• 한국잠사곤충학회지
• /
• 제38권2호
• /
• pp.150-153
• /
• 1996

1차 액체배양액과 2차 pellet 배지로 이루어지는 대량배양체계의 다른 곤충병원성 곰팡이인 Beauveria bassiana, Beauveria brongniartii, Metarhizum anisopliae, Verticillium lecanii 등에 대한 효용성을 조사하기 위하여 단균사 및 분생포자의 성장율을 비교하였다. 그 결과, 액체배양액에서 단균사의 성장율은 접종 후 72시간에 그 수가 최초 접종수에 비해 103-104배까지 증가함을 확인할 수 있었으며, pellet 배지에서 분생자의 수는 접종 후 3주 째에 103배까지 증가됨을 확인할 수 있었다. 본 실험의 결과 진균의 대량배양을 위해 선발된 1차 액체배양액과 2차 pellet 배지는 여러 곤충병원성 진균의 성장에 효율적인 체계임을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3298-3302
• /
• 2012

Although offline enrichment of phosphorylated peptides is widely used, enrichment for phosphopeptides using $TiO_2$ is often performed manually, which is labor-intensive and can lead to irreproducible results. To address the problems associated with offline enrichment and to improve the effectiveness of phosphopeptide detection, we developed an automated online enrichment system for phosphopeptide analysis. A standard protein mixture comprising BSA, fetuin, crystalline, ${\alpha}$-casein and ${\beta}$-casein, and ovalbumin was assessed using our new system. Our multidimensional system has four main parts: a sample pump, a 20-mm $TiO_2$-based column, a weak anion-exchange, and a strong cation-exchange (2:1 WAX:SCX) separation column with LC/MS. Phosphorylated peptides were successfully detected using the $TiO_2$-based online system with little interference from nonphosphorylated peptides. Our results confirmed that our online enrichment system is a simple and efficient method for detecting phosphorylated peptides.

• 천문학회보
• /
• 제42권2호
• /
• pp.64.2-64.2
• /
• 2017

The Population III (Pop III) stars are thought to be massive. If massive Pop III stars form binary system and they experience mass transfer via the Roche lobe overflow, this may significantly change the properties of the system. For example, mass transfer in such system may shorten the period of the system, forming short period binary black hole (BBH) system, which is the most promising candidate for recently detected gravitational wave radiation sources. Also, there is an expectation that due to the stripped envelope of donor star by mass transfer, this system can play a significant role in the cosmic reionization by emitting more UV photons. However, this outcome highly depends on the initial properties of the system. We perform grid calculation on Pop III binary models with various initial primary masses (20 ~ 100 solar mass), initial separations, and initial mass ratios (q = 0.5 ~ 0.9). We find that 1) in most cases binary models show no increase in the number of ionizing photons and 2) formation of short period BBH system via mass transfer is highly unlikely.

• 한국언론정보학보
• /
• 제67권
• /
• pp.119-151
• /
• 2014

커뮤니케이션학에서 통약가능한 이론적 대중매체체계론이 부재하다는 점은 비교연구를 비롯한 경험연구에서 난점으로 남아있었다. 본 연구는 하버마스의 2단계 사회론을 수정한 수정된 2단계 사회론을 바탕으로 정적 일반대중매체체계론을, 루만의 경계이론과 들뢰즈 가타리의 배치이론을 종합한 경계배치이론을 바탕으로 동적 일반대중매체체계론을 제안한다. 정적 일반대중매체체계론에서 대중매체체계는 일반화된 언어를 조정매체로 하는 문화체계의 하위사회체계로서 여타 하위사회체계 및 생활세계와 상호침투한다. 동적 일반대중매체체계론에서 대중매체체계는 다른 모든 하위사회체계의 경계로서 하위사회체계의 자기관계적 관찰을 생활세계에 의한 타자관계적 관찰과 접목시킨다. 또 대중매체체계는 체계와 생활세계 간의 상호침투를 매개한다. 특히 대중매체체계에서의 수행은 체계를 생활세계로 탈영토화하고 생활세계를 체계로 재영토화한다. 일반대중매체체계론은 다양한 경험적 대중매체체계론에 통약가능성을 제공해주고 편향되게 연구대상을 설정하지 않도록 도움을 줄 것으로 기대된다.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.191-197
• /
• 2010

In spite of a large amount of previous research, detail study on modified mass in proportional damping system is not well understood. It is common to predict structural dynamic design parameters due to the change of mass, but to predict the amount of modified mass and the location where the mass is being modified are rarely found in previous literature. Such inverse problem required detail analytical study in order to understand structural modification in proportional damping system. This paper predicts the modified mass and the modified mass location in proportional damping system using sensitivity coefficients and iterative method. The sensitivity coefficients are obtained from the change of eigenvectors due to mass modification. This method is applied to a horizontal beam and three degree of freedoms system. To validate the predicted changing mass and its location, the obtained results are compared to the reanalysis result which shows good agreement.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1612-1617
• /
• 2004

This paper aims to introduce a new type of mass transit system at new cities. A new mass transit system has been analysed in terms of three view points. 1) a new mass transit between a new city and surrounding cities. 2) a new mass transit inside a new capital, and 3) a traffic center connecting a new mass transit and other modes. This paper can be utilized as a guide line in doing the master plan for new mass transit at new cities.

• Structural Engineering and Mechanics
• /
• 제28권2호
• /
• pp.167-188
• /
• 2008

This study is concerned with the establishment of the characteristic equation of a combined system consisting of a cantilever beam with a tip mass and an in-span visco-elastic helical spring-mass, considering the mass of the helical spring. After obtaining the "exact" characteristic equation of the combined system, by making use of a boundary value problem formulation, the characteristic equation is established via a transfer matrix method, as well. Further, the characteristic equation of a reduced system is obtained as a special case. Then, the characteristic equations are numerically solved for various combinations of the physical parameters. Further, comparison of the results with the massless spring case and the case in which the spring mass is partially considered, reveals the fact that neglecting or considering the mass of the spring partially can cause considerable errors for some combinations of the physical parameters of the system.

• 융복합기술연구소 논문집
• /
• 제6권2호
• /
• pp.15-20
• /
• 2016

This paper presents the effects of a virtual mass on the stability boundary of a virtual spring in the haptic system. A haptic system consists of a haptic device, a sampler, a virtual rigid body and zero-order-hold. The virtual rigid body is modeled as a virtual spring and a virtual mass. According to the virtual mass and the sampling time, the stability boundary of the virtual spring is analyzed through the simulation. As the virtual mass increases, the value of the virtual spring to guarantee the stability gradually increases and then decreases after reaching the maximum value. These simulation results show that the addition of the virtual mass enables to expand the stability boundary of the virtual spring.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.90-98
• /
• 1998

A Dual Mass Flywheel(D.M.F.) system is an evolution to the reduction of torsional vibration and impact noise occurring in powertrain when a vehicle is either moving or idling. The D.M.F. system has two flywh-eels, which is different from the conventional clutch system. One section belongs to the mass moment of in-ertia of the engine-side. The other section increases the mass moment of inertia of the transmission-side. These two masses are connected via a spring/damping system. This reduces the speed at which the dreaded resonance occurs to below idle speed. Since 1984m D.M.F. system has been developed. However, the processes of development of D.M.F. system don't have any difference from the trial and error method of conventional clutch system. This paper present the method for systematical design of D.M.F. system with dimensionless design varia-bles of D.M.F. system, mass ratio between two flywheels, natural frequency rate of two flywheels, and visc-osity coefficient. And expermental results are used to prove these theoretical results.

• 융복합기술연구소 논문집
• /
• 제7권2호
• /
• pp.25-30
• /
• 2017

This paper presents the effects of a virtual mass with a low-pass filter on the stability boundary of a virtual spring in the haptic system. In general, a haptic system consists of a haptic device, a sampler, a virtual impedance model and zero-order-hold. The virtual impedance is modeled as a virtual spring and a virtual mass. However the high-frequency noise due to the sampling time and the quantization error of sampled data may be generated when an acceleration is measured to compute the inertia force of the virtual mass. So a low-pass filter is needed to prevent the unstable behavior due to the high-frequency noise. A finite impulse response (FIR) filter is added to the measurement process of the acceleration and the effects on the haptic stability are simulated. According to the virtual mass with the FIR filter and the sampling time, the stability boundary of the virtual spring is analyzed through the simulation. The maximum available stiffness to guarantee the stable behavior is reduced, but simulation results still show that the stability boundary of the haptic system with the virtual mass is larger than that of the haptic system without the virtual mass.