• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2027-2029
• /
• 2008

옥외용 고전압 절연물의 절연성능은 표면저항과 밀접한 관계를 가지며, 이는 절연물 표면에 존재하는 수분의 거동에 의해 민감하게 반응하게 된다. 또한 절연물 표면에 흡착된 수분의 존재로 인해 절연물과 수분, 공기층의 유전율 차이로 인해 경계면에서의 전기력선속과 공간전하밀도의 변화가 급격해지므로 불평등전계를 형성할 우려가 있다. 따라서 본 논문에서는 옥외용 고전압 절연물의 표면에 작은 물방울 형태로 존재하게 되는 흡착수분에 의한 전계분포를 확인하기 위해 FEM을 이용하여 전산해석을 수행하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.316-318
• /
• 2008

본 논문은 왕겨, 호두각 등의 원료를 대상으로 수산화카륨등으로 활성화시키므로써 높은 비표면적과 세공율을 갖는 활성탄을 제조하고, 제조된 활성탄을 이용하여 이산화탄소 흡착능을 연구하였다. 최근 높은 비표면적과 세공부피를 갖는 활성탄에 대한 연구는 매우활발히 일어나고 있으며, 수소, 메탄 등의 저장과 이산화탄소 분리공정의 적용성을 위한 연구가 활발히 수행되고 있다. 제조된 활성탄의 표면개질을 통한 이산화탄소의 흡착능의 증대와 탈착효율의 증대를 위하여 각종 금속염이 미치는 영향을 연구하였다. 금속염의 종류와 처리량 및 아민등의 유기물에 의한 변화를 고찰하였다.

• Journal of Wetlands Research
• /
• v.17 no.2
• /
• pp.146-154
• /
• 2015

Domestic railway industry has grown in numbers, scale of railway ndustrial and operation because was focused on an environmentally sustainable transportation. However, it is not enough to treat and prevent heavy metals which occur as the railway operation increases. The heavy metals occurred when the operating railway and it will be flow into water system with rainfall effluent during rainfall. will flow out along with the rainfall effluent when rainfall comes. In case of a railway bridge, In particular, heavy metals were flow into the water system without any treatment from railway bridges where located nearby rivers and lakes. So, rainfall effluent from railway facilities was occurred pollution of water system. For the prevent of heavy metal runoff during rainfall, the adsorptivity of material in railway roadbed is important.In this study, adsorptivity of gravel which is main gravel and blast-furnace slag were conducted adsorption test and deducted Freundlich's and Langmuir's isothermal adsorption equations. Safety as railway subbase course material was evaluated using modeling. As a result, absorption amount of slag, Cd and Cu, was shown higher than gravel and Pb along with Zn showed higher absorption amount of gravel. However, absorption amount of slag was shown higher than gravel used as railway subbase course material as time passes by. Absorption features had more suitable determination coefficient of heavy metals in warm absorption type such as Langnmuir compared to warm absorption type like Freundlich. To add, they showed less transformation by about 10% compared to gravel in safety evaluation through modeling. This is a railway subbase course material that prevents water outflow of heavy metal thus we can know slag is needed to be used.

• Journal of Life Science
• /
• v.13 no.4
• /
• pp.421-427
• /
• 2003

A natural habit at bacterium, Enterobacter intermedious KH410 was isolated from freshwater plant root and identified. Adsorption of heavy metals such as lead, cadmium, and copper by this strain was examined. The minimal inhibitory concentrations(MIC) for each metal were 1.78 mM for lead, 0.17 mM for cadmium and 1.39 mM for lopper, respectively. Maximum production of dried cell was 2.56 g/$\ell$ in LB medium containing 0.5% NaCl, 1% yeast extract and 1% of lactose. Optimal conditions for adsorption were 0.6 dry g-biomass, at pH 4.0 and the temperature of $20^{\circ}C$. Adsorption equilibrium reached maximum after 30 min in 400 mg/$\ell$ metal solution. The adsorption capacity (K) of copper was 1.5 times higher than that of cadmium and lead was 1.1 times higher than that of cadmium. from the results obtained in this study, Freundlich adsorption model was applicable for all metals. Adsorption strength (1/n) of heavy metal ions were in the order of cadmium>copper>lead. The adsorption of dried cell for lead, cadmium, and copper was 56.2, 58.0, 55.8 mg/g-biomass, respectively. Pretreatment to increase ion strength was the most effective with 0.1 M NaOH whereas slight difference was found both KOH and $CaCl_2$ upon same concentration. Effective desorption was induced by 0.1 M EDTA for lead and 0.1 M $HNO_2$ for cadmium and copper.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1105-1112
• /
• 2009

Antibiotics are biologically active substances and commonly used for therapeutic treatment of infectious disease in humans and for treating and protecting the health of animals. In recent years, antibiotics have attracted worldwide attention because of their side effects on the environment. Consequently, efforts have been made to monitor the residual of antibiotics in the environment. This study tested the mobility of tetracyclines and sulfonamides in soil and leachate through column experiments. The three tetracycline antibiotics showed higher mass recovery rates in all kinds of soils(28.00~44.11%) than in leachate(10.54~27.43%). This seems attributable to the high adsorption coefficient values($K_d$) of tetracyclines representing strong and active adsorbability to organic and mineral phases in soil, ending up relatively small amount being detected in surface water. By contrast, the sulfonamides(sulfamethazine and sulfathiazole) showed higher mass recovery rates in leachate(23.19~26.20%) compared to in soil(10.41~14.21%) due to lower adsorption coefficient values and higher mobility of sulfonamides, enabling easier movement to surface water through the runoff in the environment.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.27-35
• /
• 2010

To evaluate the basic characteristics and adsorption properties of commercial wood charcoal, we investigated the proximate analysis, porosimetry analysis, methylene blue adsorption, removal ratios of formaldehyde, and removal ratio of ethylene gas. Fixed carbon contents of traditional black and white charcoal, and mechanical charcoal were 51.8~76.6%, 72.9~84.6%, and 48.5~80.3%, respectively. Refining degrees of the most traditional black charcoal were 9, and those of white charcoal and mechanical charcoals were zero. Specific surface area of traditional black charcoal was 0.1~13.7 $m^2/g$, which was quite lower than that of white charcoal (53.2~372.6 $m^2/g$) and mechanical charcoals (224.3~464.6 $m^2/g$). Also, amounts of methylene blue adsorption were quite lower in black charcoal (0.53~1.97 mg/g) compared with white charcoal (2.68~7.68 mg/g) and mechanical charcoal (11.63~26.10 mg/g). Removal ratios of formaldehyde of the black charcoal were 11.4~26.7%, which is quite similar to white charcoal (17.9~34.9%) and mechanical charcoal (5.5~25.8%). Removal ratios of ethylene gas for traditional black charcoal, traditional white charcoal, and mechanical charcoal were 2.2~43.5%, 21.7~39.1%, 21.7~39.1%, respectively. There was no significant difference in the removal ratios of formaldehyde and ethylene gas among traditional black charcoal, traditional white charcoal, and mechanical charcoal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.2027-2036
• /
• 2013

Comparison of removal performance between reverse osmosis(RO), nanofiltration(NF), electrocoagulation(EC) and electroadsorption(EA) for removal of nitrate and fluoride often exceeded the limits of water quality in small water treatment plants. Removals of nitrate and fluoride were 72-92% and 74-85% in RO, 5-15% and 1% in NF, 99% and 44% in EA equipped with MWCNT coated electrodes, 82% and 77% in EA equipped with Cu-MWCNT electrodes, and 11-46% and 69-99% in EC. Consequently, high removals of both ions were anticipated in RO. Effective removal of both ions are possible for EC, but great production of sludge is a big burden. EA equipped with the MWCNT electrodes showed a great fluctuation in removal efficiency, and electrode stability should be upgraded.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.261-270
• /
• 2013

Purpose: Adsorption properties of lysozyme and albumin according to physiochemical properties of commercial contact lens classified with the FDA categories and a contact lens fabricated in the laboratory were investigated. Methods: The contact lens were prepared using HEMA(2-hydroxyethyl methacrylate) and TRIM(3-(trimethoxysilyl) propyl methacrylate) in a cast mold. Artificial tears containing lysozyme and albumin were prepared. We measured the amounts of protein adsorbed on the each lenses with varying adsorbed time (48 hour) and the pH range (6, 6.8, 7.4, 8.2, 9) of artificial tear. Amount of the proteins absorbed on the contact lenses were measured by using HPLC. Results: Time to reach the equilibrium of protein adsorption for silicone hydrogel lens was taken longer than hydrogel lens. The amount of adsorbed both lysozyme and albumin at equilibrium were greater for the hydrogel lens than the silicone hydrogel lens, and larger for the ionic lens than the non-ionic lens. Lysozyme was more adsorbed on the higher water content of contact lens, whereas albumin was more adsorbed on the lower water content of contact lens. Only lysozyme was adsorbed on the Group IV hydrogel lens of ionic higher water content. The adsorption of protein on contact lens increased with pH of artificial tears as close to the isoelectric point of each protein. Conclusions: The adsorption amount of lysozyme is more affected by the ionic strength of the contact lens surface than the water content of contact lens. Albumin adsorption is more affected by water content than the ionic strength of the contact lens surface. For the adsorption of proteins on the silicone hydrogel lens, the pore size, determined both by the number of Si atoms and the chemical structure of the silicone-containing monomers, as well as the polarity of contact lens should be also considered.

• Microbiology and Biotechnology Letters
• /
• v.41 no.4
• /
• pp.456-461
• /
• 2013

Using the different adsorption properties of ssDNA and dsDNA to GO, this study used a real time and efficient fluorescence assay to detect the enzymatic activity of the Klenow fragment with the adsorbed DNA to GO. Results showed that adsorption of fluorescein-tagged ssDNA to GO resulted in fluorescence quenching and DNA was released from GO by adding complementary DNA. In addition, fluorescence restoration was increased through a polymerization reaction by the Klenow fragment in the presence of a fluorescein-attached template, GO, and primer. Gel electrophoresis was conducted to confirm the hybridization and DNA polymerization reactions on GO.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.174-181
• /
• 2000

The ACF/PP-g-AN copolymers were synthesized by the irradiational grafting of acrylonitrile onto ACF/PP hybrid fabric. The synthesis of the ACF/PP-g-AN copolymer was evidenced by the band of -C=N absorption peak at 2250 $cm^{-1}$ / and amidoximation was evidenced by the band of -OH and -NH$_2$ peak at 3450 $cm^{-1}$ / on FT-IR spectrum. The optimal time for the uranium ion adsorption equilibrium on ACF/PP-g-AN copolymers was 8 days and the optimal pH was 8. The adsorption capacities of ACF/PP-g-AN copolymers increased according to the content of amidoxime and were not varied even after more than 10 times of regeneration.