• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.6
• /
• pp.381-388
• /
• 2018

This paper presents a generalized finite element formulation for plastic hinge modeling based on lumped plasticity in the classical Euler-Bernoulli beam elements. In this approach, the plastic hinges are effectively modeled using proper enrichment functions describing weak discontinuities of the solution. The proposed methodology enables the insertion of plastic hinges at an arbitrary location without modifying the connectivity of elements. The formations of plastic hinges are instead achieved by hierarchically adding degrees of freedom to existing elements. Convergence analyses such as h- and p-extensions are performed to investigate the effectiveness of the proposed method. The analysis results indicate that the proposed generalized finite element method can achieve theoretical convergence rates for both cases where plastic hinges are located at nodes and within an element, thus demonstrating its accuracy.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1592-1602
• /
• 1990

Mixed mode surface crack in finite-width plate subjected to uniform tension and bending has been analyzed in 3-D problem by using boundary element method. The calculations were carried out for the surface crack angles(.a/pha.) of 0.deg., 15.deg., 30.deg., 45.deg., 60.deg., and 75.deg., and for the aspect ratio(a/c) of 0.2, 0.4, 0.6 and 1.0 to get stress intensity factors at the boundary points of the surface crack. For the aspect ratio of 1.0 and the surface crack angles, finite element method was used to check the results in this study. Comparison of the results from both methods showed good agreement.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.146-150
• /
• 2009

구조 시스템 식별은 역문제로서 이상화된 유한요소 모델을 실험치와 일치시키기 위해 유한요소모델을 보정하는 형태로 주로 이루어진다. 이를 위해 비선형 섭동법이 사용되고 있으며 이 방법을 실제 문제에 사용하기 위해서 시스템 축소법에 대한 연구가 진행 되고 있다. 하지만 기존의 방법에서는 유한요소모델의 모든 요소가 실험치와 다르다고 가정하여서 전체 요소 수만큼의 설계 변수를 두어서 역해석을 수행한다. 이런 기존의 방법에서는 시스템이 커짐에 따라 연산 시간이 기하급수적으로 증가하게 되어 어려움이 있다. 설계 변수의 증가는 해공간(solution space)의 확장을 의미하며 이는 해의 정확성에 큰 영향을 끼친다. 본 연구에서는 모델을 적은 수의 설계영역으로 나누어서 반복연산 단계마다 해의 경향성을 이용해서 설계 영역을 전략적으로 변경하는 적응성 설계영역기법을 제안한다. 수치예제를 통해 본 연구에서 제안하는 기법의 정확도와 효용성을 고찰한다.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.54-60
• /
• 2000

There are many works to analyze a simple expansion chamber involving higher order modes. These works are classified to mode matching method, velocity potential method and finite element method. Among these methods, mode matching method has good performance at analyzing a concentric expansion chamber. Generally inlet/outlet pipe cross section area is smaller than middle chamber cross section area. So the number of higher order modes of inlet/outlet pipe can be fewer than that of middle chamber. But mode matching method must use the same number of higher order modes at inlet pipe, middle chamber and outlet pipe. Therefore the redundant modes of inlet/outlet pipe makes the computation time of mode matching method longer. In this paper, the new method, which can select number of each higher order modes of inlet pipe, middle chamber and outlet pipe, was suggested. And this method was compared to conventional mode matching method and finite element method in order to demonstrate the accuracy of the new method and to show that the new method can reduce a calculating time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4_1
• /
• pp.1-8
• /
• 1992

This paper presents a p-version finite element approach for modeling the stress distribution around a circular hole in a finite strip subjected to membrane and flexural behaviors. Also, same problem with a crack emanating from a perforated tension strip was solved by virtual crack extension method. The p-version of the finite element method based on integrals of Legendre polynomials is shown to perform very well for modeling geometries with very steep stress gradients in the vicinity of a circular cutout. Here, the transfinite mapping technique for circular boundaries was used to avoid the discretization errors. The numerical results from the proposed scheme have a good comparison with those by Nisida, Howland, Newman etc. and the conventional finite element approach.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.4
• /
• pp.487-496
• /
• 1985

회전하는 축대칭 얇은 셸구조물의 진동 특성을 유한요소법에 의하여 해석하였다. 2개의 절점을 가진 Conical Frustrm 형태의 축대칭 요소를 사용하였으며 원주방향의 변위는 Fourier Series로 분해하여서 방정식의 수를 상당히 줄일 수 있었다. Sanders-Koiter의 셸이론을 사용하였으며 진 동 모우드는 회전의 영향을 설명하기 위하여 대칭 및 비대칭 모우드를 모두 고려하였다. Coriolis 행렬을 포함하는 운동방정식에서 고유 진동수를 계산하기 위해서 질량, 강성 및 Coriolis 행렬로 이루어지는 Hermitian 행렬의 Sturm Sequence Property를 이용하였으며, 좁은 밴드를 갖는 대형 행렬에 알맞는 Determinant Search 방법을 확장하여 고유진동수 및 벡터를 구하였다. 원통형 셸에 대하여 정지한 경우 계산한 고유진동수를 실험치 및 이론치와 비교한 결과 잘 일치됨을 알 수 있었다. 여러 가지 회전 속도에 대해서 얻어진 고유진동스를 이론치와 비교한 결과 잘 일치 됨을 알 수 있어\ulcorner며 회전의 영향으로 traveling wave진동의 현상이 나타남을 알 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.217-227
• /
• 2000

A rectangular ceramic dielectric antenna, placed on the top of a ground plane and fed by coaxial probe, is analyzed by using the finite element method. To verify the proposed code, a rectangular ceramic dielectric antenna was fabricated and the characteristics of antenna were measured. The numerical data obtained is in good agreements with experimental result. Thus we checked the validity of our FEM code, and it can be possible to extend the analysis of the arbitrary 3-D antenna on a ground plane fed by coaxial probe.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.506-513
• /
• 1992

본 연구에서는 복합재 구조물에 대하여 유한요소해석법에 현상학적 모델인 전 단지연해석을 도입하여 강성저하와 모재파손을 예측하고 변형률을 매개변수로 한 Wei- bull 함수를 섬유파손해석에 도입하여 초기파손후의 거동을 묘사하고자 한다. 그리 고 면내전단하중이 작용하는 경우에 대해 전단지연해석을 수행할 수 있도록 모델링을 확장했다. 모재균열의 존재로 인한 단층의 강성변화는 실험으로 측정이 불가능하므 로 유한요소해석을 수행하여 비교하였다. 이 모델로부터 전단강성의 저하를 평가하 는 방법을 사용하였으며, 모재파손의 밀도 예측도 평균변형률 개념으로 전단효과를 고 려할 수 있도록 수정하였다. 그리고 초기파손후의 거동을 점진적으로 해석하기 위해 비선형 유한요소프그램을 작성하고, 상기의 모델을 도입하여 초기파손후의 거동을 보 다 정확히 묘사할 수 있는 방법을 제시하고 예로서 평시편에 대해 해석하고 실험치 및 타방법의 결과와 비교하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.387-393
• /
• 2010

This paper studies static crack growth of asphalt pavement using the extended finite element method (XFEM). To consider nonlinear characteristics of asphalt concrete, a viscoelastic constitutive equation using the Maxwell chain is used. And a linear cohesive crack model is used to regularize the crack. Instead of constructing the viscoelastic constitutive law from the Prony approximation of compliance and retardation time measured experimentally, we use a smooth log-power function which optimally fits experimental data and is infinitely differentiable. The partial moduli of the Maxwell chain from the log-power function make analysis easy because they change more smoothly in a more stable way than the ordinary method such as the least square method. Using the developed method, we can simulates the static crack growth test results satisfactorily.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.5 s.248
• /
• pp.528-532
• /
• 2006

In the aerospace industry, Cold expansion has been used the most important method that is retarded of crack initiation from fastener hole surface. Cold expansion method(CEM) is that a oversized tapered mandrel goes through the hole in order to develop a compressive residual stress as the passing of the mandrel around the hole. Therefore, because of characteristic of mandrel inserting, Residual Stress Distributions (RSD) are differently generated form Entry, Mid and Exit position of the plate. Also, it is respected that RSD are changed as distances between holes. In this paper, It is performed a FE analysis of RSD by CEM and it is respectively shown RSD in the Entry, Mid and Exit position. It is compared residual stress results form the cold expansion in these two cases: the concurrent CEM and the sequential CEM. From this research, it has been found that compressive residual stress of Entry position is lower than other positions. Also, the concurrent CE of adjacent holes leads to much higher compressive residual stress than the sequential CE. In addition, in the sequential CE case, a compressive RSD of 1 step's hole around is lower than compressive RSD of 2 step's hole around.