• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.2
• /
• pp.208-213
• /
• 2012

In this paper, the radial error of a rotary table at five-axis machine tool is evaluated by utilizing ISO 230-2 and estimation method using double ball-bar. The geometric error of a rotary table is defined as position dependent geometric errors or position independent geometric errors according to their physical character. Then estimation method of geometric errors using double ball-bar is simply summarized including measurement path, parametric modeling and least squares approach. To estimate representative radial error, offset error, set-up error which affect to the double ball-bar data, mean value of measured data including CCW/CW-direction are used at estimation process. Radial errors are separated from measured data and used for evaluation with ISO 230-2. Finally, suggested evaluation method is applied to a rotary table at five-axis machine tool and its result is analyzed to improve the accuracy of the rotary table.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.7
• /
• pp.749-753
• /
• 2013

Hydraulic systems are used to transform mechanical energy and fluid energy into each other. Its applications are very wide over the whole industries such as automobiles, public works, rockets, machine tools, construction heavy equipments, airplaces and so on. They are hydraulic pumps that transform energy in the systems. In this study, with basic operation principles as a start point, I tried to understand how the rotating radius of a piston affects the lubrication characteristics in more practical conditions, a swash-plate with tilt angle zero capable of rotating motion and other devices was used. In this paper, a slipper was located on 45mm eccentricity from the center of a swash-plate. As a result, through this experiment, it was found that the rotating radius of a piston affects load capacity, leakage flow and lubrication characteristics and it is one of the important parts for improving the pump efficiency.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.3
• /
• pp.207-214
• /
• 2015

The preliminary design of a radial inflow turbine using R134a as the working fluid at 5 kW of power for application to ocean thermal energy conversion (OTEC) is performed to obtain the trends for the efficiency and geometrical dimensions of the turbine. Using input conditions that included a turbine inlet temperature of $25^{\circ}C$, an outlet static pressure of 4.9 bar, and a mass flow rate of 1.16 kg/s, the results of a mean flow analysis show the major dimensions of the turbine, along with an angular velocity of 12,820 rpm. Based on these results, a three-dimensional turbine model is constructed for a computational fluid dynamics (CFD) analysis. The flow characteristics inside the turbine, including the volute and nozzle, are investigated using the CFD software ANSYS CFX. For a pertinent number of nozzle guide vanes, ranging from 10 to 15, the turbine efficiency was higher than 80%, with the highest efficiency shown by a nozzle with 15 guide vanes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.217-225
• /
• 2009

The study on the left turning trajectory has not done many times in Korea. Because of this, there are a lot of intersections built without considering on turning trajectory of vehicles, in Korea, and we can see many conflicts, reduced capacity of turn, especially at small intersections. Even if left turn trajectory is designed well, it is not easy to mark exactly on the pavement according to the turn trajectory. This study suggests "drop Islands" which can be seen in Europe, and is introduced in Korea recently, to solve the problems of conflicts and reduced capacity of turning. It suggests a table of location of the stop line so that the engineers who design the intersection design appropriate left turn trajectory and marking of the stop line and turn trajectory is done more exactly. To evaluate the effect of "drop island", two intersections with and without drop island were compared on the turnning radii and location of stop line. Construction of "drop island" can increase the capacity of intersection and safety without additional land and construction expenses.

• Journal of Life Science
• /
• v.14 no.3
• /
• pp.484-489
• /
• 2004

Artificial joint replacement is one of the major surgical advances of the 21th century. The primary purpose of a TKA (Total Knee Arthroplasty) is to restore normal knee Auction. Therefore, ideally, a TKA should: (a) maintain the natural leverage of the knee joint muscles to ensure generating adequate knee muscle moments to accomplish daily tasks such as rising from a chair or climbing stairs;(b) allow the same range of motion as an complete knee; and (c) provide adequate knee joint stability. Four individuals (2 peoples after surgery one year and 2 peoples after surgery three years) participated in this study. All they were prescreened for health and functional status by the same surgeon who performed the operations. Two days of accommodation practice occurred prior to the actual strength testing. The isometric strength (KIN-COM III) of the quadriceps and hamstring were measured at 60$^\circ$ and 30$^\circ$ of knee flexion, respectively. During isokinetic concentric testing, the range of motion was between 10$^\circ$ to 80$^\circ$ of knee flexion (stand-to-sit) and extension (sit-to-stand). for a given test, the trial exhibiting maximum torque was analyzed. A 16-channel MYOPACTM EMG system (Run Technologies, Inc.) was used to collect the differential input surface electromyographic (EMG) signals of the vastus medialis (VM), vastus lateralis(VL), rectus femoris (RF) during sit-to-stand and stand-to-sit tests. Disposable electrodes (Blue SensorTM, Medicotest, Inc.) were used to collect the EMG signals. The results were as follows; 1. Less maximum concentric (16% and 21% less for 1 yew man and 3 years mm, respectively) and isometric (12% and 29%, respectively) quadriceps torque for both participants. 2.14% less maximum hamstrings concentric torque for 1 year man but 16% greater torque for 3 years mm. However, 1 year man had similar hamstring isometric peak torque for both knees. 3. Less quadriceps co-contraction by 1 year man except for the VM at 10$^\circ$-20$^\circ$ and 30$^\circ$-50$^\circ$ range of knee flexion.

• Composites Research
• /
• v.20 no.3
• /
• pp.43-49
• /
• 2007

Dynamic instability of rotating disks is the most significant factor to limit its rotating speed. Application of composite materials to rotating disks may enhance the dynamic stability leading to a possible design of rotating disks with lightweight and high speed. Whereas much work has been done on the effect of transverse shear and rotary inertia, called Timoshenko effect, on the dynamic behavior of plates, there is little work on the correlation between the effect and the rotation of disk, especially nothing in case of composite disks. The dynamic equations of a rotating composite disk are formulated with the Timoshenko effect and the vibrational analysis is performed by using a commercial package MSC/NASTRAN. According to the results, the Timoshenko effect goes seesaw in some modes, unlike the well-known fact that the effect decreases as the rotating speed increases. And it can be concluded, based only on the present results, that decrement of the Timoshenko effect by disk rotation grows larger as the thickness ratio decreases, the diameter ratio increases, the modulus ratio increases, and the mode number increases.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.131-136
• /
• 1993

일반적으로 공작기계 주축계에 대해서 요구되는 기본적인 항목들로는 고강성, 고감쇠, 고회전정밀도, 저발열, 장수명 등이 있다. 최근에는 이러한 기능들과 함께 가공능률과 가공정밀도의 향상을 도모하기 위해서 고속절삭을 실현햐ㄹ 수 있는 공작기계 주축계의 고속화, 즉 고속 주축계에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 고속주축계의 동특성을 체계적으로해석하기 위해서 주축회전수의 영향을 고려한 유한요소모델(finite element model)을 도입하였다. 특히 주축은 세장비가 비교적 자기 때문에 Timoshenko보 이론으로, 베어링은 유한한 폭을 가지고 있기 때문에 반경방향 외에도 모멘트방향의 강성 및 감쇠특성을 가지고 있는 것으로 모델화 하였다. 그리고 고속주축계의 설계조건들을 도출하기 위해서 동특성 해석결과들로 부터 고속주축계의 모드매개변수들인 고유진동수와 감쇠비에 대한 주축 회전수, 베어링의 지지특성, 베어 링의 간격, 주축재료의 내부감쇠율 등의 영향을 고찰하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.345-348
• /
• 2002

본 연구에서는 128개의 능동소자로 구성된 convex형 초음파 탐촉자를 회전시켜 3차원 입체영상을 구현 할 수 있도록 하는 구동부를 설계 및 제작하여, 3차원 입체 영상 진단용 초음파 섹터 트랜스듀서를 개발하였다. 탐촉자는 중심주파수 4.5Mhz, 대역폭 $66\%$로 제작되었으며, 구동부는 탐촉자의 축을 스텝모터와 평기어를 이용해 회전시킴으로써 3차원 입체영상을 획득할 수 있게 고안하였다. 그리고 피부와 유사한 고분자재료를 사용하여 탐촉자의 회전반경과 동일하게 음향커버를 설계 및 제작하였다. 제작된 초음파 섹터 트랜스듀서는 정밀한 각도 제어 및 구조적 안정성이 확보되었음을 확인 할 수 있었다.

• Journal of the Korea Society for Simulation
• /
• v.28 no.3
• /
• pp.83-89
• /
• 2019

This research describes quantitative effects of initial dispersion conditions upon the dispersion randomness of Magnus rotor bomblets. Ratios of the missile spin rate to the missile velocity, a, flight path angles, ${\gamma}$ and altitudes, h, were changed to investigate their effects on dispersion randomness. Dispersion was analyzed through calculation of 6 degree of freedom motion equation with aerodynamic coefficients from wind tunnel experiments. In order to analyze the randomness, regression analysis is adopted to calculate the coefficient of determination. The optimized ratio of the missile spin rate to the missile velocity and flight path angle were obtained and the dispersion altitudes had more effect on the dispersion diameter and had less effect on dispersion than other parameters.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.8
• /
• pp.649-656
• /
• 2016

Thick composite disks are utilized in the fast-rotating machines such as turbine disks, flywheels, and so on. The effects of rotating speed on the dynamic characteristics of thick composite disks are deeply studied in this paper. The dynamic governing equations of a rotating composite disk including transverse shear and rotary inertia are derived and then formulated into the finite element equation. Isotropic, circumferentially reinforced disk, and radially reinforced disk are selected for the numerical analysis. The inclusion of the transverse shear and rotary inertia into the governing equation of the rotating disks makes the natural frequency reduced as well as the critical speed. The present results show that the rotation of a thick disk may not reduce the effect of transverse shear and rotary inertia depending on anisotropy, thickness ratio and mode, unlike the results reported in other studies.