• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.268-271
• /
• 2003

There are several methods for the design of 2D filter. Notable among them is McClellan transform method. This transform allows us to obtain a high order 2D FIR filter through mapping the 1D frequency points of a 1D prototype FIR filter onto 2D frequency contours. We design 2D filter using this transform. Then we notice for mapping deviation of the 2D filter. In this paper, Quadratic programming (QP) method allows us to obtain coefficients of McClellan transform. Then we compare deviation of QP method with least-squares(LS) method. Elliptic filter is used for comparison. The optimal cutoff frequencies of a 1D filter are obtained directly from the QP method. Also several problem of LS method are solved.

• The Journal of Advanced Prosthodontics
• /
• 제5권1호
• /
• pp.36-43
• /
• 2013

PURPOSE. The objective of this study was to compare the fracture toughness ($K_{Ic}$) obtained from the single edge V-notched beam (SEVNB) and the fractographic analysis (FTA) of a glass-infiltrated and a zirconia ceramic. MATERIALS AND METHODS. For each material, ten bar-shaped specimens were prepared for the SEVNB method ($3mm{\times}4mm{\times}25mm$) and the FTA method ($2mm{\times}4mm{\times}25mm$). The starter V-notch was prepared as the fracture initiating flaw for the SEVNB method. A Vickers indentation load of 49 N was used to create a controlled surface flaw on each FTA specimen. All specimens were loaded to fracture using a universal testing machine at a crosshead speed of 0.5-1 mm/min. The independent-samples t-test was used for the statistical analysis of the $K_{Ic}$ values at ${\alpha}$=0.05. RESULTS. The mean $K_{Ic}$ of zirconia ceramic obtained from SEVNB method ($5.4{\pm}1.6\;MPa{\cdot}m^{1/2}$) was comparable to that obtained from FTA method ($6.3{\pm}1.6\;MPa{\cdot}m^{1/2}$). The mean $K_{Ic}$ of glass-infiltrated ceramic obtained from SEVNB method ($4.1{\pm}0.6\;MPa{\cdot}m^{1/2}$) was significantly lower than that obtained from FTA method ($5.1{\pm}0.7\;MPa{\cdot}m^{1/2}$). CONCLUSION. The mean $K_{Ic}$ of the glass-infiltrated and zirconia ceramics obtained from the SEVNB method were lower than those obtained from FTA method even they were not significantly different for the zirconia material. The differences in the $K_{Ic}$ values could be a result of the differences in the characteristics of fracture initiating flaws of these two methods.

• Journal of applied mathematics & informatics
• /
• 제28권1_2호
• /
• pp.131-141
• /
• 2010

In this paper, we propose a new method to obtain $C^1$ MPH quartic Hermite interpolants generically for any $C^1$ Hermite data, by using the speed raparametrization method introduced in [16]. We show that, by this method, without extraordinary processes ($C^{\frac{1}{2}}$ Hermite interpolation introduced in [13]) for non-admissible cases, we are always able to find $C^1$ Hermite interpolants for any $C^1$ Hermite data generically, whether it is admissible or not.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.8-12
• /
• 1994

Solid solutions $Sr_2$($Ta_{1-x}$$Nb_{x}$)$_2$$O_{7}$ (x = 0.0 - 1.0) composed of strontium-tantalate (low Curie temperature) and strontium-niobate (high Curie temperature) were prepared by the conventional mixed oxide method and the molten salt synthesis method (flux method). Phase relation, sintering temperature, grain-orientation and dielectric properties were investigated for sintered ceramic samples with different compositions. Both Curie temperature and dielectric constant at Curie temperature were increased, and sintering behavior and the degree of grain-orientation were improved with the increase of Nb content. Single phase $Sr_2$$Nb_2$$O_{7}$ powder was synthesized by using flux method at lower temperatures, and sintering temperature was also reduced by using flux method derived powder than using mixed-oxide derived powder. Sintering characteristics and dielectric properties of specimens prepared by flux method were better than those derived through the conventional method.

• 한국세라믹학회지
• /
• 제16권3호
• /
• pp.155-163
• /
• 1979

This study was to explore the characteristics of 6 mole% CaO stabilized $ZrO_2$ prepared by wet chemical methods. The results of the experiments were as follows: 1. The powder calcined at 1000$^{\circ}$-110$0^{\circ}C$ was partly agglomerated. The morphology of agglomerate was spherical of 0.5-1$\mu{m}$ in size for Hot Petroleum Drying Method, chain-like of 1-2$\mu{m}$ for Freeze Drying Method, and irreqular of 2-3$\mu{m}$ for Coprecipitation Method. 2. Optimum calcining conditions for powder prepared by wet chemical methods were found: 110$0^{\circ}C$, 2h in air for Hot Petroleum Drying Method and Freeze Drying Method, and 100$0^{\circ}C$, 2h in air for Coprecipitation Method. 3. When specimen was calcined at 1000$^{\circ}$-110$0^{\circ}C$ in air for 2h and then sintered at 1$600^{\circ}C$ in air for 4h, the specimens prepared by wet chemical methods showed a high sintered density (94% of theoretical density) and a low open porosity (<0.8%); however, the sintered density of the specimen prepared by Oxide Wet Mixing Method was 90%. 4. The amount of cubic phase of sintered body prepared by wet chemical methods was observed to be higher than the one prepared by Oxide Wet Mixing Method. 5. It was found that Hot petroleum Drying Method, Freeze Drying Method and Coprecipitation Method were nearly the same in respect of the results of stabilization grade and sintered density of CaO-stabilized $ZrO_2$.

• 산업경영시스템학회지
• /
• 제16권28호
• /
• pp.137-143
• /
• 1993

Generally there are three methods to derive an approximation formula: 1) approching standard normal distribution by appropriate changing variable 2) using standardization variable for expansion 3) deriving approximation formula by direct method. This paper present correction terms having the form of $C_{1/v^{n/2}}/{\;}+{\;}C_2{\;}(n=1,2)$ with respect to $x^2_{\alpha}(v)$ distribution (${\nu}{\;}{\leq}{\;}30$), which minimize the error by EDA method and least square method.

• 대한가정학회지
• /
• 제31권4호
• /
• pp.37-51
• /
• 1993

The Objects of this study are: 1. To compare the housework time of housewives by region and employment status. 2. To compare the economic value of housework by region and employment status. 3. To evaluate the economic value of housework by each method. The subjects of this study were 815 housewives living in Taegu and Kyungsangpookdo. The statistics used for data analysis were frequency, percentile, T-test, ANOVA and Seheffe test by SPSS PC programs: 1) The average housework time was 7.8hours per day. Full-time housewives spent 8.2hours and employed housewives spent 6.7hours to housework. 2) Partially there were significant difference in economic value of housework by employment status. 3) Estimates of economic value of housework by each method of evaluation are : (unit : won) sample mean method monthly (1) Specialized substitute method 587,080 (2) Overall substitute method 760,640 (3) Opportunity cost method 556,060 (4) Reservation wage method 534,070 (5) Subjective evalution method 644,540

• 한방안이비인후피부과학회지
• /
• 제35권1호
• /
• pp.24-37
• /
• 2022

Objectives : The purpose of this literature review is to analyze process of manufacture and formulation and toxicity of Geumgweyoryak(金匱要略)'s external applicants for modern and safe using. Methods : This study used the Geumgweyoryak(金匱要略) reprinted by Zhao Kaimei(趙開美) as basic data for a understanding of the manufacture and formulation and toxicity for external applicants. Among the 25 chapters, the 22 chapters were studied except for the last three chapters, which are known to be written by later writers. Based on the above, Geumgweyoryeok(金匱要略)'s external applicants was analyzed the process of manufacture, formulation and the toxicity. Results : There are 11 types of external applicants of Geumgweyoryak(金匱要略). Washing method(洗法) was used 2 times, Drop method(瀝法) was used 1 time, Smoke method(熏法) was used 2 times, Rubbing method(摩法) was used 1 time, Plaster method(敷法) was used 2 times, Invading method(浸法) was used 1 time, Suppository method (坐法) was used 2 times, Flatiron method(烙法) was used 1 time. According to classified the modern formulation, there are 4 types of powder formulation, 4 types of liquid formulation, 2 types of suppository, and 1 type of Semi-solid formulation. Especially toxic drugs, such as Realgar(雄黃) or Hydrocerussite(鉛粉), should be careful. When Realgar(雄黃) smokes, a toxic substance called AS2O3 can come out. Hydrocerussite(鉛粉) can cause lead poisoning. Lead increases the risk of anemia, dehydration, and lead neuropathy when chronically exposed. Conclusion : We supposed that this study can serve as a basic data to help clinical Korean doctors to use the prescription for external applicants more safely and to easily apply it in the form of external applicants.

• 한국수학사학회지
• /
• 제31권4호
• /
• pp.183-196
• /
• 2018

In this study, we propose an approximate method to make Jisuguimundo with magic number 93 to 109. In this method, for two numbers p, q with a relationship of M = 2p+q, we use eight pairs of two numbers with sum p and five pairs of two numbers with sum q. Such numbers must be between 1 and 30. Instead of determining all positions of thirty numbers, this method shows that Jisuguimundo with magic number 93 to 109 can be made by determining positions of thirteen numbers $a_i$(i = 1, 2, ${\cdots}$, 8), $b_5$, $c_i$(i = 1, 2, 3, 4). Method 1 is used to make Jisuguimundo with magic number 93 to 108, and method 2 is used to make Jisuguimundo with magic number 109.

• 한국인터넷방송통신학회논문지
• /
• 제16권2호
• /
• pp.41-47
• /
• 2016

암호학의 암호 생성과 해독의 곱셈 횟수는 대부분 $a^b$(mod m) 모듈러 지수연산의 효율적 구현여부로 결정된다. 표준 모듈러 지수연산법으로는 1-ary법인 이진법이 있으며, n-ary($2{\leq}n{\leq}6$)법이 많이 적용되고 있다. n-ary($1{\leq}n{\leq}6$)법은 $b=b_kb_{k-1}{\cdots}b_1b_{0(2)}$에 대해 R-L 방향으로 n비트로 고정된 분할을 하고, n회 제곱과 비트값 곱셈을 수행하는 제곱-곱셉법이다. 본 논문에서는 $b_{k-1}{\cdots}b_1b_{0(2)}$에 대해 L-R 방향으로 가변길이로 분할하는 방법을 적용한다. 또한, 개변길이의 제곱과 곱셈 또는 나눗셈을 적용한다. 제안된 가변길이 분할법은 고정길이 분할법인 n-ary법에 비해 곱셈 수행횟수를 감소시킬 수 있었다.