• 제목/요약/키워드: 2 차법

검색결과 43건 처리시간 0.018초

거대고리 아자크라운화합물과 전이금속 및 란탄족금속이온의 착물의 안정도 (The Stability Constant of Transition and Lanthanide Metal Ions Complexes with 15 Membered Macrocyclic Azacrown Ligands)

  • 홍춘표;최용규
    • 대한화학회지
    • /
    • 제48권6호
    • /
    • pp.577-582
    • /
    • 2004
  • 새로운 아자크라운 화합물인, 1,4-dioxa-7,10,13-triazacyclopentadecane-N,N',N''-triacetic acid, $N-ac_3[15]aneN_3O_2(II_a)$과 1,4-dioxa-7,10,13-triazacyclopentadecane-N,N',N''-tripropioc acid, $N-pr_3$[15]ane$N_3O_2(II_b)$는 이와 유사한 화합물의 합성방법을 수정하여 합성하였다. 합성된 이 아자크라운 화합물, $N-ac_3[15]aneN_3O_2와\;N-pr_3[15]aneN_3O_2$의 양성자화 상수값은 전위차법을 이용하여 PKAS 프로그램으로부터 측정되어졌다. 그리고 0.1 M $NaClO_4$수용액으로 이온강도를 조절하고, $25{\pm}0.1^{\circ}C$에서 란탄족금속인, $Ce^{3+},\;Eu^{3+},\;Gd^{3+}$$Yb^{3+}$과 리간드인 $N-ac_3[15]$ane$N_3O_2$$N-pr_3[15]aneN_3O_2$의 착물의 안정도상수를 전위차법을 이용하여 BEST 프로그램으로부터 구하였고, 또한 위와 같은 조건에서 전이금속인 $Co^{2+}$, $Ni^{2+}$, $Cu^{2+}$$Zn^{2+}$와 리간드인, $N-ac_3[15]aneN_3O_2$$N-pr_3[15]aneN_3O_2$의 착물의 안정도상수 값도 전위차법을 이용하여 BEST 프로그램으로부터 측정하였다. 합성된 아자크라운 화합물과 골격구조가 유사하고 아세트산과 프로피온산기를 포함하는, 1,7-dioxa-4,10,13-triazacyclopentadecane-N,N',N''-triacetic acid과 1,7-dioxa-4,10,13-triazacyclopentadecane-N,N',N''-tripropioc acid의 착물의 안정도를 비교분석하였다.

직류전위차법을 이용한 AISI 316강 시효재의 탄소성 파괴인성 평가 (Evaluation of Elastic-Plastic Fracture Toughness of Aged AISI 316 Steel Using DC-electric Potential Method)

  • 임재규;장진상
    • 대한기계학회논문집A
    • /
    • 제21권3호
    • /
    • pp.519-527
    • /
    • 1997
  • AISI 316 steel has been used extensively for heater and boiler tube of the structural plants such as power, chemical and petroleum plants under severe operating conditions. Usually, material degradation due to microcrack or precipitation of carbides and segregation of impurity elements, is occured by damage accumulated for long-term service at high temperature in this material. In this study, the effect of aging time on fracture toughness was investigated to evaluate the measurement of material degradation. The elastic-plastic fracture toughness behaviour of AISI 316 steel pipe aged at $550^{\circ}C$for 1h-10000h (the aged material) was characterized using the single specimen J-R curve technique and eletric potential drop method at normal loading rate(load-line displacement speed of 0.2mm/min) in room temperature and air environment. The fracture toughness data from above experiments is compared with the $J_{in}$ obtained from predicted values of crack initiation point using potential drop method.

DCPD법을 이용한 분말야금 니켈기 초내열합금의 고온 피로균열진전거동 (Fatigue Crack Growth Behavior of Powder Metallurgical Nickel-based Superalloy using DCPD Method at Elevated Temperature)

  • 나성현;오광근;김홍규;김동훈;김재훈
    • 한국추진공학회지
    • /
    • 제20권2호
    • /
    • pp.11-17
    • /
    • 2016
  • 분말야금 니켈기 초내열합금은 항공기 터빈 엔진의 고온용 부품으로 사용되고 있다. 본 연구에서는 상온, $600^{\circ}C$$700^{\circ}C$에서 CT시편을 이용하여 피로균열진전거동이 평가되었다. ASTM E647에서 제시한 직류전위차법이 피로균열진전 동안에 균열 길이를 측정하기 위하여 사용되었다. 응력비 0.5에서 피로균열진전속도는 응력비 0.1에서와 비교하여 더 빠르게 나타났다. 피로균열진전속도는 응력비와 온도의 증가와 함께 증가하였다. 파단면 관찰은 파괴메커니즘 분석을 위해 수행하였다.

전위차법 효소 바이오센서를 이용한 식품의 구연산 정량분석 (Quantitative Analysis of Citrate in Foods Using a Potentiometric Enzyme Biosensor)

  • 권지영;김미라
    • 한국식품과학회지
    • /
    • 제38권2호
    • /
    • pp.169-175
    • /
    • 2006
  • Citrate Iyase(CL)와 oxaloacetate decarboxylase(OD)를 고정화하여 효소 반응기를 제작하고 효소반응으로 생성된 carbonate ion을 ion selective electrode를 이용한 전위차법 FIA system으로 식품에함유된 구연산의 농도를 측정하였다. 최적 센서 시스템의 조건은 CL과 OD을 같이 고정화시키는 방법으로 CL과 OD의 양이 각각 10 units, 60 units, 담체량은 0.3 g, carrier buffer 1(0.1 MTris buffer)은 pH 7.5, carrier buffer의 유속은 12 mL/hr으로 결정되었다. 최적 상태에서의 표준검량곡선은 $10^{-1}\;M-10^{-3}\;M$ 범위에서 직선적인 상관관계$(r^2=0.9986)$를 나타내었다. 당류와 유기산류에 대한 센서 시스템에 대한 방해효과를 측정한 결과 당류는 거의 저해효과를 보이지 않았으며 유기산의 경우도 저해 효과가 5% 미만으로 이들 물질에 의해 감응도가 크게 방해받지 않은 것으로 나타났다. 구연산 바이오센서와 GC를 사용하여 식품 시료에 함유된 구연산의 농도를 분석한 결과 두 방법간에 유의적인 차이가 없는 것으로 나타나 본 연구에서 구축한 구연산 바이오센서 시스템은 식품에 함유된 구연산 분석시 신뢰성 있는 결과를 주는 것으로 보여졌다.

메탄올, N, N-Dimethylformamide 및 Acetonitrile 속에서 2염기성 카르복시산의 해리상수 (Dissociation Constants of Dibasic Carboxylic Acids in Methanol, N, N-Dimethylformamide and Acetonitrile)

  • 문수찬
    • 대한화학회지
    • /
    • 제16권6호
    • /
    • pp.369-372
    • /
    • 1972
  • 메탄올, N, N-dimethylformamide 및 acetonitrile속에서 이염기성 카르복시산 $(HOOC(CH_2)_nCOOH$, n=0∼4)의 해리상수를 유리전극을 사용하여 전위차법으로 측정했다. 두 용매간에서 각 산의 전해리상수의 차는 거의 일정한 값이 되며, 이 값은 일염기성 카르복시산의 해리상수의 차와 거의 일치했다. 그리고 $K_1/K_2$의 값은 양성자성용매인 물과 메탄올에서보다 반양성자성용매인 N,N-dimethylformamide와 acetonitrile에서 훨씬 더 크다.

  • PDF

세자리 리간드의 전이금속 착물에 대한 합성과 전위차 및 분광학적 확인 그리고 미생물학적 연구 (Synthesis, Potentiometric, Spectral Characterization and Microbial Studies of Transition Metal Complexes with Tridentate Ligand)

  • Jadhav, S.M.;Munde, A.S.;Shankarwar, S.G.;Patharkar, V.R.;Shelke, V.A.;Chondhekar, T.K.
    • 대한화학회지
    • /
    • 제54권5호
    • /
    • pp.515-522
    • /
    • 2010
  • o-phenylene diamines, dehydroacetic acid (DHA) 및 p-chloro benzaldehyde에서 유도된 세자리 Schiff 염기 리간드인 4-hydroxy-3(1-{2-(benzylideneamino)-phenylimino}-ethyl)-6-methyl-2H-pyran-2-one (HL)의 Cu(II), Ni(II), Co(II), Mn(II) 및 Fe(III) 착물의 형성상수와 항미생물 활성과의 관계를 연구하였다.리간드와 착물은 원소분석, 전도도, 자기수자율, 열분석, X-선 회절, IR, $^1H$-NMR, UV-vis 및 질량 스펙트럼으로 특성조사를 하였다. 분석데이터로부터 착물들의 화학량론비가 1:2 (금속:리간드)임을 알았다. 금속 착물들의 몰 전도도 값은 이들의 비전해질 성질을 의미한다. X-선 회절 데이터에서 Ni(II) 착물은 단사정계 그리고 Cu(II) 및 Co(II) 착물은 삼사정계 결정계임을 규명하였다. IR 스펙트럼 데이터로부터 리간드는 중심금속에 대해 ONN 주개원자 배열의 세자리 리간드로 행동함을 알았다. 열적 행동 (TG/DTA)과 Coats-Redfern 법에 의해 계산한 반응속도 파라메터는 착물형성 과정에서 좀 더 질서 있는 활성화 상태를 제안하고 있다. 착물의 양성자화 상수를 THF:물 (60:40) 용액, $25^{\circ}C$ 및 이온세기 ${\mu}=0.1\;M$ ($NaClO_4$)에서 전위차법으로 측정하였다. Staphylococcus aureu 및 Escherichia coli.에 대한 항박테리아 활성을 시험관에서 조사하였다. 또한 Aspergillus Niger 및 Trichoderma에 대한 항세균 활성도 조사하였다. 금속 이온 및 착물의 안정도가 항미생물학적 활성에 미치는 영향을 고찰하였다.

다점지지 계류시스템의 정적해석에 대한 연구 (A Study on the Analysis of Multi-let Spread Mooring Systems)

  • 신현경;김덕수
    • 한국해양공학회지
    • /
    • 제9권2호
    • /
    • pp.53-60
    • /
    • 1995
  • A multi-leg spread mooring system for floating offshore structures is important, but the multi-leg static analysis is complicated due to the nonlinear behavior of each line and the effect of current which affects each line differently. The pretensioned position of the multi-leg mooring system obtained from the static equilibrium condition changes into a different position due to external loads and current. In this paper, the new position and the static tension at each line are caculated. The relation between the initial static equilibrium position and the new position due to the external loads is expressed in terms of the Taylor's series expansion. The Runge-Kutta $4^{th}$ method is employed in analyzing the 3-dimensional static cable nonlinear equations.

  • PDF

眞圓度 測定器의 誤差特性에 대한 解析 -위상차법- (An Analysis of Performance Error of Roundness Measuring Instrument -by phase different method-)

  • 한응교;허문석;박익근
    • 오토저널
    • /
    • 제10권3호
    • /
    • pp.31-37
    • /
    • 1988
  • A phase different method to evaluate the instrument error of roundness measuring instrument and the form error of specimens for the calibration of the instrument is used. An instrument with a rotary table supported by an air bearing was calibrated by using the standard balls as a standard. The calibration was carried out repeatedly by setting the same ball in 12 phase angles(per 30.deg.) on the table and by recording their roundness errors with a magnification of 100,000 times. As a result of data analysis of all the observations, readout at each of 144 orientations(per 2.5.deg.) from recorded data file, the error of performance of the instrument and the specimens are separated. In the particular instrument used in the present experiment, the error of the instrument was determined with the accuracy of 0.0164 (.mu.m) and the form error of the specimens was determined with the accuracy of 0.0264,0.0172(.mu.m), respectively. If the instrument was calibrated by using the above specimens, then the accuracy of the measurement of roundness error can be improved to about 0.017 (.mu.m).

  • PDF

수용액 중에서 Ni(II) 이온과 2-(2-Hydroxyethylamino)-2-(hydroxymethyl)-1,3-propanediol(Monotris)과의 착물형성에 대한 연구 (A Study on the Complexation of Nickel(II) Ion with 2-(2-Hydroxyethylamino)-2-(hydroxymethyl)-1,3-propanediol(Monotris) in Aqueous Solution)

  • 홍경희;심승보;오성근;전용진
    • 한국산학기술학회논문지
    • /
    • 제11권12호
    • /
    • pp.5221-5231
    • /
    • 2010
  • Ni(II)이온과 2-(2-Hydroxyethylamino)-2-(hydroxymethyl)-1,3-propanediol(Monotris)과의 착물형성을 $25^{\circ}C$ 이온강도 0.10M 에서 전위차법으로 연구하였다. $NiL^{2+}$ 착물은 히드록실기의 산소 원자 뿐만아니라 아민의 질소기도 금속에 배위하였다. pH가 증가하면서 $NiL^{2=}$는 3개의 수소이온이 해리된 $Ni_2L_2H_{-3}^+$의 이핵착물이 형성되었다.

Ti-3A1-2.5V 합금의 피로균열전파특성에 미치는 미세조직 및 온도의 영향 (The Effect of Microstructure and Temperature on Fatigue Crack Propagation in Ti-3A1-2.5V A11oy)

  • 임병수
    • 한국생산제조학회지
    • /
    • 제6권2호
    • /
    • pp.58-66
    • /
    • 1997
  • Ti alloys, with the advantageous tensile strength/density ratio and the chemical stability, have been used widely in the aerospace and chemical engineering industries and their usages are still expanding in various industrial areas. In the automotive industry, because of their superior merits of weight reduction and fuel saving, Ti alloys are expected to be used as various part materials including connecting rods, engine valves, springs and retainers, which are all subjected to the fatigue loads. In this study, using Ti-3A1-2.5V, the effects of temperature and microstructure change on fatigue crack propagation has been investigated. Five different microstructures were tested at the temperatures of room temperature, 20$0^{\circ}C$, 30$0^{\circ}C$ and 40$0^{\circ}C$ under the same frequency 20Hz. Some of the conclusions obtained are as follows: (1)Microstructurally, the morphology of less $\alpha$-phase and finer lamellar structure of $\alpha$ and $\beta$-Ti showed better registance to the fatigue crack propagation. (2)Fatigue crack growth rate increased with test temperature.

  • PDF