• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.637-645
• /
• 2019

The RFID group proof is an extension of the yoking proof proving that multiple tags are scanned by a reader simultaneously. Existing group proof schemes provide only delayed tag loss detection which detects loss of tag response in a verification phase. However, delayed tag loss detection is not suitable for real-time applications where tag loss must be detected immediately. In this study, I propose a tag response loss detection scheme which detects loss of tag response in the proof generation process quickly. In the proposed scheme, the tag responds with the sequence number assigned to the tag group, and the reader detects the loss of the tag response through the sequence number. Through an experiment for indistinguishability, I show that the sequence number is secure against an analyzing message attack to distinguish between specific tags and tag groups. In terms of efficiency, the proposed scheme requires fewer transmissions and database operations than existing techniques to determine which tags response is lost.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.89-98
• /
• 2015

This paper provides a robust and non-fragile $H_{\infty}$ controller design algorithm for time-delayed systems with randomly occurring polytopic uncertainties and disturbances. First, we design time-delayed system considering randomly occurring uncertainties and disturbances. Next, The sufficient condition for the existence of robust and non-fragile $H_{\infty}$ controller is presented by LMI(linear matrix inequality) using Lyapunov stability analysis and $H_{\infty}$ performance measure. Since the obtained condition can be expressed as a PLMI(parameterized linear matrix inequality) by changes of variables and Schur complement, all solutions including controller gain, degrees of controller satisfying non-fragility, $H_{\infty}$ norm bound ${\gamma}$ can be calculated simultaneously. Finally, numerical examples are given to illustrate the performance and the effectiveness of the proposed robust and non-fragile $H_{\infty}$ controller compared with the deterministic uncertainty model even though there exists randomly occurring uncertainties, disturbances and time delays.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.3
• /
• pp.389-395
• /
• 2013

Ethernet is the most widely deployed access network protocol around the world. IEEE 802.3az WG released the EEE standard based on LPI mode to improve the energy efficiency of Ethernet. This paper proposes improved adaptive power control mechanism that can enhance energy-efficiency based on EEE from small Ethernet switch. The feature of this mechanism is that it predicts the traffic characteristic of next cycle by measuring the amount of traffic flowing in during certain period and adjusts the optimal threshold value to relevant traffic load. Performance evaluation results indicate that the proposed mechanism improves overall performance compared to traditional mechanism, since it significantly reduces energy consumption rate, even though average packet delay increases a little bit.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.4
• /
• pp.199-206
• /
• 2022

제주공항은 슬롯 증대사업을 통한 정시성 개선 노력에도 불구하고 항공 교통량의 확대에 따른 혼잡도의 증가가 지속되고 있다. 제주공항 혼잡도의 근본적인 해소를 위해서 추진되고 있는 신공항 건설이 여러 가지 사유로 지연되고 있으며, 실제 건설계획이 확정되더라도 정상적인 공항 운영까지 상당 기간의 시간이 소요될 것으로 예상된다. 따라서 제주 신공항 건설이라는 대규모 신규 투자와는 별개로 신공항 개항 전, 기존 제주공항을 운영하면서 혼잡도를 해소할 수 있는 중단기적 대안을 마련할 필요가 있다. 이에 국토교통부와 한국공항공사는 제주공항에 소형기보다는 최대이륙중량 100톤 이상의 대형항공기(통상 270석 이상 공급) 투입을 유도하는 착륙료 감면 조치를 시행하였으며, 최초 착륙료 10% 감면에서 추가 활성화를 위하여 착륙료 20% 감면으로 확대하여 운영 중이다. 항공사는 착륙료 감면 비율 상향을 통해 대형기 투입에 따른 실질적인 비용이 절감된다면 상기 정책에 적극 동참하게 될 것이다. 본 논문에서는 제주공항에서 실시 중인 착륙료 감면율 확대 조정이 항공사의 대형기 배정에 미치는 효과를 분석하여 정책의 실효성을 고찰하였으며 이에 따른 개선책을 제시하였다.

• The Journal of the Korea Contents Association
• /
• v.8 no.12
• /
• pp.236-245
• /
• 2008

The cancer patient who leads Bone scan and the PET study from in the nuclear medical study what is enforced with the link of early detection and the time which spreads, it will be able to accomplish a positive treatment with the data which presumes that time it researches a degree as cancer discovery initially and only difference of final period the bay it knows. The patient who receives a cancer decision it will be able to accomplish the necessary defense it will be able to delay the time in order, the maximum control the possibility of doing will be becomes the judgement. Cancer decision to initially the nuclear study and treatment it will be in parallel with effort and the investment which are constant and the schedule hour will elapse and to after difficulty some the case which comes to be negligent will be frequent and it will appear with him there to be a possibility of knowing, it will be caused by and the transfer of the cancer sell will be activity. It has a treatment objective and are to each medical treatment agency against and the medical treatment agency worker it will be able to overlook is not the portion is the private plan which needs a more positive disposal, it does.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.39-39
• /
• 2009

고강도강의 용접성은 저온균열 저항성으로 대변되는데, TMCP강과 HSLA강 등이 개발되면서 고강도강의 저온균열저항성이 크게 향상되어 무예열 용접성이 확보되었다. 그러나 용접재료 측면에서는 그에 상응하는 재료의 개발이 지연되어 용착금속부에서의 저온균열이 심각한 문제로 대두되고 있는 실정이다. 이러한 문제는 800 MPa급인 HY-100강재를 HSLA-100강으로 대체하는 과정에서 현실적인 문제로 제기 되었다. 즉 HSLA강은 용접 예열이 필요치 않았으나 기존의 용접재료, 즉 HY-100 강재에 사용하던 용접재료를 사용하게 되면 용착금속부에서 저온균열이 발생하여 용접예열을 생략할 수 없다는 판단에 이르게 되었던 것이다. 이에 본 연구의 목적은 HSLA-100강을 무예열 용접할 수 있는 GMA 용접와이어 개발하는 것이며, 구체적인 개발 목표는 무예열 용접조건에서 800 MPa 이상의 인장강도를 가지며 $-50^{\circ}C$에서의 충격인성이 50 J 이상인 GMA 용접와이어 개발하는 것이다. 이러한 용접재료를 합금설계함에 있어 무예열 용접성을 확보하기 위하여 용접재료의 탄소함량을 0.01% 수준으로 하고, 용착금속의 인장강도와 저온 충격치에 미치는 Mn과 Mo 함량의 영향을 검토하고 각각의 조성을 실험계획법으로 확정하였다. 그리고 확산성수소량에 따른 저온균열 발생 여부를 확인하여 무예열용접성을 확보하기 위해서는 확산성수소량이 3ml/100g 이하가 되어야 한다는 사실을 실험적으로 확인하였다. 그리고 이를 달성하기 위해서는 원자재인 와이어로드의 표면 품질이 중요하다는 사실도 확인할 수 있었다. 다음으로는 실험계획법에 의거하여 선정된 합금조성의 신뢰성을 검증하기 위하여 800kg 중량의 시제품을 생산하였으며, 생산된 시제품에 대해서는 실험계획법에서 사용한 Ar+5%CO2외에도 Ar+20%CO2를 적용하여 보호가스의 영향을 검토하였다. 검토 과정에서 Ar+20%CO2용으로 사용하기 위해서는 용접재료의 Si 및 Mn 함량이 상향조정되어야 함을 확인할 수 있었다. 그리고 탄소함량을 0.05% 수준으로 증가시키면 Mo 함량을 크게 저하시킬 수 있음도 확인할 수 있었다. 이러한 과정을 거쳐 개발된 GMA 용접재료는 무예열 용접조건에서 저온균열이 발생하지 않았으며, 인장강도는 830 MPa이었으며 $-50^{\circ}C$에서의 충격치는 90 J 이상이었다.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.12-21
• /
• 2013

Total Project Cost Management System(TPCMS) was introduced with the purpose of increasing the efficiency of cost control for public construction project in 1994. In this paper, general perception of participants of the public construction project on the TPCMS was examined, and the problems in implementing the TPCMS was figured out through expert interviews and survey. Then better ways to implement the system were drawn based on the problems. To effectively manage the cost of public construction project, basically project cost should be estimated accurately in planning stage and managed based on it to have a project complete within the budget. In addition, the cost need to be managed in more systematic ways in terms of data collection and analysis, and the autonomy in managing the project cost given to the project owner needs to be expanded. Most of all, proper budget should be provided to prevent a project from delay through setting the priority of projects and proper budget allocation based on the priority.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.11
• /
• pp.909-917
• /
• 2021

In this work, a one-dimensional combustor solver was constructed for the scramjet control m odel. The governing equations for fluid flow, Arrhenius based combustion kinetics, and the inje ction model were implemented into the solver. In order to validate the solver, the zero-dimensi onal ignition delay problem and one-dimensional scramjet combustion problem were considered and showed that the solver successfully reproduced the results from the literature. Subsequentl y, a ramjet analysis algorithm under subsonic speed conditions was constructed, and a study o n the inlet Mach number of the combustor was carried out through the thermal choking locatio ns at ram conditions. In such conditions, a model for precombustion shock train analysis was i mplemented, and the algorithm for transition section analysis was introduced. In addition, in or der to determine the appropriateness of the ram mode analysis in the code, the occurrence of a n unstart was studied through the length of the pseudo-shock in the isolator. A performance a nalysis study was carried out according to the geometry of the combustor.

• Journal of the Korean Society of Radiology
• /
• v.10 no.5
• /
• pp.299-305
• /
• 2016

Despite of the development of medical equipments and technology. Pancreatic cancer has maked high false positive rate and low survival rate compared to other cancers. Therefore, early catch of pancreatic cancer is the only way to enhance the viability. It is important to find the exact location of the pancreas cancer in early stage. The method of optimum scan for early detection of pancreatic cancer on PET/CT exam is proposed. Examined the anatomical region that potentially can be missing from the supine position of ordinary pet/ct exam. The characteristics and usefulness of angle variation ($0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $90^{\circ}$) of patients scan position is analyzed. The proposed scan method (named JJ-projection) is bringing advantage of anatomical discrimination by separating stomach, liver, gallbladder duodenum and pancreas. ROC curve analysis is shows to advantage of the JJ-Projection method. The sensitivity has increased 4.6% than the supine delay scan method, the results sensitivity has increased from 91% to 95.2%. The specificity has increased from 75.1% to 84%. Compared with the results observed in cancer by biological biopsy, The accuracy has increased from 86.8% to 94.1%.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.5
• /
• pp.671-683
• /
• 2018

The flood damage caused by heavy rains in urban watershed is increasing, and, as evidenced by many previous studies, urban flooding usually exceeds the water capacity of drainage networks. The flood on the area which considerably urbanized and densely populated cause serious social and economic damage. To solve this problem, deterministic and probabilistic studies have been conducted for the prediction flooding in urban areas. However, it is insufficient to obtain lead times and to derive the prediction results for the flood volume in a short period of time. In this study, IDNN, TDNN and NARX were compared for real-time flood prediction based on urban runoff analysis to present the optimal real-time urban flood prediction technique. As a result of the flood prediction with rainfall event of 2010 and 2011 in Gangnam area, the Nash efficiency coefficient of the input delay artificial neural network, the time delay neural network and nonlinear autoregressive network with exogenous inputs are 0.86, 0.92, 0.99 and 0.53, 0.41, 0.98 respectively. Comparing with the result of the error analysis on the predicted result, it is revealed that the use of nonlinear autoregressive network with exogenous inputs must be appropriate for the establishment of urban flood response system in the future.