Browse > Article
http://dx.doi.org/10.7837/kosomes.2022.28.5.819

A Study on the Estimation of Mooring Force of the T/S HANBADA  

Seo, Dae-Won (Dept. of Naval Architecture and Ocean Engineering, Kunsan National University)
Oh, Jungkeun (Dept. of Naval Architecture and Ocean Engineering, Kunsan National University)
Publication Information
Journal of the Korean Society of Marine Environment & Safety / v.28, no.5, 2022 , pp. 819-826 More about this Journal
Abstract
Recently, interest in smart port systems for linking with autonomous ships is increasing. To build a smart port system, primarily, a system that can automatically moor a vessel is required. To calculate the allowable mooring capacity of the automatic mooring system in a port, the characteristics of the vessel must be considered, and the external force generated from environmental disturbances in the sea must be accurately calculated. Accurately estimating the magnitude of these environmental disturbances is an extremely important factor for designing an automatic mooring system. In this study, the mooring capacity of the HANBADA was estimated according to the port and fishing port design criteria of the Ministry of Ocean and Fisheries. The longitudinal and lateral forces of the mooring force acting on the HANBADA were 18 kN and 248 kN, respectively, under the most extreme ocean conditions (BF 6).
Keywords
T/S HANBADA; Automatic mooring system; Mooring force; Port and fishing port design criteria; Smart port system;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Kim, S.(2020), A Study on the Improvement of Mooring System of New Training Ship 'HANNARA', Master's Thesis, Korea Maritime and Ocean University.
2 Cho, I. S.(2017), Behavior Analysis and Control of a Moored Training Ship in an Exclusive Wharf, Journal of the Korean Society of Marine Environment & Safety, Vol. 23, No. 2, pp. 139-145   DOI
3 Jung, C. Y., H. K. Lee, and G. Y. Kong(2008), A study on the Ship's Performance of T.S. HANBADA(III), Journal of Navigation and Port Research, Vol. 32, No. 6, pp. 439-445.   DOI
4 Kim, H. H., J. M. Kim, and T. Nam(2019), Design of sliding mode control system for automatic mooring devices for vessels, Journal of Advanced Marine Engineering and Technology, Vol. 43, No. 9, pp. 717-726.   DOI
5 Kim, Y. Y., K. J. Choi, H. Chung, S. Han, and P. S. Lee(2014), A ship-to-ship automatic docking system for ocean cargo transfer, Journal of Marine Science and Technology, Vol. 19, No. 4, pp. 360-375.   DOI
6 Lee, T. W.(2020), Smart Policy Trend of Europe and Singapore and Its Political Implications, Journal of Korea Port Economic Association, Vol. 36, No. 1, pp. 77-90.   DOI
7 Lee, Y. S., T. G. Jeong, C. H. Jung, and S. W. Kim(2010), Conceptual Design for Mooring Stability System and Equipments of Mobile Harbor, Journal of Navigation and Port Research, Vol. 34, No. 5, pp. 311-317.   DOI
8 Ministry of Ocean and Fisheris(2014), Port and fishing port design criteria, 111-1192000-000184-14.
9 Son, Y., M. S. Kim, H. Jang, S. Kim, and Y. Kim(2022), Study on Temperature-Dependent Mechanical Properties of Chloroprene Rubber for Finite Element Analysis of Rubber Seal in an Automatic Mooring System, Journal of the Society of Naval Architects of Korea, Vol. 56, No. 3, pp. 157-163.
10 Yu, Y.(2017), A Study on Performance and Maintenance Standards of Mooring bollards, Master's thesis, Korea Maritime and Ocean University
11 Raul, V. C., C. Juan Carlos, F. Jose Angle, L. Mario, and C. Luis(2018), A Review of Ship Mooring System, Brodogradnja, Vol. 69, No. 1, pp. 123-149.   DOI
12 ISO 15016(2016), Ships and marine technology - Guidelines for the assessment of speed and power performance by analysis of speed trial data.
13 Lee, Y. S.(2007), A Study on the Effect of Wind Force and Moment Acting on T/S HANNARA, The Journal of Navigation and Port Research, Vol. 31, No. 3, pp. 223-228.   DOI