Browse > Article
http://dx.doi.org/10.3795/KSME-A.2006.30.5.528

Using the Finite Element Method, 3 Dimensional FE Analysis of Residual Stress by Cold Expansion Method in the Plate Baying Adjacent Holes  

Yang Won-Ho (성균관대학교 기계공학과)
Cho Myoung-Rae (인덕대학 컴퓨터응용설계)
Jang Jae-Soon (성균관대학교 대학원 기계공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.30, no.5, 2006 , pp. 528-532 More about this Journal
Abstract
In the aerospace industry, Cold expansion has been used the most important method that is retarded of crack initiation from fastener hole surface. Cold expansion method(CEM) is that a oversized tapered mandrel goes through the hole in order to develop a compressive residual stress as the passing of the mandrel around the hole. Therefore, because of characteristic of mandrel inserting, Residual Stress Distributions (RSD) are differently generated form Entry, Mid and Exit position of the plate. Also, it is respected that RSD are changed as distances between holes. In this paper, It is performed a FE analysis of RSD by CEM and it is respectively shown RSD in the Entry, Mid and Exit position. It is compared residual stress results form the cold expansion in these two cases: the concurrent CEM and the sequential CEM. From this research, it has been found that compressive residual stress of Entry position is lower than other positions. Also, the concurrent CE of adjacent holes leads to much higher compressive residual stress than the sequential CE. In addition, in the sequential CE case, a compressive RSD of 1 step's hole around is lower than compressive RSD of 2 step's hole around.
Keywords
Cold Expansion Method; Fastener Hole; Finite Element Method;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Pavier, M. J., Poussard, C. G. C. and Smith, D. J., 1997, 'A Finite Element Simulation of the Cold Working Process for Fastener Holes,' J. Strain Anal. 32, pp. 287-300   DOI   ScienceOn
2 Papanikos, P. and Mequid, S. A., 1999, 'Elasto-Plastic Finite Element Analysis of the Cold Expansion of Adjacent Fastener Holes,' J. Mater. Process. Technol. 89-90, pp. 424-428   DOI   ScienceOn
3 Jang, J. S., Yang, W. H. and Kim, C., 2002, 'Analysis for the Residual Stress by Cold Expansion Method and Interference Fit,' Korea. Soc. of Mech. Eng. A, Vol. 26, No. 8, pp. 1615-1622   과학기술학회마을   DOI
4 Kim, C., Kim, D. J., Seok, C. S. and Yang, W. H., 2004, 'Finite Element Analysis of the Residual Stress by Cold Expansion Method Under the Influence of Adjacent Holes,' J. Mater. Process. Technol. 153-154, pp. 986-991   DOI   ScienceOn
5 ABAQUS User's Manual, Ver. 6.4, HKS Inc., USA