Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지

Validation of Driver Steering Model with Vehicle Test

실차 실험을 통한 운전자 조향 모델의 검증

  • Chung Taeyoung (Department of Automotive Engineering, Hanyang University) ;
  • Lee Gunbok (School of Mechanical Engineering, Soongsil University) ;
  • Yi Kyongsu (School of Mechanical Engineering, Hanyang University)
  • Published : 2005.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, validation of Driver Steering Model has been conducted. The comparison between the simulation model and vehicle test results shows that the model is very feasible for describing combined human driver and actual vehicle dynamic behaviors. The 3D vehicle model is consisted of 6-DOF sprung mass and 4-quarter car model for vehicle body dynamics. Powertrain model including differential gear and Pacejka tire model are applied. The driver steering model is also validated with vehicle test result. The driver steering model is based on angle and displacement error from the desired path, recognized by driver.

Keywords

References

  1. E. Bakker, H. B. Pacejka and L. Linder, 'A New Tire Model with an Application in Vehicle Dynamics Studies,' SAE Transactions, Journal of Passenger Cars, Vol.98, No.890087, 1998
  2. C. Lee, S. Lee and K. Yi, 'Differential Gear Model and Its Influence on Vehicle Dynamics,' 1999 KSAE Fall Conference Proceeding, Vol.II, pp.446-451, 1999
  3. R. A. Hess and A. Modjtahedzadeh, 'A Control Theoretic Model of Driver Steering Behavior,' IEEE Control Systems Magazine, August, pp.3-8, 1990
  4. R. A. Hess, 'Analyzing Manipulator Characteristics in the Closed-loop Pilot/Vehicle System,' Systems, Man and Cybernetics, Conference Proceedings, IEEE International Conference on International Conference on, 4-7 Nov., pp.533-535, 1990
  5. K. Yi, H. J. Yoon and K. Huh, 'Implementation and Vehicle Tests of a Vehicle Stop-and-Go Cruise Control System,' Proceedings of the Institution of Mechanical Engineers, Journal of Automobile Engineering, Vol.216, Part D, pp.537-544, 2000