• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.193-206
• /
• 2002

A signal optimization model is proposed by applying the Cell-Transmission Model(CTM) as an embedded traffic flow model to estimate a system-optimal signal timing plan in a transportation network composed of signalized intersections. Beyond the existing signal-optimization models, the CTM provides appropriate theoretical and practical backgrounds to simulate oversaturation phenomena such as shockwave, queue length, and spillback. The model is formulated on the Mixed-Integer Programming(MIP) theory. The proposed model implies a system-optimal in a sense that traffic demand and signal system cooperate to minimize the traffic network cost: the demand departing from origins through route choice behavior until arriving at destinations and the signal system by calculating optimal signal timings considering the movement of these demand. The potential of model's practical application is demonstrated through a comparison study of two signal control strategies: optimal and fixed signal controls.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.38-45
• /
• 1998

It is a tedious and excessive time consuming process to model the local area of crack tip part of structures in calculation of stress intensity factors by FEM. So, in this paper, the hybrid method of FEM and BEM approach was formulated to overcome this type of problems. The multi-domained BEM was adopted to simplify the modelling process of complex geometry and singularity characteristics of crack tip part and the ordinary FEM modelling was used in the rest part. The example calculations shows very good results compared with analytic solutions and other numerical method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5347-5356
• /
• 2011

In this paper, we compared various shear deformation functions for modelling anti-symmetric composite sandwich plates discretized by a mixed finite element method based on the Lagrangian/Hermite interpolation functions. These shear deformation theories uses polynomial, trigonometric, hyperbolic and exponential functions through the thickness direction, allowing for zero transverse shear stresses at the top and bottom surfaces of the plate. All shear deformation functions are compared with other available analytical/3D elasticity solutions, As a result, reasonable accuracy for investigated problems are predicted. Particularly, The present results show that the use of exponential shear deformation theory provides very good solutions for composite sandwich plates.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.427-436
• /
• 2010

This paper deals with a task assignment problem of multiple UAVs performing multiple tasks on multiple targets. The task assignment problem of multiple UAVs is a kind of combinatorial optimization problems such as traveling salesman problem or vehicle routing problem, and it has NP-hard computational complexity. Therefore, computation time increases as the size of considered problem increases. To solve the problem efficiently, approximation methods or heuristic methods are widely used. In this study, the problem is formulated as a mixed integer linear program, and is solved by a mixed integer linear programming and a genetic algorithm, respectively. Numerical simulations for the environment of the multiple targets, multiple tasks, and obstacles were performed to analyze the optimality and efficiency of each method.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.11
• /
• pp.20-26
• /
• 1995

본 연구는 JIT생산시스템에서 혼합조립라인에 대한 제품순서게획에 대한 연구이다. 본 연구에서 고려하는 조립라인을 효과적으로 수행하기 위해서는 서로 다른 제품들을 조립하기 위한 제품순서가 결정되어야 한다. 필요한 제품을 적시에 적당한 양만큼 생산하는 JIT생산시스템에서의 제품 순서계획의 목적은 라인에서 소비 되는 모든 부품들의 소비율을 일정하게 유지시키는 것이다. 본 연구에서는 부품소비율을 일정하게 유지시키 면서 동시에 순서계획수립시 계획파괴를 줄일수 있도록 그룹개념을 이용하여 순서계획문제를 정식화하고 이 에 대한 해법을 제시하였다. 본 연구에서 개발한 해법의 우수성을 평가하기 위해 총변동과 순서계획의 파괴빈도에 대한 실험을 통하여 기존해법과 비교한 결과 본 연구의 해법이 우수한 결과를 제공하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.559-566
• /
• 2003

In this study, we present a new highly accurate two-dimensional curved composite beam element. The present element, which is based on the Hellinger-Reissner variational principle and classical lamination theory, employs consistent stress parameters corresponding to cubic displacement polynomials with additional nodeless degrees to resolve the numerical difficulties due to the spurious constraints. The stress parameters are eliminated and the nodeless degrees are condensed out to obtain the (9x9) element stiffness matrix. It should be noted that the stacking sequences without transverse deformation to the load plane makes a two dimensional analysis of curved composite beams practically useful . Several numerical examples confirm the superior locking-free behavior of the present higher-order laminated curved beam element.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.53-55
• /
• 2014

Offshore 에서의 oil & gas 생산은 해상이라는 환경으로 인한 고유의 특성 때문에 항상 다수의 변수들에 영향을 받으며, 막대한 비용이 소요되기 때문에 비용을 최소화하며, 비용 대비 수익을 최대화시키기 위한 optimal design이 필수이다. 본 논문은 가상의 offshore plant와 이에서 생산된 oil의 수요지들을 설정하여 시장수요에 따른 offshore 생산의 최적화 문제를 연구대상으로 하며, 다수의 offshore oil fields를 보유한 major oil company가 당면할 수 있는 offshore production에 관한 문제를 일반화하여 정의하고, 이윤을 극대화시킬 수 있는 최적화 모형을 혼합정수계획모형(mixed integer programming)으로 정식화 하였다. 최적화 모형의 해는 Microsoft office excel solver를 통해 구하였으며 그 계산실험의 결과를 요약하여 보고한다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.512-519
• /
• 2002

본 연구에서는 임의의 형상의 다중세포 단면을 갖는 복합재료 블레이드에 대한 유한요소 구조해석을 수행하였다. 보 해석 모델은 구조연성 효과와 단면 벽의 두께, 횡 전단변형, 비틀림과 연관된 워핑 및 워핑구속효과 등을 고려하고 있다. 블레이드 힘-변위 관계식은 Reissner의 반복족에너지 함수를 이용한 혼합이론을 적용하여 유도하였다. 이 관계식은 굽힘 및 전단에 대해서는 Timoshenko 보의 형태로 그리고 비틀림 변형은 Vlasov 이론으로 근사하고 있다. 결과적인 [7×7] 구조강성 행렬은 전단변형 및 전단강성계수들을 특이한 가정에 의존하지 않고도 해석적으로 기술하고 있다. 본 정식화 과정을 통해서 구한 보 이론을 이중세포로 구성된 에어포일 형상의 복합재료 블레이드에 적용하였으며, 기존의 실험 연구 및 다차원 유한요소해석 결과들과 비교 연구를 수행하여 본 해석모델의 타당성을 보이고자 하였다.

• Journal of Aerospace System Engineering
• /
• v.17 no.1
• /
• pp.24-32
• /
• 2023

This paper studied HART II in descending flight using rotorcraft analysis code based on geometrically exact beam (GEB) model. The present GEB model expressed by a mixed variational formulation could capture the geometrically nonlinear behavior of the blade without arbitrary assumptions. In previous results, correlation of airloads with structural moments for HART II was not as good as blade deflections. However, in present results, predictions of airloads and structural loads are fairly correlated with measured data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.5
• /
• pp.365-372
• /
• 2021

This paper deals with an optimal Weapon-Target Assignment (WTA) algorithm for Closed-In Weapon Systems (CIWS), considering variable burst time. In this study, the WTA problem for CIWS is formulated based on Mixed Integer Linear Programming (MILP). Unlike the previous study assuming that the burst time is fixed regardless of the engagement range, the proposed method utilizes the variable burst time based on the kill probability according to the engagement range. Thus, the proposed method can reflect a more realistic engagement situation and reduce the reaction time of CIWS against targets, compared to the existing method. In this paper, we first reformulate the existing MILP-based WTA problem to accommodate the variable burst Time. The proposed method is then validated through numerical simulations with the help of a commercial optimization tool.