• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.128.2-128.2
• /
• 2010

For stationary 1kW-class fuel cell systems to be used widely, it is essential to achieve dramatic improvements in system durability as well as cost reduction. In order to address this engineering challenge, it is important to develop innovative technologies associated with BOP components. According to this background, in 2009, the Korean Government and "Korea Institute of Energy Technology Evaluation and Planning(KETEP)" launched into the strategic development project of BOP technology for practical applications and commercializations of stationary fuel cell systems, named "Technology Development on Cost Reduction of BOP Components for 1kW Stationary Fuel Cell Systems to Promote Green-Home Dissemination Project". The objectives of this project are to develop fundamental technologies to meet these requirements, and to improve the performance and functionality of BOP components with reasonable price. The project consortium consists of Korea's leading fuel cell system manufacturers, BOP component manufacturers which technologically specialized, and several research institutions. This paper is to provide a summary of the project, as well as the achievements made through the 1st period of the project(2009~2010). Several prototypes of BOPs - Cathode air blowers, burner air blowers, preferential oxidation air blowers, fuel blowers, cooling water pumps, reformer water pumps, heat recovery pumps, mass flow meters, valves and power conditioning systems - had been developed through this project in 2010. As results of this project, it is expected that a technological breakthrough of these BOP components will result in a substantial system cost reduction.

• 대한기계학회논문집A
• /
• 제32권8호
• /
• pp.693-700
• /
• 2008

The primary mirror system in a satellite camera is an opto-mechanically coupled system for a reason that optical and mechanical behaviors are intricately interactive. In order to enhance the opto-mechanical performance of the primary mirror system, opto-mechanical behaviors should be thoroughly investigated by using various analysis procedures such as elastic, thermo-elastic, optical and eigenvalue analysis. In this paper, optimal design of the bipod flexure mounts for high opto-mechanical performance is performed. Optomechanical performances considered in this paper are RMS wavefront error under the gravity and thermal loading conditions and 1st natural frequency of the mirror system. The procedures of the flexure mounts design based on design of experiments and statistics is as follows. The experiments for opto-mechanical analysis are constructed based on the tables of orthogonal arrays and analysis of each experiment is carried out. In order to deal with the multiple opto-mechanical properties, MADM (Multiple-attribute decision making) is employed. From the analysis results, the critical design variables of the flexure mounts which have dominant influences on opto-mechanical performance are determined through analysis of variance and F-test. The regression model in terms of the critical design variables is constructed based on the response surfaceanalysis. Then the critical design variables are optimized from the regression model by using SQP algorithm. Opto-mechanical performance of the optimal bipod flexure mounts is verified through analysis.

• 임상간호연구
• /
• 제23권3호
• /
• pp.341-349
• /
• 2017

Purpose: Focusing manner is very powerful mind-body self-help and self-awareness competence. So focusing manner may affect nurses' emotional labor and nursing performance, but few are known about it to date. The purpose of this study was to identify the degree of focusing manner, emotional labor, nursing performance of clinical nurses, and the factors that affect nursing performance. Methods: In order to collect data, structured questionnaires were administered to 212 nurses who worked at 2 university hospitals located in D city. Data were analyzed by t-test, ANOVA, correlation and multiple regression using SPSS/WIN 20.0. Results: Nursing performance had positive relationship with focusing manner (r=.45, p<.001), and negative relationship with emotional labor (r=-.25, p<.001). And the most prediction factor influencing nursing performance was focusing manner (${\beta}=.41$, p<.001) and the other factors were age (${\beta}=.30$, p=.002), and emotional labor (${\beta}=.14$, p=.012). The total variance was 37.1% by those predictors (F=25.87, p<.001). Conclusion: Based on the results of this study, it is necessary to develop and educational program on focusing manner-oriented psychotherapy in order to improve the nursing performance. Also, the management system for controlling emotional labor needs to be set up for nurses in clinical settings.

• 한국해양공학회지
• /
• 제33권2호
• /
• pp.196-202
• /
• 2019

In this study, the excessive noise and vibration phenomena of a high-speed Ro/Ro passenger ship were analyzed, and a countermeasure was taken based on them. This ship was granted a comfort class notation by the classification society, which was COMFORT-VIBRATION-II and COMFORT-NOISE-CREW-II. However, unfortunately, excessive noise and vibration in the aft part of the ship were delivered from the twin shaft propellers, and therefore the Class Requirement was not satisfied before delivery. In order to obtain the class notation, all of the concerned parties came to an agreement to reduce the noise and vibration level during operation after delivery because a seasonal ferry service was already scheduled and the cabin was fully booked. The root cause of the massive amount of noise and vibration was mainly the propeller-induced excitation pulse and beating that occurred from the mismatch of the rotating speeds of the two shaft lines. A 1st order vibrating force and beating phenomena existed in the propeller. Thus, a reduction of the excitation force, elimination of the beating phenomena, and decrease of the noise level at the aft area cabins and public spaces were required. In addition, structural reinforcements were conducted using pillars and additional girders at the aft part of the decks.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.50-55
• /
• 2007

We have installed a 61-channel magnetocardiography (MCG) system inside a magnetically shielded room (MSR) with a size of $2.4\;m\;{\times}2.4\;m\;{\times}2.4\;m$. The MCG system consists of 1st-order axial gradiometers containing double relaxation oscillation SQUIDs (DROSs) with pick-up coils of a base line of 70 mm. The MSR holds a shielding factor of 50 at 0.1 Hz and 10000 at 100 Hz, when its door in the middle on a front wall is closed. On opening the MSR door, we have obtained the characteristics of the MCG system with a 2.9 Hz noise generated from an air conditioning unit at 13 m distance off the MSR. In an open-door MSR ($140^{\circ}$ opening), a noise at the center channel increases up to $700\;fT/Hz^{l/2}$ at 2.9 Hz and $1.7\;pT/Hz^{1/2}$ at 60 Hz. MCG signals for a healthy human do not show distortion until the door opens to $45^{\circ}$, but show the effect of noise when the door opens further at $90^{\circ}$ and $140^{\circ}$. With the door opens to $45^{\circ}$, MCG measurement can be performed with ease of door operation and without creating claustrophobia for the patient.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.89.1-89.1
• /
• 2011

According to green growth's policy, green-home dissemination's projects are promoting. Among them, stationary fuel cell systems are receiving attention due to high efficiency and clear energy. But it need absolutely to develop cost down technologies and improve system durability for commercialization of the fuel cell system. To achieve this objectives, in 2009, the Korean Government and "Korea Institute of Energy Technology Evaluation and Planning(KETEP)" launched into the strategic development project of BOP technology for practical applications and commercializations of stationary fuel cell systems, named "Technology Development on Cost Reduction of BOP Components for 1kW Stationary Fuel Cell Systems to Promote Green-Home Dissemination Project". This paper introduces a summary of improved BOP performances that has been achieved through the 2nd year development precesses(2010.06~2011.05) base on 1st year development precesses(2009.06~2010.05). The major elements for fuel cell systems are cathode air blowers, burner air blowers, preferential oxidation air blowers, fuel blowers, cooling water pumps, reformer water pumps, heat recovery pumps, mass flow meters, electrical valves, safety valves and a low-voltage inverter. Key targets of those elements are the reduction of cost, power consumption and noise. Invert's key targets are development the low -voltage technologies in order to reduce the number of unit cell in fuel cell system's stack.

• 대한예방한의학회지
• /
• 제3권2호
• /
• pp.101-128
• /
• 1999

A study on disease treated at oriental medical treatment facilities (OMTF) and patients' satisfaction levels was conducted in order to figure out why the patients visited oriental medical doctors and the level of satisfaction of the patients for the services offered to them by oriental medical doctors. This study was performed from March 2 through May 31, 1998 by interviewing 1.532 persons living in major and small cities in korea. The results obtained were summarized as follows; 1. The general characteristics of subjects. The highest portion of each part was, 66.9% female, persons in the age group of over 60's 22.7%, high school graduated 34.9%, house wife 30.8%, The married 65.0%, Buddhist 36.9%, maj or city residents 60.2%, company covered insurance benefiter 39.0% and etc. 2. 40.5% of subjects visited OMTF for skeletal and connective tissue diseases. 21.5% for digestive system diseases. 16.2% for respiratory system diseases. 13.3% for circulatory system diseases and 9.0% for neurological problems. 3. 42.7% of males visited OMTF for skeletal and connective tissue diseases, which were the highest and respiratory system disorders, digestive system disorders, circulatory system disorders and neurological diseases in order. 39.4% of females visited OMTF for skeletal and connective tissue disorders which were the highest and other conditions such as digestive system, circulatory, respiratory, and neurological disorders in order. 4. The males with circulatory system disorders were treated by herbal medicine, combination of herbal medicine and acupuncture, only in order. The females with the some conditions above were treated by combination of herbal medicine and herbal medical and acupuncture only in order. The males and females with respiratory system and digestive system diseases were treated by herbal medicine, combination of herbal medicine and acupuncture only in order. But the males and females with skeletal and connective tissue diseases were by acupuncture are the highest in order. 5. The females and persons in the age group of over 60' s and house wife. the not married, the unhealthy persons, residents living in small cities, the persons with high income by medical treatments frequency in circulatory system diseases are the highest. 6, The females, middle school graduated and the married, persons in the age group of over 60's, unemployed, sales and service industry workers, Buddhists, major city residents, the unhealthy persons, the persons with middle income by medical treatments frequency in respiratory system diseases are the highest. 7. The females, persons in the age group of over 60's, under graduated or elementary school graduated, the unemployed and house wife, the unmarried, Buddhists, major city residents, the unhealthy persons, the persons with low income by medical treatments frequency in digestive system diseases are the highest. 8. The males, major city residents, old ages, under graduated or elementary school graduated, go earn officials, people grown in small city, the persons who had health insurance policies, the persons with low income, the unhealthy persons by medical treatments frequency in skeletal and connective tissue disorders diseases. 9. 50.8% of the respondents said that the treatments at the OMTF were very effective. 47.7% of them said that the treatments were effective. The males, persons in the age group of 40's, high school graduates, official workes, the married, the persons who did not have religion, major city residents, the persons who had health insurance policies, the persons with high income and the healthy persons said that the treatment effects at OMTF were satisfactory. 10. The patients' satisfaction rate for OMTF on each disease is, 1st. Musculo-Skeletal system(most satisfied), 2nd. the pregnancy & delivery complications, 3rd. Eye & ophthalmics, 4th. Respiratory system, 5th. Mental & bodily disorder, 6th. Digestive system and etc. 11. The factors affect OMTF are age, satisfaction for OMTF, current disease, religion, efficiency of Oriental Medicine, health condition and etc. This explained power of variable were 39.0%. 12. The satisfied factors for OMTF is correlate to educational level, and economical variables.

• 핵의학기술
• /
• 제20권2호
• /
• pp.62-68
• /
• 2016

1. 목적 자동분주기를 이용하여 검사한 Cyclosporine검사에서 표준액들이 curve를 벗어나고, 결과값의 재현성이 크게 떨어지는 것이 발견되었다. Cyclosporine검사는 다른 검사와 차이점이 methanol과 전혈을 혼합 후 원심분리 하여 methanol 추출액을 사용하여 검사를 한다는 것이다. 검사 결과 이상의 원인이 methanol 사용에 의한 것으로 파악되어 본 실험을 시작하였다. 본원에서 사용하는 분주기는 Perkin Elmer 사의 Multiprobe II plus 로, 분주하는 액체의 점도, 샘플링 tip의 size, 사용하는 모터의 속도에 따라 여러 설정값을 조정하라고 안내되어 있을 뿐 정확한 지침은 없었다. 이에 사용하는 액체별 분주성능을 측정하고 최적의 분주성능을 위한 설정값을 찾기 위해 연구하였다. 2. 대상 및 방법 분주력 측정을 위해 4가지 용액(water, serum, methanol, PEG 6000(25%))와 $TSH^{125}I$ tracer (515 kBq)을 사용 하였고, 실제 결과 값을 비교하기 위해 2016년 1월에 본원에 검사 의뢰된 Cyclosporine검체 29개를 측정하였다. 4가지의 용액을 multi pipette을 이용하여 각각 $400{\mu}l$ 분주하고 tracer $100{\mu}l$씩을 섞어 용액별로 8개의 검체를 준비하였다. 준비된 sample을 분주기로 $100{\mu}l$씩 분주하여 CPM을 측정하고, 용액별로 CV(%)를 계산하였다. 그리고 분주기의 air gap, 분주속도와 지연시간을 변경한 후 다시 분주하여 측정한 CPM을 CV(%)로 계산하여 설정 값 변경에 따른 CV(%)값의 변화를 측정하여 최적의 설정 값을 찾는다. Cyclosporine검체 29개를 (1)manual검사 (2)기존 설정 값으로 검사 (3)수정한 설정값으로 검사 했을 때의 결과를 비교하였다. 용액별 분주력 평가는 CV(%)를 이용하여 계산하였고, 실제 검사 결과 값의 비교는 manual검사 결과를 기준으로 기존 설정 값으로 검사 했을 때, 수정한 설정 값으로 검사 했을 때의 결과 값을 Difference(%)와 상대오차(%Relative error : %RE)로 비교해 보았다. 3. 결과 4가지 용액과 tracer를 섞어 분주한 CPM의 CV(%)는 water 0.88, serum 0.95, methanol 10.22, PEG는 0.68로 methanol을 제외한 용액들은 1% 이내였으나, methanol은 CPM 차이가 두드러졌다. methanol 분주를 기존 설정 값인 Transport air gap 0에서 2와 5로 변경하여 검사 시 CV(%)는 각각 20.16, 12.54, System air gap 0에서 2와 5로 변경 시 8.94, 1.36으로 나타났다. System air gap 2, Transport air gap 2로 변경 시 CV(%)는 12.96, System air gap 5, Transport air gap 5로 변경 시 1.33 이었고, Dispense speed를 300에서 100으로 변경 시 CV(%)는 13.32, Dispense delay를 200에서 100으로 변경 시는 13.55인 것으로 나타났다. 분주기를 이용하여 기존설정 값으로 검사 시에는 manual검사 결과 값에 비해 평균 99.44%증가 하였고, 상대오차는 93.59%로 나타났다. 수정된 설정 값(System air gap 0에서 5로 변경, 다른 설정은 기존과 동일)으로 검사 했을 때는 manual검사 결과 값에 비해 결과가 평균 6.75% 증가 하였고, 상대오차는 5.10%로 상대오차의 허용기준치 10%에 비하여 양호한 결과가 나왔다. 4. 결론 Transport air gap, Dispense speed, Delay time을 조정하였을 때는 CV(%)가 증가하였고, System air gap을 조정 하였을 때 CV(%)가 현저하게 감소하였다. 실제 검사결과에서도 이를 확인 할 수 있었다. methanol을 이용한 Cyclosporine검사 kit는 올해 2월에 단종이 되었지만, 분주기를 사용함에 있어 용액에 따른 분주성능에 차이가 있을 수 있음을 염두해 두어야 하고 새로운 용액을 분주해야 할때는 미량저울로 분주량을 측정하거나 CPM으로 분주성능을 측정하여 해당 용액이 분주기를 사용함에 적절한지 검증 후 사용하여야 할 것으로 사료되어 본 실험결과를 보고하고자 한다.

• 대한방사선치료학회지
• /
• 제26권1호
• /
• pp.51-57
• /
• 2014

목 적 : 췌장암의 경우 십이지장에 부여되는 선량 분포가 중요하게 다뤄진다. 십이지장의 경우는 호흡에 따라 변화가 발생된다. 이에 본 논문에서는 본원에 설치된 CT-on rail System을 이용하여 환자의 Kilovoltage Cone-Beam CT 촬영하여 십이지장의 위치 변화를 파악하고 체적 당 부여받는 선량의 변화를 파악하고자 한다. 대상 및 방법 : 3 명의 환자를 대상으로 CT-on rail System을 이용하여 KVCBCT를 획득하고 SYNGO Software를 이용하여 최초의 치료계획 영상과 비교 십이지장의 위치 변화를 파악하였다. 획득한 영상을 치료계획장치인 Pinnacle로 전송하여 변화된 위치에서 치료 용적에 포함되는 십이지장의 체적 변화를 파악하고 같은 선량에서 발생되는 체적의 변화를 분석하였다. 결 과 : 위치 변화 분석에서 좌우(Left-Right Direction) 방향에서 1.2cm, 1.0cm 머리 다리(Craniocaudal Direction) 방향에서는 0cm, 0.8cm 전후(Anterior-Posterior Direction) 방향에서는 0.1cm, 1.0cm의 변화를 나타내었다. 체적의 변화는 환자 1의 경우는 최초 치료계획에 비해 체적이 최대 약 460%, 최소 120% 증가하였고 환자 2는 최대 490%, 최소 160% 증가하였다. 반면 환자 3은 최대 150% 증가하였으나 최소 값에서는 약 30% 감소함을 나타내었다. 호흡의 변화에 따라 가장 많은 변화를 나타낸 환자 1의 경우는 최초의 치료계획과 비교하였을 시 초기 선량에서는 변화가 크게 나타나지 않았지만 선량이 증가함에 따라서 $V_{10}$에서는 118%, $V_{20}$ 117%, $V_{30}$ 400%, $V_{40}$ 480%의 체적 변화가 발생됨을 알 수 있었다. 결 론 : 현재 3D-CRT를 이용한 방사선 치료 시 4D-CT를 이용한 모의치료를 통해 환자의 호흡에 따른 십이지장의 위치 변화에 대해 파악하고 정확한 치료계획용적의 설정을 통해 호흡에 따른 십이지장의 체적 변화를 예측하고 이에 맞는 적합한 치료 계획을 세워 십이지장에 부여될 수 있는 선량을 최소화 시켜야 할 필요성이 있다고 사료된다.

• 서비스연구
• /
• 제6권4호
• /
• pp.35-45
• /
• 2016

본 연구는 선행연구에서 제시된 ERP시스템의 운영단계의 성공요인들에 대해서 전문가 그룹의 면담과 의견 수렴과정을 거쳐 중요 핵심 성공요인을 도출하고, 도출된 성공요인들을 계층화 의사결정법(AHP)을 이용하여 각 요인들에 대한 상대적인 중요도를 분석하였다. 1차 계층의 성공 요인들에 대한 중요도 분석에서는 조직/인력 요인의 중요도가 가장 높은 것으로 나타났으며, 2차 계층의 성공요인을 1차 계층의 중요도를 고려한 가중치 분석에서는 경영진의 지원과 관심이 가장 중요한 요인으로 분석되었고, 그 다음으로 프로세스 최적화, 변화관리, 운영조직의 지원, 프로세스 혁신조직 유지 순으로 분석되었다. 따라서 본 연구에서는 ERP 시스템의 운영단계에서 ERP 시스템의 도입 성과를 극대화하기 위해서는 경영진의 지속적인 지원과 관심뿐만 아니라 ERP 시스템의 도입으로 인한 내부 환경 변화에 대한 적절한 변화관리가 요구되며, ERP 시스템을 전담하는 운영조직의 지원과 프로세스에 대한 지속적인 혁신을 위한 별도의 조직을 갖추어야 할 것이라는 연구결과를 제시할 수 있었다.