DOI QR코드

DOI QR Code

A Numerical Validation for Incompressible Two-phase Flow using CLSVOF and Artificial Compressibility Methods

CLSVOF과 가상압축성 기법을 이용한 비압축성 2상 유동 수치해석 검증 연구

  • Yoo, Young-Lin (School of Aerospace and Mechanical Engineering, Korea Aerospace University) ;
  • Choi, Jeong-Yeol (Department of Aerospace Engineering, Pusan National University) ;
  • Sung, Hong-Gye (School of Aerospace and Mechanical Engineering, Korea Aerospace University)
  • Received : 2017.03.03
  • Accepted : 2017.05.12
  • Published : 2017.10.01

Abstract

A numerical analysis of the liquid-gas two-phase flows has been conducted. The incompressible equations of the two-phase flows were solved by the artificial compressibility method with the CLSVOF interface capturing method. To analyze the grid dependency of CLSVOF, a numerical analysis of Zalesak's disk and three-dimensional liquid deformation problem were carried out, and the reconstruction of deformation was investigated. The Rayleigh-Taylor instability was numerically analyzed by applying the equations of incompressible two-phase flow, and the surface instability was observed.

액체-기체의 2상 유동에 대한 수치해석 기법을 연구하였다. 비압축성 방정식에는 가상 압축성 기법을 적용하였으며 LS와 VOF를 합친 CLSVOF 기법을 적용하여 액체-기체 경계면을 추적하였다. CLSVOF의 격자 의존도를 파악하기 위해 h=1/64, 1/128, 1/128, 그리고 1/160의 격자로 Zalesak's disk 문제와 액체의 3차원 변형 문제의 수치해석을 실시했으며 격자가 최대 보존 오차에 미치는 영향을 조사하였다. 비압축성 2상 유동 방정식을 적용하여 Rayleigh-Taylor 불안정성에 대한 수치해석을 실시하였고 밀도 차에 의한 액체 표면 불안정성이 나타난다는 것을 알 수 있었다.

Keywords

References

  1. Yoo, Y.L., Han, D.H., Hong, J.S. and Sung, H.G., "A large eddy simulation of the breakup and atomization of a liquid jet into a cross turbulent flow at various spray conditions," International Journal of Heat and Mass Transfer, Vol. 112, pp. 97-112, 2017. https://doi.org/10.1016/j.ijheatmasstransfer.2017.04.064
  2. Yoo, Y.L. and Sung, H.G., "Stochastic Model Comparison for the Breakup and Atomization of a Liquid Jet using LES," Journal of The Korean Society for Aeronautical and Space Sciences, Vol. 45, No. 6, pp. 447-454, 2017. https://doi.org/10.5139/JKSAS.2017.45.6.447
  3. Hirt, C.W. and Nichols, B.D., "Volume of Fluid (VOF) Method for the Dynamics of Free Boundaries," Journal of Computational Physics, Vol. 39, pp. 201-225, 1981. https://doi.org/10.1016/0021-9991(81)90145-5
  4. Sussman, M., Smereka, P. and Osher, S., "A Level Set Approach for Computing Solutions to Incompressible Two-Phase Flow," Journal of Computational Physics, Vol. 114, pp. 146-159, 1994. https://doi.org/10.1006/jcph.1994.1155
  5. Luo, K., Shao, C., Yang, Y. and Fan, J., "A mass conserving level set method for detailed numerical simulation of liquid atomization," Journal of Computational Physics, Vol. 298, pp. 495-519, 2015. https://doi.org/10.1016/j.jcp.2015.06.009
  6. Enright, D., Fedkiw, R., Ferziger, J. and Mitchell, I., "A hybrid particle level set method for improved interface capturing," Journal of Computational Physics, Vol. 183, No. 1, pp. 83-116, 2002. https://doi.org/10.1006/jcph.2002.7166
  7. Baraldi, A., Dodd, M.S. and Ferrante, A., "A mass-conserving volume-of-fluid method: volume tracking and droplet surface-tension in incompressible isotropic turbulence," Computers & Fluids, Vol. 96, pp. 322-337, 2014. https://doi.org/10.1016/j.compfluid.2013.12.018
  8. Bourlioux, A., "A Coupled Level-Set Volume-of-Fluid Algorithm for Tracking Material Interfaces," Proc. 6th Int. Symp. on Computational Fluid Dynamics, Lake Tahoe, C.A., U.S.A., pp. 15-22, Sep. 1995.
  9. Wang, Z., Yang, J., Koo, B. and F. Stern, "A coupled level set and volume-of-fluid method for sharp interface simulation of plunging breaking waves," International Journal of Multiphase Flow, Vol. 35, Issue 3, pp. 227-246, 2009. https://doi.org/10.1016/j.ijmultiphaseflow.2008.11.004
  10. Griebel, M. and Klitz, M., "CLSVOF as a fast and mass-conserving extension of the level-set method for the simulation of two-phase flow problems," Numerical Heat Transfer, Part B: Fundamentals, Vol. 72, pp. 1-36, 2017.
  11. Klitz, M., "Numerical Simulation of Droplets with Dynamic Contact Angles," Ph.D Thesis. Department of of Mathematics and Natural Sciences, Rheinische Friedrich-Wilhelms-Universitat, Bonn, Germany, 2014.
  12. Li, Q., "Numerical simulation of melt filling process in complex mold cavity with insets using IB-CLSVOF method," Computers & Fluids, Vol. 132, pp. 94-105, 2016. https://doi.org/10.1016/j.compfluid.2016.04.005
  13. Wang, Z., Yang, J. and Stern, F., "Comparison of particle level set and CLSVOF methods for interfacial flows," 46th AIAA Aerospace Sciences Meeting and Exhibit, Reno, N.V., U.S.A., AIAA 2008-530, Jan. 2008.
  14. Li, Q, Quyang, J., Yang, B. and Li, X., "Numerical simulation of gas-assisted injection molding using CLSVOF method," Applied Mathematical Modelling, Vol. 36, No. 5, pp. 2262-2274, 2012. https://doi.org/10.1016/j.apm.2011.08.023
  15. Chorin, A.J., "A numerical method for solving incompressible viscous flow problems," Journal of Computational Physics, Vol. 135, No. 2, pp. 118-125, 1997. https://doi.org/10.1006/jcph.1997.5716
  16. Youngs, D., "Time-dependent multi-material flow with large fluid distortion," Numerical Methods Fluid Dynamic, Vol. 1, No. 1, pp. 41-51, 1982.
  17. Son, G., "Efficient implementation of a coupled level-set and volume-of-fluid method for three-dimensional incompressible two-phase flows," Numerical Heat Transfer: Part B: Fundamentals, Vol. 43, No. 6, pp. 549-565, 2003. https://doi.org/10.1080/713836317
  18. Jiang, G.S. and Shu, C.W., "Efficient implementation of weighted ENO schemes," Journal of Computational Physics, Vol. 126, No. 1, pp. 202-228, 1996. https://doi.org/10.1006/jcph.1996.0130
  19. Edwards, J., "Towards unified CFD simulations of real fluid flows," In 15th AIAA Computational Fluid Dynamics Conference, Anaheim, C.A., U.S.A., pp. 2524, Jun. 2001.
  20. Zalesak, S.T., "Fully multidimensional flux-corrected transport algorithms for fluids," J. Comput. Phys., Vol. 31, No. 3, pp. 335-362, 1979. https://doi.org/10.1016/0021-9991(79)90051-2
  21. Chandrasekhar, S., Hydrodynamic and Hydromagnetic Stability, Clarendon Press, Oxford, U.K., 1961.