• Economic and Environmental Geology
• /
• v.35 no.1
• /
• pp.13-23
• /
• 2002

The chemical compositions of groundwaters from the granite areas mainly belong to Ca-HC0$_{3}$ and Na-HC0$_{3}$type, and some of these belong to Ca-(CI+S0$_{4}$) and Na-(CI+S0$_{4}$) type. Spring waters and groundwaters from anorthosite areas belong to Ca-HC03 and Na-HC03 type, respectively. The result of reaction path modeling shows that the chemical compositions of aqueous solution reacted with granite evolve from initial Ca-CI type, via CaHC0$_{3}$ type, to Na-HC0$_{3}$ type. The result of rain water-anorthosite interaction is similar to evolution path of granite reaction and both of these results agree well with the field data. In the reaction path modeling of rain watergranite/anorthosite reaction, as a reaction is progressing, the activity of hydrogen ion decreases (pH increases). The concentrations of cations are controlled by the dissolution of rock-forming minerals and precipitation and re-dissolution of secondary minerals according to the pH. The continuous addition of granite causes the formation of secondary minerals in the following sequence; gibbsite plus hematite, Mn-oxide, kaolinite, silica, chlorite, muscovite (a proxy for illite here), calcite, laumontite, prehnite, and finally analcime. In the anorthosite reaction, the order of precipitation of secondary minerals is the same as with granite reaction except that there is no silica precipitation and paragonite precipitates instead of analcime. The silica and kaolinite are predominant minerals in the granite and anorthosite reactions, respectively. Total quantities of secondary minerals in the anorthosite reaction are more abundant than those in the granite reaction.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.1
• /
• pp.21-26
• /
• 2014

Red clay has been used for making rakuyaki for the past 400 years. Because the resources for red clay in Japan are being depleted, many potters in Japan began to develop new materials which can replace red clay. In this study, It is analyzed that the chemical and physical properties of red clay from Shigaraki (Shiga, Japan), and developed a novel engobe which can be used for making Rakuyaki instead of Shigaraki red clay. Results from Raman spectroscopic examination showed that ferric oxide content in Shigaraki red clay is 9.4 % (Goethite 5 %, Wustite 4.4 %), and that the mechanism of red color development by the firing at $900^{\circ}C$ for 10 min is the chemical transformation of Goethite into Hematite, and the subsequent formation of solid solution with Alumina and Silica. To make similar ferric oxide content to that of Shigaraki red clay, we added 5 g of Goethite and 9 g of Wustite to 100 g of White kaolin from Hadong area (Gyeongsangnam-do, Korea). The $L^*a^*b^*$ color scale of the mixture was 56.83, 27.22, and 23.28, respectively, and stable red color was successfully developed under the same firing condition used for Shigaraki red clay.

• Journal of the Korea Convergence Society
• /
• v.12 no.7
• /
• pp.113-123
• /
• 2021

This study aims to present a plan to develop the funeral culture industry based on the results of a survey on the contents of funeral culture awareness, funeral culture industry development, and funeral culture education according to age groups. The survey in this study was researched by Gallup Korea, and the survey method was an online research using a structured questionnaire. The survey was conducted twice, from February 5, 2021 to February 8, 2021, and from February 18, 2021 to February 19, 2021. The effective subjects are 316, and the sampling method is allocated by sex and age. As a result of the study, cremation was preferred by all age groups, and the places where cremated remains were placed were high in the natural burials and ossuary hall. Although there are some differences by age groups, it was surveyed that generally, the elderly than the younger were less reluctant to sign up for condolence products, funerals in life, farewell trips, purchase farewell travel products, funeral insurance, and counsel with death-related experts. The results of this study are expected to contribute to interdisciplinary convergence research on the recognition and development of the funeral culture industry.

• Journal of Service Research and Studies
• /
• v.14 no.2
• /
• pp.37-47
• /
• 2024

Currently, social interest in post-cremation funerals is growing due to the establishment of cremation culture. In addition, as awareness of nature-friendly funeral methods spreads in modern times, the demand for tree burial grounds and tree groves, which are representative natural burial methods, is increasing. However, if the current method of relying on trees is used, the forest burial may damage the forest and turn it into another cemetery. The tree decoration is a funeral method that contains the temporal meaning of humans returning to the space of nature that we have, and the philosophical meaning that humans return in compliance with nature. Like this, there are quite a few concerns. Even though tree burials are not the traditional burial facilities we are familiar with, many of the facilities and operating systems adopt the standards of park cemeteries and have stricter standards and restrictions than natural burials under the law. This rigidity is intended to preserve the forest, but the reality is that it limits the expansion and operation of tree plantations. To this end, this study seeks to find specific improvement measures for sustainable tree plantation operation. To this end, we look at the types of natural fields in foreign countries and find directions for tree planting that can be effectively applied and established in accordance with the sentiments of the people. Specific improvement measures include an enshrinement method that does not rely on memorial trees, the operation of anonymous or anonymous tree planting, a change in the method of visiting and commemorating, and various mountaineering methods, thereby suggesting alternatives to sustainable tree planting in Korea. The place where tree planting is implemented is the forest, that is, the forest itself. I should be a place where the spirit of natural return, which is the essence of the deceased, can be celebrated through the forest, not a funeral facility. By doing so, it will be possible to provide the public value of the forest, that is, the social function of the forest, in the name of an eco-friendly funeral service.

• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.13-20
• /
• 2012

This study was carried out to examine the effect of cutting condition on the growth of rooted cuttings and their subsequent growth of cut flower in plug cutting of Dendranthema grandiflorum 'Baekma'. The more leaves were attached to the cutting, the higher shoot growth of rooted cutting was observed. Cutting with two to six leaves was effective in shoot growth and rooting than any other treatment. Shoot growth of rooted cutting was not affected by cutting length, but rooting was better in 5 to 7 cm long cutting. Shoot growth and rooting of rooted cutting was promoted by increasing the cutting diameter, and rooting was better in 3.6-4.2 mm thick cutting than 3.1 mm thick cutting. As the treating concentration of NAA increased, shoot growth was inhibited and root length shortened in rooted cutting. Soaking with $100mg{\cdot}L^{-1}$ ${\alpha}$-naphtalene acetic acid (NAA) for 1 h was effective in shoot growth and rooting. Root growth such as root number, root length, and root weight was better in rooting medium mixed with 2:2 of peatmoss:perlite than the other treatments. When rooted cutting produced from cutting with four or six leaves was planted, better length, weight, and leaf number of cut flower was observed. In rooted cutting produced with 7-9 cm long cutting, growth of cut flower such as length, weight, and ray flower number was more effective than the others. Therefore, it is recommended that the 7 cm long and 3.6 mm thick cutting with four to six leaves is used to improve their rooting and subsequent growth of cut flower in plug cutting of Dendranthema grandiflorum 'Baekma'.

• KOMUNHWA
• /
• no.58
• /
• pp.85-117
• /
• 2001

This paper is focused on Buddhistic and ancient fortress excavated recently in Cheonnam Province. The outcome of Buddhism is researching the building place of the period of the Unified Shilla Period in Geumdunsaji(金芚寺址). This is the first research for Bud

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.443-450
• /
• 2008

나노튜브 형상의 할로이사이트는 화장품 약물 등 활성물질의 방출시간을 연장하는데 응용할 수 있는 천연 나노광물이다. 할로이사이트를 이용한 활성물질 적재 방출 제어기술을 최초로 등록한 1997년 미국 특허를 필두로 2007년에는 비타민과 글리세린 등의 기능효과제를 광범위하게 포함하는 기능성화장품 제조기술에 대한 특허가 출원되었다. 학술 논문으로서는 화장품 보다 서방형 약물전달 기술에 관한 연구가 주로 발표되고 있다. 최근 화장품용 분체에 단순한 기재로서의 역할뿐만 아니라 기능성을 추가로 부여하고 있다. 특히, 할로이사이트는 기능성 화장성분의 전달 속도를 제어할 수 있으며 다른 분체보다 밀도가 낮아 팩 크림 로션류의 기재로 적합하다. 따라서 나노튜브형 할로이사이트를 활용한 나노캐리어 기술은 최근 화장품 유형별 시장점유율에서 2위로 부상한 기능성화장품 분야의 핵심기술로 성장할 것으로 기대된다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.21-30
• /
• 1990

This paper describes a hardware implementation of the interframe monochrome video CODEC using a MC-CVQ(Motion Compensated and Classified Vector Quantization) algorithm. The specifications of this CODEC are (1) the resolution of image is $128{\times}128$ pixels, and (2) the transmission rates are about 10frames/sec at the 64Kbps channel. In order to design the CODEC under these conditions, it is implemented by a multiprocessor system composed of MC unit, CVQ nuit and decoder unit, which are controlled by microprogramming technique. And the 3~stage pipelined ALU(Arithmetic and Logic Unit) is adopted to calculate the minimum error distance in the MC unit and CVQ nuit. The realized system shows that the transmission rates are 6-15 frames/sec according to the relative motion of the video signal.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.539-548
• /
• 2011

This study was conducted to control unseasonable flowering in a standard chrysanthemum 'Baekma' bred in Korea by 2-chloroethylphosphonic acid (ethephon) and night temperature (NT) through suppression of the transition from a vegetative to a reproductive stage under long day length caused by high NT in summer season. Ethephon was applied either once or twice at a concentration of 0, 200, 400, or $800mg{\cdot}L^{-1}$. The NT within controlled mini-plastic houses was maintained at 13, 17, or $21^{\circ}C$. The NT at $13^{\circ}C$ showed the greatest inhibiting effect of unseasonable flowering among all NTs regardless of various combinations of ethephon concentration and frequency. Moreover, the inhibition tendency of unseasonable flowering was distinctly decreased in a NT-dependant manner. Higher NTs reduced cut flower length and number of leaves, but increased the number of young leaves attached to top part of the flower. Higher ethephon concentrations and lower NTs increased cut flower length and the fresh weight of total, stem, and leaves due to the extension of vegetative growth period. Thus, if it is difficult to control the NT below $21^{\circ}C$ in greenhouses in the summer season, we recommended to spray more than $200mg{\cdot}L^{-1}$ ethephon once after planting to suppress unseasonable flowering and to ensure sufficient length of cut flowers.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.10
• /
• pp.427-436
• /
• 2013

In this paper, a method of moving path control of an automatic guided vehicle in an indoor environment through recognition of marker images using vision sensors is presented. The existing AGV moving control system using infrared-ray sensors and landmarks have faced at two critical problems. Since there are many windows in a crematorium, they are going to let in too much sunlight in the main hall which is the moving area of AGVs. Sunlight affects the correct recognition of landmarks due to refraction and/or reflection of sunlight. The second one is that a crematorium has a narrow indoor environment compared to typical industrial fields. Particularly when an AVG changes its direction to enter the designated furnace the information provided by guided sensors cannot be utilized to estimate its location because the rotating space is too narrow to get them. To resolve the occurrences of such circumstances that cannot access sensing data in a WSN environment, a relative distance from marker to an AGV will be used as fingerprinting used for location estimation. Compared to the existing fingerprinting method which uses RSS, our proposed method may result in a higher reliable estimation of location. Our experimental results show that the proposed method proves the correctness and applicability. In addition, our proposed approach will be applied to the AGV system in the crematorium so that it can transport a dead body safely from the loading place to its rightful destination.