• Journal of Ocean Engineering and Technology
• /
• v.29 no.5
• /
• pp.398-403
• /
• 2015

This paper introduces a method to estimate the contact-force of the leg of a walking robot and proposes a solution to a shortcoming of the previous study. This shortcoming was the deteriorating performance when estimating the contact-force whenever the rotation of each joint was reversed. It occurred because the friction-torque of each joint was not considered. In order to solve this problem, a friction-torque model for a robot leg was developed based on repetitive experimentation and used to improve the contact-force estimation performance. We verified the performance of the proposed method experimentally.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.819-826
• /
• 2022

Recently, interest in smart port systems for linking with autonomous ships is increasing. To build a smart port system, primarily, a system that can automatically moor a vessel is required. To calculate the allowable mooring capacity of the automatic mooring system in a port, the characteristics of the vessel must be considered, and the external force generated from environmental disturbances in the sea must be accurately calculated. Accurately estimating the magnitude of these environmental disturbances is an extremely important factor for designing an automatic mooring system. In this study, the mooring capacity of the HANBADA was estimated according to the port and fishing port design criteria of the Ministry of Ocean and Fisheries. The longitudinal and lateral forces of the mooring force acting on the HANBADA were 18 kN and 248 kN, respectively, under the most extreme ocean conditions (BF 6).

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.613-618
• /
• 2012

For the tug-barge simulation, captive model test(Horizontal Planar Motion Mechanism) of the barge model is carried out. From the result of HPMM test, a resistance coefficient, maneuvering coefficients of the barge are obtained. A mathmatical model of the barge is validated by turning simulations with different angle of towing line applied a simple towing line model and the tactical diameter compared to sea trial data. As a result, the tactical diameter of the barge is smaller as the angle of towing line is bigger. The tactical diameter from simulations is smaller than that from sea trial data, may be caused by increased displacement of the barge.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.349-350
• /
• 2010

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.4
• /
• pp.386-392
• /
• 1988

In this paper, we suggest a modified Gradient method for the identification of plant parameter. And also, through this new identification method, a direct adaptive control theory is proposed for a single-input single-output discrete system. Direct adaptive control theory proposed in this papar ensures global stability and the results of compute simulation show that the proposed algorithm can be applied to both stable and unstable plant.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.27-30
• /
• 2000

In this paper, we propose a new approach to determination of environment forces acting on a rigid body. To estimate the output of disturbance observer due to internal torque, the disturbance observer output estimator using functional link neural network (FLANN) is designed. It is also shown by simulation results that the precise estimation of contact force is achieved for a 2-link SCARA robot performing position/force control.

• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.167-176
• /
• 2008

Recently, lots of studies are performed in developing of active orthosis. Exact and simple muscle force estimation is important in developing orthosis which assists muscle force for disabled people or physical laborers. Hill-type muscle model dynamics is common method for estimation of muscle forces. In Hill-type muscle model, we must know muscle length and moment arm which largely affect muscle force. And several methods are proposed to estimate muscle length and moment arm using joint angle. In this study, we compared estimation results of those method with data from body model of opensim to find which method is exact for estimation of muscle length and moment arm.

• Journal of Power System Engineering
• /
• v.15 no.4
• /
• pp.65-74
• /
• 2011

이 논문은 비선형 시스템에 대해 bilinear 강인제어기를 설계하는 새로운 방법을 제시한다. 이 설계방법은 골칫거리인 비선형 영향을 나타내는 무거운 질량을 가지고 진동하는 시스템을 제어하기 위한 새로운 대안이고 진전된 방법이다. 이 설계 과정에, hydrostatic 구동기로 구동되는 킬(용골)이 주어진다. 첫 단계로 킬은 물리적으로 여러 한정된 질량으로 모델화된다. 물리적 모델에 근거한 수학적인 모델을 유도하는 방법은 해밀턴 원리를 적용한 유한요소법을 사용하였다. 즉, 수학적 모델은 여러 서브시스템으로 구성된다. 이것은 주어진 물리적인 시스템에 대해 기준이 되는 시스템이다. 회전하는 구동기에 대한 물리적 모델에 근거하여, 과도 거동은 구동기의 베어링에서 측정되는 운동 현상으로부터 유도된다. 물리적인 시스템은 bilinear 시스템으로 구성하였다. 이 시스템에 근거하여, 요트 킬의 거동을 제어하도록 bilinear 관측기를 설계한다. 구동기의 속도, 토크, 밸브에서의 유량 등이 관측기를 구성하는데 필요한 데이터들이다. 시뮬레이션 결과에 의하면 비선형성에 대한 추정과 보상을 통하여 무거운 질량을 갖는 회전축에 대한 위치와 힘을 제어하는 설계에 유용한 접근법임이 증명되었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.842-847
• /
• 2002

One of the challenging problems with bicycle simulators is to deal with the inherent unstable bicycle dynamics that is coupled with rider's motion. For the bicycle dynamics calculation and the real time simulation, it is necessary to identify the control inputs from the rider as well as the virtual environments. The six control forces of the Stewart platform-based motion system are used for estimation of the rider's action force, which is one of the important control inputs, but of which the direct measurement is impractical. For the effective estimation of the rider's action force, the dynamics model of the motion system is derived incorporated with both analytical and experimental methods and the sliding mode controller with perturbation estimation is developed.

• Composites Research
• /
• v.34 no.6
• /
• pp.350-356
• /
• 2021

When a ship with a planing line operates or turns in a straight line, the floating position and trim change according to the speed, and a large resistance is generated on the hull. In this paper, the resistance to a planing line was estimated through the computational fluid dynamics of a leisure boat with improved hull weight and durability by applying a carbon composite material to the hull. The resistance performance of the bow and stern of the 18ft class leisure boat was checked and the flow field of the entire vessel was estimated, and the stability of the planing line was confirmed by comparing the resistance of each trim through numerical analysis. In addition, it was confirmed that the designed planing line could withstand it sufficiently because the force applied to the hull was not large, and The stability of the boat was analyzed by calculating the wavelength of the wave and the length of the ship as the ratio of gravity to the inertial force and checking how much force the rolling occurred.