• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.46-57
• /
• 1998

노스리지 지진하의 모멘트 저항 강 뼈대 구조물에 대한 사례연구결과를 요약하면 다음과 같다. 1) 탄성과 비탄성 동적해석 방법의 신뢰도가 구조물의 동적거동의 모형화에 크게 영향을 받는다는 것을 알 수 있었고 구조물의 동적거동의 모형화를 위한 보다 개선된 지침과 기준의 필요성이 부각되었다. 2) 비탄성 횡방향 정적해석은 6층높이의 건물까지는 비탄성동적해석과 유사한 결과를 보였으나 10층 이상의 건물에서는 고차 모드 효과를 고려하지 못하여 상당히 상이한 결과를 나타냈다. 3) 응답스펙트럼 해석은 노스리지 지진하에서 탄성 시간이력 해석에 비하여 100%까지 상이한 결과를 보였다. 특정지진에 대한 구조물거동의 상세조사시 응답 스펙트럼 해석 대신 시간이력해석을 수행하는 것이 바람직하다. 4) 탄성 부재력의 저항능력 비와 소성 회전각 등의 거동지수 등은 현존하는 건물의 연결부 손상을 검사하기 위한 지침을 마련하는데 도움을 줄 수 있지만 특정 연결부를 검사에서 배제시키는 유일한 근거로 사용되어서는 안될 것으로 판단된다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06d
• /
• pp.35-39
• /
• 1998

Methyl과 ethyl formate의 초음파 흡수계수를 0.15-2 MHz의 주파수 범위, 온도 5-3$0^{\circ}C$에 걸쳐 1MHz 이하에서 정확한 초음파 흡수측정이 가능한 광 회절 초음파 공명법을 이용하여 측정하였다.그 결과, cisdhk trans 에 의한 초음파 완화 현상은 전형적인 단일 완화현상을 보였고, 그 스페트럼으로부터 완화주파수와 완화강도를 결정할 수 있었다. 완화 주파수와 완화강도의 온도 의존성으로부터 활성화 에너지(ΔH#)와 에너지 차(ΔH)를 구하였다. 측정된 methyl과 ethyl formate의 활성화 에너지는 각각 9.8과 8.9kcal/mol 이었고, 에너지 차는 각각 2.3 과 2.2kcal/mol로 나타났다

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.213-214
• /
• 2007

에폭시/마이카는 높은 절연성과 강도, 열 안정성 등으로 인하여 고전압 회전기 고정자 권선의 절연재료로 사용되고 있다. 그러나 최근 청단기기의 등장과 냉난방 부하의 증가로 첨두 부하가 크게 증가하여 발전기 부하변동과 자동 정지횟수가 빈번해지고 있다. 이에 따라 기존에 사용되고 있는 절연재료를 획기적으로 발전시킨 새로운 소재의 개발이 필요하게 되었다. 최근 나노기술은 이러한 기술적 한계를 극복할 수 있는 좋은 대안으로 떠오르고 있다. 그리고 나노 크기의 층상화합물은 기존의 재료에 비해 월등한 전기적, 기계적, 열적 특성을 지닌 것으로 알려져 있다. 본 논문에서는 에폭시 기지에 층상 마이카와 점토를 혼합한 나노복합재료를 제조하여 주파수별, 온도별 유전특성을 살펴보았다.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2006

This paper presents test results on reduced beam section (RBS)program addressed panel zone (PZ) strength as the key variables. PZ strength has been much debated issue for several decades. A desirable range of PZ strength has not yet been proposed despite the fact that a significant amount of RBS test data is available. Test results from this study and by others showed that panel zones could easily develop a plastic rotation of 0.01 radian without causing distress to the beam flange groove welds. At this deformation level, the amount of beam distortion (i.e., buckling) was about one half that developed in strong PZ specimens. A criterion for a balanced PZ strength that improves the plastic rotation capacity while reducing the amount of beam buckling is proposed.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.188-193
• /
• 2015

Blast Furnace Slag is good for enhancing the qualities of concrete such as reducing hydration heat increasing fluidity, long-term strength and durability, but it has some problems: construction time is increased or the rotation rate of form is decreased due to low development of early strength. In this study, an aqueous alkali solution for alkali activated reaction was obtained by the electrolysis using concentrated water discharged from seawater desalination process. Prepared aqueous alkali solution was applied to produce mortars using blast furnace slag. The results can be summarized as follows : For the mortar, compressive strength was decreased below 2% of NaOH and increased below 6% of NaOH. And compressive strength was increased gradually with increasing NaOCl contents. However, NaCl contents of mortars caused a decrease of 28days strength above early strength.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.3
• /
• pp.299-311
• /
• 2003

This paper presents a finite element procedure to estimate the ultimate strength of space frames considering spread of plasticity. The improved displacement field is introduced based on the inclusion of second-order terms of finite rotations. All the non-linear terms due to bending moment, torsional moment, and axial force are precisely considered. The concept of plastic hinges is introduced and the incremental load/displacement method is applied for elasto-plastic analyses. The initial yield surface is defined based on the residual stress, and the full plastification surface is considered under the combined action of axial forces, bending and torsional moments. The elasto-plastic stiffness matrices are derived using the flow rule and the normality condition of the limit function. Finite element solutions for the ultimate strength of space frames are compared with available solutions and experimental results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.409-422
• /
• 2013

For stability design and P-${\Delta}$ analysis of steel frames with semi-rigid connections, the explicit form of the exact tangential stiffness matrix of a generalized semi-rigid frame element having rotational and translational connections is firstly derived using the stability functions. And its elastic and geometric stiffness matrix is consistently obtained by Taylor series expansion. Next depending on connection types of semi-rigidity, the corresponding tangential stiffness matrices are degenerated based on penalty method and static condensation technique. And then numerical procedures for determination of effective buckling lengths of generalized semi-rigid frames members and P-${\Delta}$ and shortly addressed. Finally three numerical examples are presented to demonstrate the validity and accuracy of the proposed method. Particularly the minimum braced frames and coupled buckling modes of the corresponding frames are investigated.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.10
• /
• pp.13-19
• /
• 2022

This paper is to provide the results of usability of the impact force response signal induced from initial and successive rebound impacting a rock specimen for assessing the compressive strength of rock non-destructively. For this study, a device was devised for impacting a rock specimen and a system for measuring the impact force was set up. The impact was carried out by an initial rotating free falling impact and following repetitive impacts from the rebound action which eventually disappears. Three different kinds of rock specimen were tested and an impact force response signal was measured for each test specimen. The total impact force signal energy which is assessed from integrating the impact force response signal induced from initial and rebound impacts was compared with the directly measured compressive strength for each rock specimen. The comparison showed that the total impact force signal energy has a direct relationship with the directly measured compressive strength and the results clearly indicated that the compressive strength of rock can be assessed non-destructively using total impact force signal energy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6B
• /
• pp.491-497
• /
• 2011

In this study, the flow characteristics around the cutter head, which makes the dredging soil suspended, were measured to evaluate the environmental affect of the dredging works. The PIV was used for measuring the flow characteristics around the cutter head for suction and non-suction cases. As the results, the mean velocity was decreased from the cutter head to outward. The mean velocity decreasing rate of the non-suction case was larger than that of the suction case, but the turbulence intensity decreasing rate of the non-suction case was smaller than that of the suction case because of the suction energy which makes the z-direction flow.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.247-252
• /
• 2001

Recently the steel parts used at automobiles are required to be used under high stress more than ever before in need of the weight down. To achieve this requirement of a high strength steel, it must be necessary to decrease inclusion content and surface defect as like decarburization, surface roughness etc.. In this study, the surface conditions are measured to know the influence on fatigue properties by two cases of shot peening of two-stage shot peening and single-stage shot peening. And for this study, two kinds of spring steel (SUP7, 50CrV4) are used. This study shows the outstanding improvement of fatigue properties at the case of two-stage shot peening in the rotary bending fatigue test and this is assumed to be from on low stress condition, the 1st stage shot peening is not affected by nonmetallic inclusion under metal. it is possible that the 2nd stage shot peening increases the fatigue life and the high stress but that is affected by nonmetallic inclusion under metal. so far beeasily 50CrV4 have made high stress. But, results also show fatigue failures originated at inclusion near surface, and this inclusion type is turned out to be a alumina of high hardness.