• Journal of Auto-vehicle Safety Association
• /
• v.14 no.1
• /
• pp.62-67
• /
• 2022

This study is to construct the simple estimating model for the HIC15 of the driver dummy using the frontal impact test results. Test results of 9 vehicles of Hyundai Sonata from the MY2002~MY2020 USNCAP are utilized for constructing the linear regression model. The average accelerations extracted from the vehicle crash pulses are handled as the main factors. The average accelerations of 10 ms interval within 0~100 ms are calculated from the crash pulse data of 9 vehicles. The present estimating model of the HIC15 using the average accelerations of 10 ms interval in the 0~80 ms range shows good agreement with the tested value within 2.4% maximum error.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.76-82
• /
• 2005

In this paper, validation of Driver Steering Model has been conducted. The comparison between the simulation model and vehicle test results shows that the model is very feasible for describing combined human driver and actual vehicle dynamic behaviors. The 3D vehicle model is consisted of 6-DOF sprung mass and 4-quarter car model for vehicle body dynamics. Powertrain model including differential gear and Pacejka tire model are applied. The driver steering model is also validated with vehicle test result. The driver steering model is based on angle and displacement error from the desired path, recognized by driver.

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.3
• /
• pp.1-8
• /
• 1984

한국에 이륜차가 소개된 것은 일차 경제개발 5개년계획이 시작된 1962년부터이며 초기 기아산 업에서 차체일부를 제외한 KD부품을 일본 본전기연으로부터 수입하여 조립 생산하였으며, 1975년 6월까지 약 14년간 총 93,000대를 생산한 후 1975년 7월부터 기아기연이 별도 법인으로 설립되면서부터 본격적으로 생산이 증가하게 되었고 1979년까지 독점 공급하게 되어 당시 년산 10만대를 돌파하게 되었다. 이때부터 국내 여러 업체가 출현하여 경합시대에 들어갔다. 즉, 1979년 한국 제네랄모페드(GMK)에서 이태리 Minarelli로부터 엔진 23,700대를 도입 유럽풍의 모페드(Moped)를 조립 생산하기 시작하였으나 1983년부터는 생산이 중단되었다. 1980년대는 대 림공업과 효선기계에서 각각 이륜차를 생산하기 시작하였다. 대림공업은 일본 "호다까"로부터 설비 및 기술을 도입하였으며, 효성기계 역시 일본 "스즈끼"로부터 기술을 도입하였다. 같은 해 진주 소재 동야정기에서는 서독으로부터 Sachs 엔진 6,600대를 도입하여 모페드(Crown)를 생산 판매하였으나 1982년부터 생산을 중단하였다. 다음 해인 1981년 마신산업은 이태리 피아지 오(Piaggio)로부터 엔진을 도입하여 125cc 급스쿠터를 생산하기 시작하였다. 1980년도에는 5개 업체가 이륜차 생산에 참가하였으나 자연소멸되고 또 81년 2월 28일 자동차산업 합리화조치로 대림공업과 기아기연이 합병되어 대림자동차공업(주)가 1982년 4월 설립됨으로써 현재는 효성 기계, 마신산업과 함께 3개업체가 존재하고 있다. 1975년에는 불과 3개 모델뿐이던 것이 79년 에는 5개 모델, 지금은 30개의 모델을 3개 업체에서 생산하고 있으며 그 동안 없어진 모델이 18개기종이 된다.

• International Commerce and Information Review
• /
• v.16 no.3
• /
• pp.73-96
• /
• 2014

The purpose of this research is to evaluate a short-term export demand forecasting model reflecting individual passenger vehicle brands and market characteristics by using Vector Autoregressive (VAR) models that are based on multivariate time-series model. The short-term export demand forecasting model was created by discerning theoretical potential factors that affect the short-term export demand of individual passenger vehicle brands. Quarterly short-term export demand forecasting model for two Korean small vehicle brands (Accent and Avante) were created by using VAR model. Predictive value at t+1 quarter calculated with the forecasting models for each passenger vehicle brand and the actual amount of sales were compared and evaluated by altering subject period by one quarter. As a result, RMSE % of Accent and Avante was 4.3% and 20.0% respectively. They amount to 3.9 days for Accent and 18.4 days for Avante when calculated per daily sales amount. This shows that the short-term export demand forecasting model of this research is highly usable in terms of prediction and consistency.

• Journal of the Korea Convergence Society
• /
• v.10 no.10
• /
• pp.99-105
• /
• 2019

In this study, the flow analysis around vehicle was carried out on various kinds of roof box models installed at the roof of vehicle. Through the analysis of fluid flow and pressure, we investigated which model was more suitable for driving. The four types of models were designed with their respective shapes of models 1, ${\beta}$, ${\delta}$ and ${\gamma}$, and the driving speed of car was set as 20 m/s. It was confirmed that the pressure for model ${\beta}$ became greatest compared to other models. And model ${\delta}$ has the lowest pressure among all models of roof boxes by installing a canoe with the structure for cable type. As the design data with the durability of roof box obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the car body at real life.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.4
• /
• pp.167-176
• /
• 2017

There are increasing policies and safeguards to prevent various human resource losses with the development of automotive industry. Currently ISO26262 $1^{st}$ edition has been released in 2011 to ensure functional safety of electrical and electronic systems and the $2^{nd}$ edition will be released in the second half of 2016 as part of a trend. The E/E (Electrical & Electronics) system requirements verification is required through walk-through, 인스펙션, semi-formal verification and formal verification in ISO 26262. This paper describe the efficiency of model checking for the E/E system requirements verification by applying the product development project of ASIL (Automotive Safety Integrity Level) D for the electrical parking brake system.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.16-29
• /
• 2011

The Korea auto industry has developed remarkedly over the past 40 years and ranked up to 5th vehicles production nation in the world. In 2009 alone, Korea produced 3.5million vehicles and number of vehicles registered surpassed the seventeen million. On the other hand, 711 thousand ELV(End of Life Vehicles) were scrapped and used cars more than 265 thousand were exported. In the year 2009, 568 thousand tons of iron, 46 thousand tons of aluminum and 7 thousand tons of copper were recovered from ELV in Korea. Recycling ratio of ELV is approaching 95% by using ASR(Automobile Shredding Residue) as a fuel at cement kiln. Korea has enacted the automobile recycling law in 2007 and enforced it from January 2009, actually. However, the law has not been managed smoothly due to delays in the construction of infrastructure and the existence of a hostile monitoring system. In this regard, a revision and supplement program focused on recycling fee on the automobile recycling law is running under the ministry of environment now. Here, a recycling model for enhancing ELV recycling is suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1022-1026
• /
• 2013

Recently, the waste heat recovery technique using thermoelectric generator (TEG) in automotive engine has emerged to improve thermal efficiency in commercial vehicle. It is not difficult to recognize the numerous attempts that have been made to develop the TEG simulation model, but it is hard to find the model in conjunction with a particular heat engine system. In this study, 1-D commercial software AMESim was used to develop a computational model that can assess waste heat recovery from a diesel engine exhaust using TEG. The developed TEG simulation model can be used for evaluating the TEG performance of various types of TE module, and the diesel engine model can simulate any type of on and off-road diesel engines. The simulation results demonstrated that approximately 544.75W could be recovered from the engine exhaust and 40.4W could be directly converted into electricity using one TE module. The models developed in this study can be easily coupled with each other in the same computational program; thus, the models are expected to provide a viable tool for developing and optimizing a TEG waste heat recovery system in an automotive diesel engine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4707-4712
• /
• 2014

Considerable fuel in cars is consumed by air resistance. The flow resistance against the air stream was analyzed by flow analysis near the passenger car body. In this study, the models were used were cars available on the real market. Two velocities entered into inlet plane of flow were 80 km/h and 110 km/h using the flow analysis of CFX. As the study method, the velocity of air flow near the car and the pressure on the rear part of car body were investigated at the driving of car. The shapes of the study models were models 1 and 2, and the flow streams were four cases of 1, 2, 3, and 4. In case 1 among the four cases, the maximum pressure ($1.017{\times}10^5Pa$) on the rear part was highest and the maximum velocity (43.81m/s) of air flow near car body was fastest. The air drag force in the case of high speed (110km/h) driving a passenger car was higher than that of a normal driving speed (80km/h). The drag force at wide section area of the car body becomes higher than the narrow section area. The shape of the car body can be effectively designed to reduce the air resistance using the study results of this analysis.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.195-206
• /
• 1997

In this study, a simulation tool is developed in order to investigate non steadystate cornering performance of 4WD/4WS vehicles. The 4WD/4WS vehicles are modeled as a 8-th order dynamic system which includes complex non-linear vehicle dynamics and tire models. The vehicle models are constructed into a modulated simulation tool and are utilized for analyzing cornering performance such as combined braking and steering, cornering on the icy read and $\mu$-split braking, The whole analysis is done with the simulation tool which consists of a number of subsystems and offers graphic environment. Simulation results show that this tool is useful and cost-effective in the dynamic analysis of the combustion-engine vehicles as well as electrically driven vehicles.