• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.4
• /
• pp.649-659
• /
• 1999

본 연구에서는 점탄성감쇠기가 설치된 비비례 감쇠 구조물의 바람에 대한 확률적 응답을 진동수영역에서 구하였다. 복소수 고유치 및 고유백터를 바탕으로 모드중첩법을 이용하여 응답의 RMS 값을 구하고 그것을 근사적인 방법인 모드 변형에너지법에서 얻은 결과와 비교하였다. 또한, 가력 진동수에 따라서 변하는 점탄성감쇠기의 강성 및 감쇠 계수를 상수로 모형화하였을 때의 풍응답 해석 결과의 정확성을 진동수영역에서 검증하였다. 해석결과에 의하면 감쇠기의 진동수 의존 특성은 구조물의 1차 고유 진동수에 의해서 비교적 정확하게 표현되었고, 모드 변형에너지법은 대체로 정확한 결과를 도출하였지만, 가속도 응답을 구할 때에는 다소 큰 오차를 유발하였다.

• Journal of Radiation Protection and Research
• /
• v.13 no.2
• /
• pp.21-28
• /
• 1988

Absorbed dose in water was analyzed by Burlin's general cavity theory for medium X-ray energy region (HVL : 0.29, 0.84, 1.60, 2.62mm Cu) using LiF : PTFE TL dosimeter(0.4 mm ${\times}\;{\phi}$ 12.5mm, hot-pressed LiF TLD-700) which was enclosed in lucite capsule. The absorbed dose rate at 5cm depth in water phantom was determined with measurement error of ${\pm}5%$. This result was compared to that of the ionization method, indirectly absolute measurement method, of which measurement error of ${\pm}2%$. The difference between these two results lies within measurement error of LiF : PTFE method. Therefore, the absorbed dose in water obtained by LiF: PTFE is reliable, and this result suggests the base to estimate dose-equivalent for medium X-rays.

• Journal of Korea Water Resources Association
• /
• v.35 no.4 s.129
• /
• pp.385-395
• /
• 2002

A stochastic model using FOEA(First-Order Error-Analysis) and Monte Carlo Method is developed to predict water quality variation in a river. A sensitivity analysis using influential matrix is performed to determine the significant reaction coefficients. Also the BFGS (Broyden-Fletcher-Goldfarb-Shanno) optimization method is applied to estimate the optimal values of the major reaction coefficients. The developed stochastic model is applied to the real study reach and the results are agreed well with those of deterministic analysis. The process for analyzing the uncertainties of the discharge, water quality and reaction coefficients of headwater and tributaries is included in the model to estimate the influence on the water quality variation at downstream. The extents of contribution of the uncertainties influencing on the total uncertainty can be evaluated from the results of the model.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.31.3-31.3
• /
• 2011

달의 양방향 분포 함수는 Hapke에 의하여 처음 이론적 모델이 만들어졌고, 이후 Foote에 의해 아폴로 11호의 달 토양 샘플 10084의 양방향 분포 함수가 측정된 바 있다. 이 연구에서는 실제 크기의 달의 표면에 Hapke의 양방향 분포 함수를 적용하여 광학 모델은 개발하였다. 달 표면의 산란특성 중 반 무한하고 매끄러운 지면에 적용되는 후방산란 효과와 산란각에 따른 위상 함수가 적용된 모델이 사용되었으며, 위상함수로는 Henyey-Greenstein 함수가 사용되었다. 달의 3D 모델에 사용된 매개 변수는 Foote가 측정한 Hapke의 변수를 따랐으며 달의 단일 산란 알베도는 w=0.33, 핫스팟의 넓이는 h=0.017, Legendre 다항 계수인 b와 c에는 각각 b=0.308, c=0.425의 값이 사용되었다. 구성된 달의 양방향 분포 함수를 이용한 통합적 광선 추적 수치 모사 결과, 달 반사광의 복사 휘도율은 1차 근사 해석적 방법을 이용한 계산 결과의 복사 휘도율과 측정 오차 범위 이내의 오차를 보였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.71-79
• /
• 2017

A numerical analysis of the liquid-gas two-phase flows has been conducted. The incompressible equations of the two-phase flows were solved by the artificial compressibility method with the CLSVOF interface capturing method. To analyze the grid dependency of CLSVOF, a numerical analysis of Zalesak's disk and three-dimensional liquid deformation problem were carried out, and the reconstruction of deformation was investigated. The Rayleigh-Taylor instability was numerically analyzed by applying the equations of incompressible two-phase flow, and the surface instability was observed.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2034-2036
• /
• 2003

본 논문에서는 21차 상태변수를 갖는 칼만필터 형태의 비행시험용 데이터 융합필터 알고리듬의 성능을 분석하였다. 실측 데이터에 대한 분석을 통하여 상태변수 선택의 적절성을 검증하였다. 공분산 해석기법을 통하여 기 개발된 데이터 융합 알고리듬의 추정값의 오차범위를 구하였다. 수치적인 성능값을 구하고자 간단한 시뮬레이터를 설계하였다. 20회 몬테칼로 시뮬레이션과 공분산 해석결과에 기반하여 필터 계수를 튜닝하였고 이를 기설계된 분산형 칼만필터에 적용하였다. 실시간 소프트웨어 모듈의 수행결과를 동일한 실측데이터를 적용한 후처리 실험결과와 비교하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.3
• /
• pp.6-12
• /
• 1984

The basic binary quantized first-order digital phase locked loop (DPLL) is modified in order to reduce the aquisition time and steadyftate phase error. Adding the loop that corrects the phase difference by detecting the falling zero-crossing time, an effort for the improving the performance is performed and the performance compared with that of the basic DPLL. Using a graphical method, the phase locking processes of the modified DPLL for a phase step and a frequency step input are depicted visually in the absence of noise. The performance of the modified DPLL for a sinusoidal input added narrow band random noise is evaluated using the Chapman-Kolmogorov equation. This approach is verified by direct computer simulation. The steady-state phase error and the average aquisition time of the modified DPLL are compared with those of the basic DPLL, It is shown that the aquisition time of the modified DPLL is shortened about twice, also, as signal to noise ratio increases, the effect of the modification increases and the steady-state phase error approaches to zero.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.11
• /
• pp.1037-1046
• /
• 2013

In this study, the establishment of the criteria for accurate measurement is investigated via a statistical analysis of experimental results. The magnitude of influence on measurement errors is severely affected by the number of paths, mounting angle of sensor, straight pipe length in sequence, and Reynolds number. Three-dimensional numerical analysis has been conducted to understand the flow patterns downstream of a double bent pipe. Numerical analysis shows that the results well agreed with the experimental ones in case of a sensor mounting angle of $0^{\circ}$ and L/D = 3, 5 of $45^{\circ}$, $135^{\circ}$ in a single path. As a result, when the Reynolds number is 700,000-1,400,000, the sensor error of a single-path ultrasonic flowmeter is reduced with the mounting condition of L/D = 3, $45^{\circ}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.131-142
• /
• 1994

This paper analyzes the properties of such algorithm that corresponds to the nonlinear adaptive algorithm with additional update terns, parameterized by the scalar factors ${\alpha}1,\;and\;{\alpha}2$. The analysis of concergence leads to eigenvalues of the transition matrix for the mean filter coefficient vector. Regions in which the algorithm becomes stable are demonstrated. The time constant is derived and the computational complexity of the QFG algorithm is compared with those of the conventional LMS. sign, and LFG algorithm. The properties of convergence in the mean square error is derived and the neccessary condition for the CFG algorithm to be stable is attaned. In the computer simulation a channel equalization is utilized to demonstrate the performance feature of the QFG algorithm. The QFG algorithm has the more computational complexities but the faster convergence speed than LMS and LFG algorithm. Since the QFG algorithm has smoother convergence, it may be useful in case where error bursting is a problem.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1492-1494
• /
• 2015

분산전원 연계기준에 따라 변압기 1차 중성점을 접지운전시 Y-Y-3Limb, $Y-{\Delta}$결선방식은 비대칭 계통전압에 의해 순환전류가 발생된다. 이러한 순환전류는 상별 전류에 영향을 주어 보호계전기 오동작 및 전력량계 오차를 발생시킨다. 따라서 순환전류로 인한 전력계산의 문제를 해결하기 위해 신동파워이론을 만들었다. 본 이론의 핵심은 비대칭 3상 전압과 변압기 결선 및 구조에 의해 발생되는 영상 임피던스(R+jX) 해석을 통해 중성선의 순환전류를 계산하였다. 따라서 정확한 전력계산을 위해 순환전류에 의해 발생되는 상별전류를 보정하는 새로운 이론을 소개 하고자 한다.