
• 2000

AC형 PDP에서 보호막은 방전시 내구성(내 sputter)이 약한 유전체를 보호함으로써 panel이 장시간동안 안정된 동작을 하게 하며, 방전시 2차 전자를 많이 방출함으로써 방전전압을 낮추는 기능을 갖는다. 또한 패널의 전압특성을 결정하고 수명을 크게 좌우하며 방전전극을 플라즈마 발광에 의한 이온 스퍼터로부터 보호하고 벽전하에 의한 메모리 기능을 가지도록 하는 역할도 하는 것으로 알려져 있다. 일반적으로 보호막의 재료로는 MgO, ZrO, CeO2등이 있으며 특히 MgO는 보호막으로 널리 쓰이고 있다. 일반적으로 MgO의 증착방법의 전자빔 증착, 스퍼터링, 이온 플레이팅법이 있으며 많은 연구자들이 이러한 증착방법에 성장된 박막들을 연구하고 있다. 그러나 Cs을 이용한 MgO의 증착방법은 그리 널리 알려져 있지는 않다. 따라서 본 연구에서는 Ar/O2/Cs을 이용하여 MgO박막을 sputtering 방법으로 증착하였으며 이들의 특성에 관하여 연구하였다. Target으로는 Mg을 사용하였으며 DC sputtering법으로 MgO를 증착하였다. 기판으로는 실리콘과 유리를 이용하였으며 가스로는 Ar과 O2를 이용하고 Cs의 첨가 유무에 따라 증착하였다. 또한 입력 전력, 공정압력, 그리고 O2 가스량에 따라 박막을 증착하였으며 이에 따른 증착속도, 결정성, 조성비를 $\alpha$-step, XRD, 그리고 XPS를 이용하여 측정하였다. CS 참가할 경우 Ar/O2 가스만을 이용하여 증착했을 때보다 증착속도는 증가하였으며 XRD 분석시 (111), (200) 방향으로 우선 성장하는 것을 관찰할 수 있었다.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.2
• /
• pp.75-79
• /
• 2013

A one-step route was developed to fabricate $Cu(In,Ga)Se_2$ (CIGS) thin films by radio frequency (RF) magnetron sputtering from a single quaternary $CuIn_{0.75}Ga_{0.25}Se_2$ target. The effects of the substrate temperatures on the structural and electrical properties of the CIGS layers were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS) and Hall effect measurements. All the deposited films showed a preferential orientation along the (112) direction. The films deposited at $300^{\circ}C$ and $400^{\circ}C$ revealed that chalcopyrite main (112) peak and weak prominent peaks of (220)/(204) and (312)/(116), indicating polycrystalline structures. The element ratio of the deposited film at $300^{\circ}C$ were almost the same as the near-optimum value. The carrier concentration of the films decreased with increasing substrate temperatures.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.9
• /
• pp.739-745
• /
• 1998

The objective of this paper is to provide experimental data of Er(rare- earth)doped $SiO_2$thin film made by sputtering methods. The deposition rate of silica glass by sputtering method was 55$\AA$/min. In EDD measurements, the average Er concentration in the deposited film was 0.77(wt%). After annealing at $900^{\circ}C$, the Cl concentration decreased from 3.79(wt%) to 1.52(wt%). The refractive indices of the core $n_1$, cladding $n_2$ were 1.458, 1.558 respectively at 632.8 nm. The refractive index difference between core and cladding, $\Delta$n was 0.1. The refractive index profile of core and cladding interface shows step profile. In the study, $SiO_2$ glass films of Si wafer were successfully doped with active erbium. Therefore, this experimental data will be applicable for fabrications of Er doped planar integrated optical device.