• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.175-179
• /
• 2012

본 연구에서는 실제 하천에서 유사량을 산정하기 위해 유량의 횡분배법을 활용하는 방법을 제시하였다. 유량의 횡분배법은 Shiono and Knight (1990)가 제안한 방법으로, 하천의 한 측점에서 유량 및 수위가 결정된 경우 지배방정식의 해석을 통하여 횡방향으로 단위 폭 당 유량과 수심적분 유속을 구하는 방법이다. 제안된 방법을 Camenen et al. (2012)의 측정 자료에 적용하였다. Camenen et al. (2012)은 Slovakia의 Danube River에서 basket type bedload sampler를 이용하여 Gabicikovo 발전소 하류 지점에서 소류사를 채취하였다. 유량 횡분배법에 의해 계산된 수리량에 기초하여 modified Meyer-Peter and Muller 공식 (Wong and Parker, 2006)과 Camenen and Larson (2005)공식을 이용하여 횡방향 소류사 분포와 총 소류사량을 계산하였다. 제시된 소류사량 산정 기법을 Danube River의 소류사 측정 자료를 통해 검증하였다.

• Korean Journal of Logic
• /
• v.19 no.1
• /
• pp.83-106
• /
• 2016

We compare the approaches to natural numbers and the induction principles in Frege's Grundgesetze and in systems thereafter. We start with an illustration of Frege's approach and then explain the use of induction principles in Zermelo-Fraenkel set theory and in modern type theories such as Calculus of Inductive Constructions. A comparison among the different approaches to induction principles is also given by analyzing them in respect of predicativity and impredicativity.

• Clean Technology
• /
• v.20 no.1
• /
• pp.13-21
• /
• 2014

Because of the water scarcity caused by the increase of salinity in the underground water, seawater desalination stands out as one of the most promising solution. As there are so much energy costs in operating desalination plants, new hybrid process which is more effective should be researched. A geothermal VMD (vacuum membrane distillation) hybrid process is a competitive alternative for seawater desalination. Because geothermal energy has significant characteristics of high capacity factor to operate the power plant at full capacity for 24 hour per day, it can be a priority heat source of VMD superior to any other renewable energies such as solar and wind power. In this study, we design a geothermal VMD hybrid process, analyze it economically and finally compare the result with a case of conventional VMD process. Geothermal VMD hybrid process generates $23,822,409 of NPV (net present value) more than the conventional VMD process in case of 5% discount rate. The break-even point between these processes is 5.36 year. Sensitivity analysis indicates that steam cost is the most decisive influence variable to the economic outcome.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.67-67
• /
• 2009

알루미늄 합금 재질은 무게의 경량화와 기계적강도가 우수하며 다른 비철금속에 비하여 값이 저렴한 장점이 있다. 현재 산업현장에서 활용하는 가장 흔한 접합법으로 TIG, RSW 등과 같은 용융 용접법을 현재는 많이 사용 하고 있지만 열전도도가 높아 열 확산이 빠르고, 이에 따라 모재의 팽창이 일어나 열변형을 유발하며, 산화피막은 그 내부에 함유된 결정수가 아크용접 중 분해되어 수소를 방출함으로 기공이 발생하여 부도체로 저항용접시 전도성을 방해하는 등의 문제를 발생시킨다. 또한 철에 비해 4배정도 큰 전기전도율에 따라 저항용접시 대전류를 사용해야 하는 등의 문제점이 발생하고 있다. 이와 같은 알루미늄 합금의 용융용접 과정에서 발생하는 단점을 극복하는 기술로 고상접합 방법인 마찰교반용접법(Friction Stir Welding)이 활용되고 있다. FSW는 1991년 영국의 TWI에서 개발된 최신 용접법으로 모재를 용융점 아래에서 고상용접시키는 방법으로 용융에 따른 열변형과 흄가스(hume gas)와 스패터(spatter)를 억제시켜 주는 친환경적인 용접법이다. 이러한 마찰교반용접의 기술은 그동안 특허에 따른 로열티가 산업현장에서 사용하는데 문제가 되었으나 특허보호 기간인 20년이 1년정도의 기간밖에 남지 않은 상황에서 그 사용은 날로 증가하리라 본다. 이러한 마찰교반용접부의 결함을 평가하는 방법에는 UT, RT 등이 활용되고 있으나 얇은 박판에서의 결함검출은 용이하지 않다. 이리한 문제점을 해결하기위하여 초음파 가진을 이용한 적외선 열화상 검출 기법을 이용하여 마찰교반용접부의 결함 검출 가능성을 연구하였다. 20kHz의 주파수를 400Watt로 가진시켜 겹치기(lap joint) 마찰교반용접이된 A6061-T6의 용접부에 초음파를 입사하였을 때 발생하는 열을 적외선 열화상 카메라를 이용하여 측정함으로써 마찰교반겹치기 용접부의 결함 검출에 활용하였다. 용접부에 초음파를 입사하였을 때 부분적으로 온도차이가 발생하였고, 그에 따른 열화상을 검출 할 수 있었다. 이러한 열화상과 실제 시험편의 용접부의 강도를 평가하기 위하여 인장시험을 하였다. 그 결과 초음파 적외선 열화상 검출에서 발열부위가 나타난 부분이 인장시험에서 낮은 인장강도를 보였다.

• The Korean Society of Law and Medicine
• /
• v.22 no.3
• /
• pp.31-55
• /
• 2021

The Personal Information Protection Act, one of the revised 3 Data Laws, established a special cases concerning pseudonymous data. As a result, a personal information controller may process pseudonymized information without the consent of data subjects for statistical purposes, scientific research purposes, and archiving purposes in the public interest, etc. In addition, as a follow-up to the revised Personal Information Protection Act, a 'Guidelines for Utilization of Healthcare Data' was prepared, which deals with the pseudonymization in the medical sector. The guidelines are meaningful in that they provide practical criteria for accomplices by defining specific interpretations and examples that take into account the characteristics of healthcare data. However, the guidelines need to clarify the purpose of using pseudonymous data and strengthen the fairness of the composition of the data deliberation committee. The guidelines also require establishing a healthcare data compensation framework and strengthening the protection of rights for vulnerable subjects. In addition, the guidelines need to be adjusted for inconsistency with the Bioethics and Safety Act and the Medical Service Act. It is expected that this study will contribute to the creation of a safe environment for the utilization of healthcare data as well as the improvement of related laws and systems.

• Journal of Food Hygiene and Safety
• /
• v.37 no.1
• /
• pp.15-20
• /
• 2022

The purpose of this study was to compare the conventional culture method, enzyme immune method and the PCR method using species-specific primer in the analysis on the Salmonella spp. found in domestically distributed pet foods. For the study, Salmonella spp. were detected from 175 samples. From the conventional culture method and the PCR method, two samples (jerky and corn gluten) were determined as positive. Also, from the enzyme immune method, one sample (corn gluten) was test-positive. The study revealed that application of the PCR method with species-specific primer allows better distinguishment between the species of the strain collected from the samples than the conventional culture method and/or the enzyme immune method.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.287-301
• /
• 2019

Preservation of the original form is the principle for conservation, management and utilization of cultural heritages. Thus, non-destructive analysis of these samples are important field of the conservation science. In this study, examined the applicability of nondestructive surface X-ray diffraction analysis (ND-XRD) for cultural heritage by materials (rock specimen, jade stone, pigment painted specimen, earthen artifact, metal artifact). In result, all type of sample is recorded suitable X-ray diffraction patterns for identifying mineral composition in case of surface condition with adequate particle size and arrangement. And diffraction pattern is reflected surface information than matrix. Therefore, ND-XRD is thought to be applicable not only mineral identification but also interpretation of manufacturing technique and alteration trend about layered sample (in horizontally or vertically). Whereas some exceptional diffraction patterns were recorded due to overlapping information on specific crystal planes. It caused by skip the sample treatment (powdering and randomly orientation). It could be advantageously used for mineral identification, such as preferred orientation of clay minerals. In contrast, irregular diffraction pattern caused by single crystalline effect is required careful evaluation.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.388-397
• /
• 2012

The tennis was one of the most popular sport in the general physical education lesson. However there are many problems such as difficult of improvement tennis skill, lack of class days and so many students in a class. These reasons could ultimately damage the overall quality of class. The purpose of this research was to beginner students was fun and easy to learn. The tennis lesson using tools were 1.selective hitting ball, 2. high net hitting ball, 3. hitting orange ball. Scores of the experimental group(n=23) and the control group(n=21) were compared. In order to verify course content was the same 15 weeks, conducted a tennis teaching methods to take advantage of the tools. And tools to take advantage of the students who participated in a class analysis of the qualitative data (interviews, documents, questionnaires, observations, journals). As a result, the satisfaction scores of the experimental group were higher than those of the control group. The tennis lesson using tools to take positive effect(meaning, improved skill, easy, fun/curious/confident) and negative effect(difficulties of adaptation, a high challenge level) was induced. In summary of the quantitative/qualitative data 'Orange Ball' has a positive impact on the girls than boys and teaching methods using tools gave generally positive influence to students.

• Journal of Korea Port Economic Association
• /
• v.38 no.2
• /
• pp.95-107
• /
• 2022

Shipping companies earn profits through cargo transportation, and therefore, investment decisions to purchase ships are more important than anything else. Nevertheless, the cash flow discount method was mainly used in the economic analysis method, which assumes that all situations are static. This study shows that the real option model is useful in the economic analysis of ship investment. This economic analysis took into account the irreversibility of investment and uncertainty of benefits. In particular, this study used a binary option price determination model among real options. In addition, the simulation was conducted using actual investment data of A shipping company. As a result of the analysis, the investment value of used ships according to the net present value method was analyzed as negative (-), but the investment value in the real option model reflecting the flexibility of decision-making was evaluated as having positive (+) economic feasibility. It was analyzed that economic feasibility is affected by profit volatility and discount rate. Therefore, this study is expected to help shipping companies make more flexible decisions by using the real option model along with the existing net present value method when making ship investment decisions.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.105-111
• /
• 2024

The SLA (Stereolithography Apparatus) method is a type of 3D printing technique predicated on the transformation of liquid photocurable resin into a solid form through UV laser exposure, and its application is increasing in various fields. In this study, we conducted research to enhance the hydrophobicity and transparency of SLA 3D printing surfaces for microfluidic system production. The enhancement of surface hydrophobicity in SLA outputs was attainable through the application of hydrophobic coating methods, but the coating durability under different conditions varied depending on the type of hydrophobic coating. Additionally, to simultaneously achieve the required transparency and hydrophobic properties for the fabrication of microfluidic systems, we applied hydrophobic coatings to the proposed transparency enhancement method from prior research and compared the changes in contact angles. Teflon coating was proposed as a suitable hydrophobic coating method for the fabrication of microfluidic systems, given its excellent transparency and high coating durability in various environmental conditions, in comparison to titanium dioxide coating. Finally, we produced an Electrophoresis of Charged Droplet (ECD) chip, one of the digital microfluidics systems, using SLA 3D printing with the proposed Teflon coating method (Fluoropel 800). Droplet manipulation was successfully demonstrated with the fabricated chip, confirming the potential application of SLA 3D printing technology in the production of microfluidic systems.