• The KIPS Transactions:PartB
• /
• v.13B no.6 s.109
• /
• pp.585-590
• /
• 2006

Although motion estimation Plays an important role in digital video compression, complex search procedure is required to find an optimal motion vector. To reduce the search time, the search start point should be set up properly md efficient search pattern is needed. If the overall motion of the torrent block can be predicted, motion estimation can be performed efficiently. In this paper. block types are classified using candidate vectors and the motion activity of the block is predicted which leads to the search start point close to the optimal motion vector. The proposed method proves to be about 1.5$\sim$7 times faster than existing methods with about 0.02$\sim$0.2(dB) improvement of picture quality in images with large movements.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.895-902
• /
• 2014

This paper presents a 2-stage CMOS power amplifier for the 1.75 GHz band using a $0.18-{\mu}m$ CMOS process. Using ADS simulation, a power gain of 28 dB and an efficiency of 45 % at an 1dB compression point of 27 dBm were achieved. The implemented CMOS power amplifier delivered an output power of up to 24.8 dBm with a power-added efficiency of 41.3 % and a power gain of 22.9 dB. For a 16-QAM uplink LTE signal, the PA exhibited a power gain of 22.6 dB and an average output power of 23.1 dBm with a PAE of 35.1 % while meeting an ACLR(Adjacent Channel Leakage Ratio) level of -30 dBc.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.346-349
• /
• 2003

A SiGe HBT MMIC double balaced up-converter has been designed and fabricated for C-band WLAN applications. The up-converter is based on the Gilbert cell mixer with an active baluns for differential inputs of LO and IF signals. The designed up-converter exhibits a conversion gain 12.5dB for a -10 dBm LO power. It also exhibits LO-RF isolation of 19.3dBc, and IF-RF isolation of 23.3 dBc at a 1-dB compression point of -14.2dBm

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.45-49
• /
• 2009

In this paper, a direct down conversion LNA/Mixer has been designed and tested for 900Mhz UHF RFID application. The designed circuit has been implemented in 0.18um CMOS technology with 3.3V operation. In this work, a common gate input architecture has been used to cope with the higher input self jamming level. This LNA/Mixer is designed to support two operating modes of high gain mode and low gain mode according to the input jamming levels. The measured results show that the input referred P1dBs are 4dBm of high gain mode and 11dBm of low gain mode, and the conversion gains are 12dB and 3dB in high and low gain mode respectively The power consumptions are 60mW for high gain mode and 79mW for low gain mode. The noise figures are 16dB and 20dB in high gain mode and low gain mode respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2489-2497
• /
• 1994

This paper presents the development of a 10 W solid-state hybrid power amplifier(SSPA). operating over $7.7\sim8.5GHz$. The fabrication and measurement of this amplifier are performed with 3 sections, such as the front one for high gain, the middle one for driving, and high power one, to minimize the risk of failure and to increase the easiness of development. and then the final amplifier is realized by connecting 3 sections above mentioned, DC bias circuit, and temperature compensation circuit on one housing. Total small signal gain obtained is about $45\pm1dB$, the input and output return losses are 25 and 27 dB respectively. The output power measured at 1 dB gain compression point for 3 frequencies at 7.7, 8.1, and 8.5 GHz are $39.8\sim40.4dBm$, which is about 10 W. and the 3rd-order harmonic powers of 2 tones test are 13.34 dBc at output power 37.5 dBm. These obtained results satisfies the initially required specification. and the realized SSPA can be installed as a subsystem of the microwave transponder for telecommunication.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.1
• /
• pp.53-60
• /
• 1996

The 8W hybrid MIC SSPA has been developed in the frequency range from 14.0 GHz to 14.5 GHz for uplink of KOREASAT's earth station. The whole system was designed of two parts with driving amplifier and high power amplifier to simplify the fabrication process. we reduced weight and volum of power amplifier through arranging the bias circuits in the same housing. The realized SSPA has a small signal gain of $26\pm1dB$within 500 MHz bandwidith, and the input and output return losses are over 7dB and 12dB respectively. The output power of 39.0 ~ 39.2dBm is achieved at the 1dB gain compression point of 14 GHz, 14.25 GHz, and 14.5 GHz. That reveals higher power than 8W of design target. The proposed SSPA manufacture techni- ques in this paper can be applied to the implementation of power amplifiers for some radars and SCPC.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.134-138
• /
• 2005

In this paper, we have developed a new type of the microwave phase conjugator for the active retrodirective antenna array. The circuit topology is consisted of a 2-port structure to avoid the complexity of LO and RF signal combination and matching, using the cascade connection of two single-ended mixers. The operating frequencies are 4.0 GHz, 2.01 GHz and 1.99 GHz for LO, RF, and IF, respectively. Conversion loss is measured to be -7 dB and 1-dB compression point 15 dBm with the LO power of 9 dBm. For the most important parameter, the isolation between RE leakage and IF signal is as high as 25 dB.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1058-1063
• /
• 2010

In this paper, we designed self-frequency synchronizing circuit using image rejection mixer(IRM) and single-sideband(SSB) up-converter which can effectively eliminate the image frequencies occurred in multi-channel super-heterodyne receivers and help us to match inter-channel phase. Also the self-frequency synchronizing circuit simplifies system because there need no extra devices for making intermediate frequency(IF) by creating the local signal within several nanoseconds by means of generating the same frequency of IF signal and modulating radio frequency(RF) signal. We adopt the limiting amplifier for the purpose of protecting the circuit from spurious signals which come from the front end side having wide instantaneous bandwidth characteristics and constantly injecting same level into the input local signal of IRM. The IRM we fabricated has image rejection ratio of 27dB, which is good over 7dB for foreign company's. Also, the SSB up-converter we fabricated has 1dB compression point of 18dBm, which is good over 16dB for foreign company's. And the size is compact about one-forth.

• Journal of IKEEE
• /
• v.4 no.2 s.7
• /
• pp.241-248
• /
• 2000

A linear power amplifier is particular emphasized on the CDMA system using a linear modulation scheme, because intermodulation distortion which cause adjacent channel interference and co channel interference is mostly generated in a nonlinear power amplifier. In this paper, a new type of linearization technique proposed. It is presented that balanced MESFET predistortion linearizer added. Experimental result are present for Korea PCS(Personal Communication Service) frequency band. The implemented linearizer is applied to a 30dBm class A power amplifier for simulation Performance. The predistortion linearizer improves the 1dB compression point of the HPA about 2dBm, and intermoudulation distortion about 12.5dBc.

• The KIPS Transactions:PartB
• /
• v.9B no.2
• /
• pp.199-204
• /
• 2002

Since motion estimation and motion compensation methods remove the redundant data to employ the temporal redundancy in images, it plays an important role in digital video compression. Because of its high computational complexity, however, it is difficult to apply to high-resolution applications in real time environments. If we have information about the motion of an image block before the motion estimation, the location of a better starting point for the search of an exact motion vector can be determined to expedite the searching process. In this paper, we present an adaptive motion estimation approach bated on temporal correlations of consecutive image frames that defines the search pattern and determines the location of the initial search point adaptively. Through experiments, compared with DS(Diamond Search) algorithm, the proposed algorithm is about 0.1∼0.5(dB) better than DS in terms of PSNR(Peak Signal to Noise Ratio) and improves as high as 50% compared with DS in terms of average number of search point per motion vector estimation.