Browse > Article
http://dx.doi.org/10.6108/KSPE.2016.20.2.011

Fatigue Crack Growth Behavior of Powder Metallurgical Nickel-based Superalloy using DCPD Method at Elevated Temperature  

Na, Seonghyeon (School of Mechanical Engineering, Chungnam National University)
Oh, Kwangkeun (School of Mechanical Engineering, Chungnam National University)
Kim, Hongkyu (The 4th R&D Institute - 4th Directorate, Agency for Defense Development)
Kim, Donghoon (The 4th R&D Institute - 4th Directorate, Agency for Defense Development)
Kim, Jaehoon (School of Mechanical Engineering, Chungnam National University)
Publication Information
Journal of the Korean Society of Propulsion Engineers / v.20, no.2, 2016 , pp. 11-17 More about this Journal
Abstract
Powder metallurgy nickel based superalloy has been used in a high temperature part of turbine engine for airplane. The fatigue crack growth behavior was investigated using CT specimens for the materials at room temperature(R.T.), $600^{\circ}C$ and $700^{\circ}C$. The direct current potential drop(DCPD) method suggested by ASTM E647 was used to measure the crack length during fatigue crack growth at various stress ratios. The fatigue crack growth rate at R=0.5 was faster than that at R=0.1 for all temperature conditions and increased with the increase of stress ratio and temperature. Fractography was conducted for analysis of fracture mechanism.
Keywords
Direct Current Potential Drop; Powder Metallurgy; Nickel Based Superalloy; Fatigue Crack Growth rate;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Oh, Y.J., Kim, J.H. and Hwang, I.S., "Dynamic Loading Fracture Tests of Ferritic Steel Using Direct Current Potential Drop Method," Journal of Testing and Evaluation, Vol. 30, No. 3, pp. 221-227, 2002.   DOI
2 Zhang, L.N., Wang, P., Dong, J.X. and Zhang, M. C., "Microstructures' Effects on High Temperature Fatigue Failure Behavior of Typical Superalloys," Materials Science and Engineering A, Vol. 587, pp. 168-178, 2013.   DOI
3 Luo, J. and Bowen, P., "Small and Long Fatigue Crack Growth Behaviour of a PM Ni-Based," International Journal of Fatigue, Vol. 26, Issue 2, pp. 113-124, 2004.   DOI
4 Yang, H., Bao, R., Zhang, J., Peng, L. and Fei, B., "Crack Growth Behaviour of a Nickel-Based Powder Metallurgy Superalloy Under Elevated Temperature," International Journal of Fatigue, Vol. 33, Issue 4, pp. 632-641, 2011.   DOI
5 ASTM E647-15, "Standard Test Method for Measurement of Fatigue Crack Growth Rates," ASTM International, West Conshohocken, PA, 2015.
6 Gustafsson, D., Moverare, J., Johansson, S, Hörnqvistd, M., Simonssona, K., Sjöströma, C. S. and Sharifimajdaa, B., "Fatigue Crack Growth Behaviour of Inconel 718 with High Temperature Hold Times," Procedia Engineering, Vol. 2, Issue 1, pp. 1095-1104, 2010.   DOI
7 Kang, C.Y., "Fracture Mechanism and Micro Practography - Intergranular Fracture and Fracture at High Temperature," Journal of KWS, Vol. 22, No. 3, pp. 6-8, 2004.