• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.255-264
• /
• 2003

Various chain sizes 3-arm star polystyrenes (PS, $M_{w}$=2.80$\times$10$^{5}$ , 2.49$\times$10$^{6}$ g/mol) in t-decalin solution were measured at the temperature range of 20~7$0^{\circ}C$ by means of viscometry and laser light scattering. In order to show universality in the expansion factor of 3-arm star polymer, it was expected that (N/ $R_{G,Br,o}$$^{2}$)$^{3}$2/$\tau$/$\tau$$_{C}$ would be used as an universal parameter, where $R_{G,Br,o}$ was the unperturbed radius of gyration of star PS. However, much better universality had been observed when (N/ $R_{G,Br,o}$$^{2}$)$^{3}$2/$\tau$/$\tau$$_{C}$ parameter of the linear PS was used even for the 3-arm star PS. It could be explained if branching effect had been already taken into account in the part of $\tau$/$\tau$$_{C}$(=[(Τ-Θ$_{Tc}$ )/Θ$_{Tc}$ ]/[(Θ$_{Tc}$ -Τ$_{c}$)/ $T_{c}$]). Here N and Θ$_{Tc}$ stand for the number of monomer unit in a single polymer chain and a kind of theta temperature as the critical solution temperature $T_{c}$ of the infinite molecular weight, respectively.ely.y.ely.

• Journal of the Korean Vacuum Society
• /
• v.3 no.2
• /
• pp.166-172
• /
• 1994

박막이 성장하는 동안 박막성장 상태를 관찰하기 위한 in-냐셔 타원해석기를 제작하였다. 이 타 원해석기는 He-Ne 레이저를 광원으로 사용하며 회전검광자형으로 광량측정방식을 채택하였다. 이 타원 해석기는 편광자 모듈과 검광자 모듈 및 제어부로 구성되어 있으며 이들 모듈은 각각 스퍼터링 챔버에 부착되었다. c-Si 기판 위에 열산화 과정으로 성장시킨 SiO2 박막을 표준시료로 사용하여 보정 및 성능 평가를 하였다 또한 RF 스퍼터링으로 c-Si 기판 위에 SiO2 박막을 성장시키면서 타원해석상수 ΨΔ를 측정하고 근사적 모델에 의한 ΨΔ의 전산모의 성장곡선과 비교해 보았다.

• 기계와재료
• /
• v.10 no.4 s.38
• /
• pp.97-110
• /
• 1998

플라이휠 에너지 저장시스템은 입력되는 잉여전기에너지를 플라이휠의 관성을 이용, 회전 운동에너지로 변환하여 저장하고 필요시 전기에너지로 순시에 출력하는 장치로 배터리와 같은 화학적 에너지 저장장치에 대비되는 기계적 에너지 저장방식 (Electro-mechanical Battery)이다. 플라이휠 시스템은 많은 에너지를 단시간에 저장하고 이를 순발적으로 활용할 수 있는 고효율, 장수명, 무공해의 청정 에너지저장/재생장치로 선진국에서는 무공해 교통수단(전기자동차 등)의 차세대 보조 동력원을 비롯한 각종 민수용, 국방용으로 응용연구가 활발히 진행되고 있다(전력저장용, 인공위성의 태양광 에너지 저장 및 자세제어용, 무소음 적진침투용 차세대 전차의 보조동력원 등). 고효율의 에너지 저장 및 재생을 위해 플라이휠 에너지 저장시스템은 크게 .고속화, 고에너지저장을 위한 복합재 플리이휠 로터.공기 마찰손실 저감용 자가 진공펌프(Self Vacuuming system).지지부 접촉마찰로 인한 에너지 손실 저감용 자기베어링/제어부.플라이휠 구동 및 발전을 위한 Motor/generator.고효율 에너지 입출력 제어부 등의 첨단기술부품으로 구성되어 있는 바, 본 논문에서는 이러한 플라이휠 에너지 저장기술의 국내외 개발현황을 소개하고 현재까지 파악된 기술적 문제점 및 향후 기술개발 전망에 대해 논하고자 한다.

• Journal of the KSME
• /
• v.30 no.5
• /
• pp.454-459
• /
• 1990

마그네틱 베어링으로써 일반베어링의 사용할 때에 있었던 수많은 문제점들이 모두 해결되는 것 처럼 보인다. 여러 가지 특징 및 장점을 갖고 있으므로 가까운 장래에 회전기계 분야에 중요 하게 사용될 것으로 판단된다. 그러나 받아들여질 수 없는 몇 가지 요인들과 산업체에서 완전히 수용하기 이전에 좀 더 기술되어야 할 사항들은 다음과 같다. (가) 신뢰성 : 좀 더 연구할 필 요가 있다. (나) 안정성 : 동적 안정성의 측면에서 연구되어야 한다. (다) 축방향 베어링 : 앞 에서 설명한 바와 같이 원주속도의 한계치가 21,000m/min이고 따라서 그보다 직경이 작은 반경 방향 베어링의 한계 원주속도는 12,000m/min가 된다. (라) 전기적 장애 : 고정자와 절연된 회 전자 사이에는 방전이 일어나게 되고 이에 따라 포텐셜의 장애가 나타나게 된다. (마) 가격 : 크기가 작을 경우에는 일반 베어링에 비해 약 1.5배가량 비싸며 크기가 클 경우에는 약 80%가 된다. 그리고 운전비용은 일반 베어링에 비해 저렴하다.

• Investigative Magnetic Resonance Imaging
• /
• v.16 no.1
• /
• pp.67-75
• /
• 2012

Purpose : We studied enhanced method to view the vessels in the brain using Magnetic Resonance Angiography (MRA). Noticing that Maximum Intensity Projection (MIP) image is often used to evaluate the arteries of the neck and brain, we propose a new method for view brain vessels to stereo image in 3D space with more superior and more correct compared with conventional method. Materials and Methods: We use 3T Siemens Tim Trio MRI scanner with 4 channel head coil and get a 3D MRA brain data by fixing volunteers head and radiating Phase Contrast pulse sequence. MRA brain data is 3D rotated according to the view angle of each eyes. Optimal view angle (projection angle) is determined by the distance between eye and center of the data. Newly acquired MRA data are projected along with the projection line and display only the highest values. Each left and right view MIP image is integrated through anaglyph imaging method and optimal stereoscopic MIP image is acquired. Results: Result image shows that proposed method let enable to view MIP image at any direction of MRA data that is impossible to the conventional method. Moreover, considering disparity and distance from viewer to center of MRA data at spherical coordinates, we can get more realistic stereo image. In conclusion, we can get optimal stereoscopic images according to the position that viewers want to see and distance between viewer and MRA data. Conclusion: Proposed method overcome problems of conventional method that shows only specific projected image (z-axis projection) and give optimal depth information by converting mono MIP image to stereoscopic image considering viewers position. And can display any view of MRA data at spherical coordinates. If the optimization algorithm and parallel processing is applied, it may give useful medical information for diagnosis and treatment planning in real-time.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.116-123
• /
• 2009

Feature point matching, which is finding the corresponding points from two images with different viewpoint, has been used in various vision-based applications and the demand for the real-time operation of the matching is increasing these days. This paper presents a real-time feature point matching method by using a local descriptor derived by Zernike moments. From an input image, we find a set of feature points by using an existing fast corner detection algorithm and compute a local descriptor derived by Zernike moments at each feature point. The local descriptor based on Zernike moments represents the properties of the image patch around the feature points efficiently and is robust to rotation and illumination changes. In order to speed up the computation of Zernike moments, we compute the Zernike basis functions with fixed size in advance and store them in lookup tables. The initial matching results are acquired by an Approximate Nearest Neighbor (ANN) method and false matchings are eliminated by a RANSAC algorithm. In the experiments we confirmed that the proposed method matches the feature points in images with various transformations in real-time and outperforms existing methods.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.6
• /
• pp.516-523
• /
• 2001

This paper introduces a indirect rotor position and speed estimation algorithm for the SRM(switched reluctance motor) sensorless control based on the sliding mode observer and evolutionary programming The information of position and speed is generally provided by encoder or resolve. However, the position sensor not only adds complexity, cost and size to the whole drive system, but also causes limitation for industrial applications. In this paper, in order to eliminate the position sensor, indirect position sensing, indirect position sensing method using sliding mode observer is used for SRM drives. But if sliding mode observer parameters are selected to be large, the corresponding rapid changes of estimated position and velocity result in chattering phenomenon. Therefore in order to reduce the chattering, this observer parameters are optimized by evolutionary programming. And PID controller is also optimized to track precisely for the SRM using evolutionary programming.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.1
• /
• pp.43-53
• /
• 2002

Current torsional provisions focus n restricting torsional effect of asymmetric wall structures by proportioning strength of wall based on the traditional assumption that stiffness and strength are independent. Recent studies have pointed out that stiffness of structural wall is dependent on the strength. This implies that actual stiffness of walls can be determined only after torsional design is finished and current torsional provisions may result in significant errors. To overcome this shortcoming, this paper proposes deformation based torsional design for asymmetric wall structures. Contrary to the current torsional provisions, deformation-based torsional design uses displacement and rotation angle as design parameters and calculates base shear for inelastic torsional response directly. Main purpose of deformation based torsional design is not to restrict torsional response but to ensure intended torsional mechanism according to the capacity design concept. Because displacement and rotation angle can be used as performance criteria indicating performance level of asymmetric structures, this method can be applied to the performance based seismic design effectively.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.848-855
• /
• 2003

During concrete placement, the partially distributed load due to the concrete placement paths creates the lateral force in the connection parts of the shore. In order to restrain this lateral force, the nails must be used in the upper and lower connection parts of shores. But, for the convenience of the construction and dismantling of the shores, the workers hardly use the nails. In this case, the connections of shore cannot resist the shear force and rotation. And this situation may cause the collapse of form-shore system. Therefore, contact and spring models for the connection analysis of the form-shore systems are required. If we take into account this construction situation, we need to understand the effects of shear and rotation stiffness according to the several types of connection parts in shores as a case study. This study evaluates the shear and rotation stiffness of the connection parts of shores according to the variations of the lengths, numbers and positions of nails, and then presents the experimental results depending on the end conditions of shores. And, these results can be used as a spring model and critical load evaluation data for the connection analysis of form-shore system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.102-108
• /
• 2013

In manufacturing of solution-processed organic electronic devices, a spin coating method is frequently used, but which has a big problem. Solvent in a solution has a decisive effect such as physical and chemical damage for successive solution-based film deposition. Such a severe damage by solvent restricts for fabricating building blocks of multi-layered films from solutions. In this work, it will be shown that a proper combination of well-known solvents gives a chance to fabricate multi-layered film, also this new method was applied to make organic field effect transistor. Two types of bottom gate, bottom contact transistors were fabricated, one of which is fabricated by conventional single spin coating method, the other fabricated by double spin coating method. Compared with the electrical characteristics in a single spin coated transistor, the leakage current between source and gate electrode was decreased, ON state current was increased, and the extracted saturation mobility was multiplied more than 2.7 time for double spin coated transistors. It is suggested that the multiple coated gate dielectric structure is more desirable for high performance organic ferroelectric field effect transistors.