• Radiation Oncology Journal
• /
• v.23 no.3
• /
• pp.186-193
• /
• 2005

Purpose: To improve the management of a medical linear accelerator, the records of operational failures of a Varian CL2l00C over a ten year period were retrospectively analyzed. Materials and Methods: The failures were classified according to the involved functional subunits, with each class rated Into one of three levels depending on the operational conditions. The relationships between the failure rate and working ratio and between the failure rate and outside temperature were investigated. In addition, the average life time of the main part and the operating efficiency over the last 4 years were analyzed. Results: Among the recorded failures (total 587 failures), the most frequent failure was observed in the parts related with the collimation system, including the monitor chamber, which accounted for $20\%$ of all failures. With regard to the operational conditions, 2nd level of failures, which temporally interrupted treatments, were the most frequent. Third level of failures, which interrupted treatment for more than several hours, were mostly caused by the accelerating subunit. The number of failures was increased with number of treatments and operating time. The average life-times of the Klystron and Thyratron became shorter as the working ratio increased, and were 42 and $83\%$ of the expected values, respectively. The operating efficiency was maintained at $95\%$ or higher, but this value slightly decreased. There was no significant correlation between the number of failures and the outside temperature. Conclusion: The maintenance of detailed equipment problems and failures records over a long period of time can provide good knowledge of equipment function as well as the capability of predicting future failure. Wore rigorous equipment maintenance Is required for old medical linear accelerators for the advanced avoidance of serious failure and to improve the qualify of patient treatment.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.4 s.316
• /
• pp.60-69
• /
• 2007

The human eye usually experiences a loss of color sensitivity when it is subjected to high levels of luminance, and perceives a discrepancy in color between high and normal-luminance displays, generally known as a hue shift. Accordingly, this paper models the hue-shift phenomenon and proposes a hue-correction method to provide perceptual matching between high and normal-luminance displays. The value of hue-shift is determined by perceived hue matching experiments. At first the phenomenon is observed at three lightness levels, that is, the ratio of luminance is the same between high and normal-luminance display when the perceived hue matching experiments we performed. To quantify the hue-shift phenomenon for the whole hue angle, color patches with the same lightness are first created and equally spaced inside the hue angle. These patches are then displayed one-by-one on both displays with the ratio of luminance between two displays. Next, the hue value for each patch appearing on the high-luminance display is adjusted by observers until the perceived hue for the patches on both displays appears the same visually. After obtaining the hue-shift values, these values are fit piecewise to allow shifted-hue amounts to be approximately determined for arbitrary hue values of pixels in a high-luminance display and then used for correction. Essentially, input RGB values of an image is converted to CIELAB values, and then, LCh (lightness, chroma, and hue) values are calculated to obtain the hue values for all the pixels. These hue values are shifted according to the amount calculated by the functions of the hue-shift model. Finally, the corrected CIELAB values are calculated from corrected hue values, after that, output RGB values for all pixels are estimated. For evaluation, an observer's preference test was performed with hue-shift results and Almost observers conclude that the images from hue-shift model were visually matched with images on normal luminance display.

• Clinical and Experimental Pediatrics
• /
• v.45 no.2
• /
• pp.166-173
• /
• 2002

Purpose : The aim of this study is to find out the distribution of illness, patterns of medical care utilization and factors determining medical care utilization in elementary school children. Methods : We performed the questionnaires in Gwangju city on 2,036 children of two elementary schools from June 1 to June 30, 1998. Results : The prevalence rate of illness was 32.3%. The distribution of illness was respiratory disease(64.7%), gastrointestinal disease(12.8%), injury & poisoning. The rate of persons having received medical treatment when they were sick, was 89.8%. The selection distribution among various medical facilities was pediatric hospital(46.7%), otolaryngologic hospital(19.8%), pharmacy (13.2%) and internal medicine in the decreasing frequency sequence. The major factors influencing the selection of medical facility were geographic accessibility and good results. The most common reason for the first visit to the pediatric hospital was geographic accessibility. The most common reason for a visit and to otolaryngologic hospital was a good result. The most frequently utilized medical facility for respiratory symptoms and gastrointestinal symptoms was pediatric hospital. The persons influencing the selection of medical facility in the children were mother(73.3%), father( 10.8%), doctor and others in decreasing sequence. The persons answering the questionaire thought that the optimal age of pediatric care was from 0 to 12 years(47.8%), to 10 years(22.4%) and to 15 years(18.5%) in decreasing rate. Conclusion : Other departments instead of pediatrics have treated children. Children have particular growth and development process, which is different to those of adults. So, it is necessary to choose special medical care and adequate medical facilities for children.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.49-62
• /
• 2006

The republic of korea has put a great emphasis on the role of the road as widening a social infra-structural facility. Thus, vast amount of money has been invested on the road establishment. As a result, there has been fruitful outcomes in establishing the road system of the nation especially for the flat road with ease. However, in order to have more systematic and sustainable road system, we should turn our attention to more painful and high-cost regions such as mountainous districts and those are to be developed effectively. The configuration of the road is an important factor to be considered in making a decision for the road planning. Nevertheless, current road planning criterion has no such clarified and objective judging standard for figuring the configuration of the road out and, as a result, speed planning can be decided incorrectly. our research has acknowledged the necessity of estimating the configuration of the road and aimed to make it organized and sorted according to the height, slope, and the vehicle's speed. The results are as follows. First, our research made use of GIS data and classified the road into 9 different areas according to the height and the slope. Also, road classification being matched to the data of vehicle's speed, it has been shown that those characteristics of different areas have made an influence on vehicle's speed. Secondly, based on the results of the similarity between geographical classification and, vehicle's speed of sorted groups according to the height and the slope, conclusively we have classified as flat, rolling region and mountain. Since our research has made use of vehicle's speed for National Highway, it is not applicable to different functional highways. However, for the highway to be established hereafter, it can be a standard for reflection geographical characteristics.

• Korea journal of population studies
• /
• v.28 no.2
• /
• pp.1-32
• /
• 2005

The optimum population of a society or country can be defined as 'the population growth path that maximizes the welfare level of the society over the whole generations of both the present and the future, under the paths allowed by its endowments of production factors such as technology, capital and labor'. Thus, the optimum size or growth rate of population depends on: (i) the social welfare function, (ii) the production function, and (iii)demographic economic interrelationship which defines how the national income is disposed into consumption(birth and education of children included) and savings on the one hand and how the demographic and economic change induced thereby, in turn, affect production capacities on the other. The optimum population growth path can, then, be derived in the process of dynamic optimization of (i) under the constraints of (ii) and (iii), which will give us the optimum population growth rate defined as a function of parameters thereof. This paper estimates the optimum population growth rate of Korea by: specifying (i), (ii), and (iii) based on the recent development of economic theories, solving the dynamic optimization problem and inserting empirical estimates in Korea as the parametric values. The result shows that the optimum path of population growth in Korea is around TFR=1.81, which is affected most sensitively, in terms of the size of the partial elasticity around the optimum path, by the cost of children, share of capital income, consumption rate, time preference, population elasticity of utility function, etc. According to a survey implemented as a follow up study, there are quite a significant variations in the perceived cost of children, time preference rate, population elasticity of utility across different socio-economic classes in Korea, which implied that, compared to their counterparts, older generation and more highly educated classes prefer higher growth path for the population of Korea.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.270-279
• /
• 2018

Purpose: The aim of this study was to assess the patients' perception, acceptance, and preference of the difference between a conventional impression and digital impression through questionnaire survey. Materials and Methods: Thirteen (6 male, 7 female) subjects who experienced both digital and conventional impression at the same day were enrolled in this study. Conventional impression were taken with polyvinylsiloxane and digital impression were performed using a newly developed intra-oral scanner. Immediately after the two impressions were made, a survey was conducted with the standardized questionnaires consisting of the following three categories; 1) general dental treatment 2) satisfaction of conventional impression 3) satisfaction of digital impression. The perceived source of satisfaction was evaluated using Likert scale. The distribution of the answers was assessed by percentages and statistical analyses were performed with the paired t-test, and P < 0.05 was considered significant. Results: There were significant differences of the overall satisfaction between two impression methods (P < 0.05). Digital impression showed high satisfaction in less shortness of breath and odor to participants compared to conventional impression. The use of an oral scanner resulted in a discomfort of TMJ due to prolonged mouth opening and in lower score of the scanner tip size. Conclusion: It was confirmed that the preference for the digital impression using intraoral scanner is higher than the conventional impression. Most survey participants said they would recommend the digital impression to others and said they preferred it for future prosthetic treatment.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.32-37
• /
• 2016

Purpose: To determine the anatomical characteristic of C-shaped canal systems in Korean mandibular 2nd molars by cone beam computed tomography (CBCT). Materials and Methods: The 824 CBCT images were evaluated. These patients were taken CBCT for the diagnosis and treatment of dental implantation on 2013. The 711 mandibular 2nd molars were examined. The configuration of root canal systems were classified according to modified Melton's classifications. Results: Of the 711 mandibular 2nd molars, 21.5% had C-shaped canal systems. This prevalence did not differ with tooth position. Most of the C-shaped canals with bilateral molars were symmetrical. Of the C-shaped canal, the most common configuration Type were Melton's Type I (89%) in the orifice level and Melton's III (83.8%) in the apical level. The prevalence of C-shaped canal was higher in female (25%) than male (13.9%) (P < 0.05). Conclusion: A high prevalence of C-shaped canals were observed in Korean mandibular 2nd molars. For successful C-shaped root canal treatment, the comprehension of root canal systems was important.

• Clinics in Shoulder and Elbow
• /
• v.16 no.1
• /
• pp.27-32
• /
• 2013

Purpose: The purpose of this study is to evaluate the clinical and radiological outcomes of treatment of humerus shaft simple fracture by minimally invasive percutaneous osteosynthesis (MIPO) technique using locking compression plate (LCP). Materials and Methods: Six patients who were operated for humerus shaft simple fracture from August 2010 to May 2011 were enrolled for this study. We checked the cause of injury and the accompanying injuries and evaluated the operation time, the clinical and radiological period of union, postoperative range of motion of the shoulder and elbow joint, pain, activities in daily living, radiologic alignment, and other complications. Results: The clinical period of bone union was 7.2 weeks on average, and the radiologic period of bone union was 8 weeks on average. Follow-up period was more than 12 months in all cases. The angulation through postoperative alignment was 2.8 degrees in AP view and 2 degrees in lateral view. The postoperative range of motion was 167 degrees in forward flexion, 50 degrees in external rotation, and thoracic vertebra 12 level in internal rotation. The average value of visual analogue scale (VAS) was 1.2 and that of KSS was 91.3. The American Shoulder and Elbow Surgeons' score (ASES) was 26.5 and the UCLA score was 31.5. Conclusion: MIPO technique for the humerus shaft simple fracture showed good functional and radiological outcomes and may be considered as one of the treatment options for humerus shaft simple fracture.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.669-682
• /
• 1997

[$Bj\ddot{o}rk$] and Skieller concluded after following facial growth patterns using implants in upper and lower jaw bones that stable structures, which are not influenced by the growth do exist and so these must be the reference landmarks in the process of superimposition. In spite of such facts, for the last 40 years since the discovery of stable structures, most orthodontists have preferred best fit superimposition method to structural method. Cases such as Angle's Class II division 2 malocclusion that show characteristic forward and upward growth or one under long period of post-treatment observation demonstrate that distinct differences exist between the two methods of superimposition. Today, ethical concerns prohibit further growth studies that use implants, md so there is no choice but to use stable structural superimposition method based on $Bj\ddot{o}rk's$ data. Thus, to encourage clinical use of stable structural superimposition method, logic for the use of stable structural superimposition method will be demonstrated, and its technical methods of application will be introduced step by step.

• Korean Journal of Clinical Pharmacy
• /
• v.15 no.1
• /
• pp.41-45
• /
• 2005

심바스타틴은 cholesterol 생합성 과정에서 속도 조절 효소인 HMG-CoA reductase의 강력한 상경적 길항약으로서 고지혈증 치료에 널리 쓰이는 약물이다. 심바스타틴 제제인 MSD 사의 조코 20 mg정을 대조약으로 하여 시험약인 유영 제약의 엘바스타 20mg정의 생물학적 동등성 평가를 하기 위해 22명의 건강한 지원자를 모집하였다. 지원자를 두 군으로 나누어 2정씩 투여하였고 $2{\times}2$ 교차시험을 실시하였다. 심바스타틴의 혈장 중의 농도를 정량하기 위하여 발리데이션된 LC/MS/MS를 사용하였다. 채혈 시간은 투약 전 및 투약 후 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 10, 12 시간에 걸쳐 총 12시점에 걸쳐 시행하였다. 생물학적 동등성을 판정하기 위한 파라미터로 12시간까지의 혈장 중 농도곡선 하 면적 ($AUC_{12hr}$)과 최고 혈중 농도($C_{max}$)를 사용하였다. 12시간 까지의 혈중 농도 곡선 하 면적의 기하 평균은 $17.30ng{\cdot}ml/hr$(시험약)과 $17.35ng{\cdot}ml/hr$(대조약)으로 나타났다. 최고 혈중 농도의 경우 각 각 5.08 ng/ml(시험약)과 5.20 ng/ml(대조약)으로 관찰 되었다. $AUC_{12hr}$의 경우 로그변환한 평균치 차의 $90{\%}$ 신뢰구간이 log0.8510 - log1.1694이었고, $C_{max}$의 경우 log0.8176 - log1.1649로 계산되어 두 항목 모두 log0.8-log1.25이어야 한다는 식품의약품 안전청과 FDA의 기준을 모두 만족시켰다. 이상의 결과를 종합하면 시험약 엘바스타 정 20mg은 대조약 조코정 20 mg에 대하여 생물학적 동등한 것으로 판정되었다.트리머 전기비저항 탐사를 수행하였다. 이를 통해 하저에 케이블을 설치하는 방식에 비해 매우 신속하고 경제적으로 하저에 분포하는 이상대의 분포범위와 발달방향을 규명할 수 있었다.대에 대해 가장 효과적이다. 모델과 현장 적용 결과들을 통해 GRM SSM 방법을 이용하여 불규칙한 굴절면을 가진 지층들에 대해 좀 더 신뢰할 수 있는 정밀한 탄성파 속도를 산출할 수 있음을 보여주고 있다.별한 주의를 기울여야 한다.EX>$\alpha/\beta$=10인 경우 $62.0\~121.9\;Gy_{10}$ (중앙값: $93.0\;Gy_{10}$)의 분포를, ${\alpha/\beta}=3$인 경우 $93.6\~187.3\;Gy_3$ (중앙값=$137.6\;Gy_3$ )의 분포를 보였다. MD-BED $Gy_3$는 직장합병증 발생과의 관계는 통계적으로 유의하였고, 방광합병증과는 유의하지 않았다. 직장합병증과의 연관성은 MD-BED $Gy_3$보다 개별 환자의 직장전벽 총 선량 BED값인 R-BED $Gy_3$가 훨씬 더 높았다. 요도카테터 풍선의 후방지점이 대변하는 방광의 총 선량 BED값인 V-BED $Gy_3$도 방광합병증과 경향성 테스트에서 통계적 유의성을 보였다. 하지만, 어떠한 방사선선량도 골반제어율과 의미 있는 상관관계를 보이지 않았다. 본 기관에서 주치의의 선호도에 따라 강내근접치료가 외부방사선치료의 중간에 시행되는 형태인 샌드위치기법과 외부방사선치료 후반부에 시행되는 순차적 기법으로 구분하였을 때, 두 방식간 치료성적 및 합병증의 차이는 없었다. 총 치료기간에 대한 분석에서는 치료기간이 길어질수록 재발 위험이 커지는 경향을 보였으나, 나이 및 병기, 종양의 크기, MD-BED $Gy_{10}$