• Korean journal of food and cookery science
• /
• v.17 no.6
• /
• pp.634-638
• /
• 2001

The objectives of this study were to investigate quality characteristics of Ssookgaedduck which containing 0, 5, 10, 15, 20% of mugwort. The result of sensory evaluation showed that the Ssookgaedduck containing 10-15% mugwort had the high overall acceptability, color and flavor preference. By increasing the level of mugwort, Hunter color L value of Ssookgaedduck decreased. The hardness of Ssookgaedduck increased by the addition of mugwort. However, during 3 days of storage, the hardness of 10-20% mugwort containing Ssookgaedduk increased slowly. For 3 days of storage, 20% mugwort containing Ssookgaedduk showed the lowest total bacterial count than others.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.119-127
• /
• 2011

This paper shows development of 1-3 dimensional hybrid mesh method to analysis flow induced by ultra-high speed vehicle inside a long distance tunnel. For three-dimensional analysis of the tunnel system many meshes are required. However it is not efficient to calculate the whole tunnel system in three-dimension. Therefore in this paper, three-dimension meshes was used to describe stations, shafts and around vehicle, and one-dimension meshes was used to describe the tunnel except these three sections. And unsteady flow analysis of the ultra-high speed vehicle was performed with UDFs in commercial software, Ansys vr. 12.0.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.57-63
• /
• 2016

Thermally induced phase separation (TIPS) and nonsolvent induced phase separation (NIPS) were simultaneously induced for the preparation of flat PVDF membranes. N-methyl-2-pyrrolidone (NMP) was used as a solvent and dibutyl-phthlate (DBP) was used as a diluent for PVDF. When PVDF was melt blended with NMP and DBP, crystallization temperature was lowered for TIPS and unstable region was expanded for NIPS. Ratio of solvent to diluent changed the phase separation mechanism to obtain the various membrane structures. Contact mode of dope solution with nonsolvent determined the dominant phase separation behavior. Since heat transfer rate was greater than mass transfer rate, surface structure was formed by NIPS and inner structure was by TIPS. Quenching temperature of dope solution also affected the phase separation mechanism and phase separation rate to result in the variation of structure.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.9
• /
• pp.321-326
• /
• 2015

In this paper, we proposed an algorithm which could transmit reliable data between smart devices by using inaudible high frequency of audible frequency range and cyclic redundancy check method. The proposed method uses 18 kHz~22 kHz as high frequency which inner speaker of smart device can make a sound in audible frequency range (20 Hz~22 kHz). To increase transmission quantity of data, we send mixed various frequencies at high frequency range 1 (18.0 kHz~21.2 kHz). At the same time, to increase accuracy of transmission data, we send some mixed frequencies at high frequency range 2 (21.2 kHz~22.0 kHz) as checksum. We did experiments about data transmission between smart devices by using the proposed method to confirm data transmission speed and accuracy of the proposed method. From the experiments, we showed that the proposed method could transmit 32 bits data in 235 ms, the transmission success rate was 99.47%, and error detection by using cyclic redundancy check was 0.53%. Therefore, the proposed method will be a useful for wireless transmission technology between smart devices.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.273-279
• /
• 2011

Turbulent flow analysis around a wind turbine blade was performed to evaluate the power performance of offshore wind turbine. Fluent package was utilized to solve the Reynolds-averaged Navier-Stokes equations in non-inertial rotating coordinates. The realizable k-$\varepsilon$ model was used for turbulence closure and the grid system combining structured and unstructured grids was generated. In the first, lift and drag forces of 2-D foil section were calculated and compared with existing experimental data for the validation. Then torque and thrust of the wind turbine blade having NACA 4-series sections were calculated with fixed pitch angle and rpm. Tip speed ratio was varied by changing wind speed. In the next, three kinds of end plate were attached at the tip of blade in order to increase the power of the wind turbine. Among them the end plate attached at the suction side of the blade was found to be most effective. Furthermore, performance analysis with tilt angle and rake was also performed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.244-244
• /
• 2012

유기발광소자는 빠른 응답속도, 높은 색재현성, 높은 명암비의 장점을 가지고 있어 차세대 디스플레이로 각광 받고 있으며, 이미 소형 디스플레이로 상용화되고 있다. 고효율과 색안정성을 가진 유기발광소자를 개발하기 위해 소자의 구조에 관한 연구가 활발히 이루어지고 있다. 하지만 청색 유기발광소자는 적색과 녹색 유기발광소자에 비해 낮은 신뢰성, 발광효율 및 색 순도의 문제점을 가지고 있어, 이를 개선하기 위한 다양한 연구가 필요하다. 청색 유기발광소자의 경우 발광층 내부로 주입되는 정공과 전자의 균형을 조절하기 위해 p-i-n 구조를 사용하거나 이리듐-유기물 합성물과 같은 인광물질의 적용하여 발광효율을 높이는 청색 유기발광소자에 대한 연구가 진행되고 있다. 그러나 정공 보조층과 청색 형광층의 도핑구조의 청색 유기발광소자에 대한 발광효율 증진 효과에 관한 연구는 고효율 유기발광소자의 성능향상을 위하여 필요하다. 본 논문에서는 진공 열 박막 증착 방법을 이용하여 정공 보조층과 청색 형광층으로 구성된 적층 발광구조를 사용한 청색 유기발광소자의 발광효율 증진 효과를 관찰하였다. 10%의 2,9-dimethyl-4,7-diphenyl-1,10-phenanthorlene (BCP)로 도핑된 2-methyl-9,10-bis (naphthalene-2-yl) anthracene (MADN)층을 발광층으로 사용한 유기발광소자, 5% MADN으로 도핑된 1, 3-bis (carbazol-9-yl) benzene (mCP) 층을 발광층으로 사용한 소자 및 10% BCP로 도핑 된 MADN 층과 5% MADN로 도핑된 mCP층을 혼합하여 발광층으로 사용한 유기발광 소자를 제작하였다. 유기 발광 소자의 전기적 광학적 특성을 비교하여 청색 유기발광소자의 발광효율 증가 효과를 규명하였다. 적층 발광층을 가지는 소자는 두 단일 발광층 중심부의 경계면에서 축적된 정공에 의해 발생한 공간 전하에 의한 내부 전위차이의 형성으로 발생된 인력으로 더 많은 전자들을 끌어 들이게 되어 발광효율을 증대시킨다. 이 실험의 결과는 MADN 형광물질을 가진 청색 유기발광소자의 발광효율을 증진 시키는 소자 구조를 제안하고 증진 효과에 대한 이해를 높이는데 도움을 줄 수 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.346-347
• /
• 2012

최근 화석연료 대체 에너지원으로서 자동차용으로 연구 개발 및 응용되고 있는 고분자 전해질 연료전지(PEMFC: Proton exchange membrane fuel cells)에서 분리판(Bipolar Plate)은 스택 전체 무게의 80%, 스택 가격의 60% 정도로 가장 높은 비중을 차지한다. 분리판은 연료와 산화제를 공급해주는 통로 및 전지 운전 중에 생성된 물을 제거하는 통로 역할과 anode, cathode로서 전극 역할을 통해 스택 전력을 형성하는 핵심 기능과 전지와 전지 사이의 지지대 역할을 한다. 따라서 분리판은 전기전도성, 내부식성 및 기계적 특성이 우수해야함은 물론이고, 얇고 가벼우며 가공성이 뛰어나야 한다. 현재 가장 많이 사용되고 있는 금속 분리판 소재 중 스테인리스 스틸은 전기적, 기계적 특성 및 내부식성이 우수한 반면, 가격이 비싸고, 중량이 무거운 단점이 있다. 따라서 본 연구에서는 DC 반응성 마그네트론 스퍼터링법으로 전기적, 기계적 특성 및 내부 식성이 우수한 TiN, TiCN 박막을 스테인리스에 비해 중량이 1/3, 소재 단가가 1/4인 알루미늄 기판 위에 증착하여 박막 물성을 평가하였다. DC Power는 400 W, 기판과 타겟 사이의 거리는100 mm, 공정 압력은 0.5 Pa로 고정하였고, 3 inch의 지름과 순도 99.95%를 갖는 티타늄 타겟을 사용하였다. 공정 가스는 Ar을 주입하였으며, 질소와 탄소의 공급원으로는 질소($N_2$)와 메탄($CH_4$) 가스를 사용하여 챔버 내 주입혼합가스의 전체 유량을 50 sccm으로 고정시켰다. 증착된 박막의 전기적, 기계적 특성을 측정하였고, X-ray diffraction (XRD), Scanning electron microscope (SEM)을 이용하여 박막의 미세구조 및 표면 상태를 확인하였다. 또한, 내부식 특성을 평가하기 위해 potentiostatic, potentiodynamic 법을 이용하여 박막의 부식저항을 측정하였다. 증착된 TiN 박막의 경우 질소 함량의 증가에 따라 박막 증착속도는 감소하는 경향을 보였다. 이는 타겟 부근의 질소 라디칼 비율이 증가함에 따라 질화반응이 촉진된 것으로 생각된다. 또한, 증착된 TiN과 TiCN 박막은 반응성 질소 유량과 탄소 유량에 따라 각각 다른 미세구조를 가지는 것을 확인하였다. TiN과 TiCN은 NaCl형의 면심입방격자(FCC)로 같은 구조이며, 격자상수가 비슷하여 전율고용되어 TiCN을 형성하고, 탄소와 질소의 비에 따라 전기적 기계적 특성이 달라짐을 확인하였다.

• Journal of the Korean Chemical Society
• /
• v.52 no.2
• /
• pp.124-132
• /
• 2008

effect of some furfural hydrazone derivatives (I -V) as corrosion inhibitors for C-steel in 3M H3PO4 solution in which M indicates mol/l has been studied using weight-loss and galvanostatic polarization techniques. A significant decrease in the corrosion rate of C-steel was observed in the presence of the investigated compounds. This study revealed that, the inhibition efficiency increases with increasing the inhibitor concentration, and the addition of iodide and thiocynate ions enhances it to a considerable extent. The effect of temperature on the corrosion behavior of C-steel was studied in the range from 30-60oC with and without 510-6 M investigated compounds using weight-loss method. Apparent activation corrosion energy (Ea*) and other thermodynamic parameters for the corrosion process were calculated and discussed. The polarization measurements show that the investigated compounds act as mixed-type inhibitors, but the cathode is more polarized when an external current was applied. The adsorption of these compounds on the surface of C-steel in 3M H3PO4 obeys Frumkins adsorption isotherm. The mechanism of inhibition was discussed in the light of the chemical structure of the investigated compounds.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.6
• /
• pp.35-42
• /
• 2010

This paper describes a 10 bit 80MHz CMOS D/A converter for wireless communication system. The proposed circuit in the paper is implemented with a $0.18{\mu}m$ CMOS n-well 1-poly 6-metal process. The architecture of the circuit consists of the 4bit LSB with binary decoder, and both the 3bit ULSB and the 3bit MSB with the thermometer decoder. The measurement results demonstrates SFDR of 60.42dBc at sampling frequency 80MHz, input frequency 1MHz and ENOB of 8.75bit. INL and DNL have been measured to be ${\pm}$0.38LSB and ${\pm}$0.32LSB and glitch energy is measured to be 4.6$pV{\cdot}s$. Total power dissipation is 48mW at 80MHz(maximum sampling frequency) with a single power supply of 1.8V.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.2
• /
• pp.27-31
• /
• 2002

In this study, $CeO_2$ thin films were etched with an addition of $Cl_2$ gas to $Ar/CF_4$ gas mixing in an inductively coupled plasma (ICP) etcher by the etching parameter such as RF power of 700 W, chamber pressure of 15 mTorr and dc bias voltage of -200 volts. The etch rate of $CeO_2$ films was 250 $\AA$/min with an addition of 10% $Cl_2$ gas to $Ar/CF_4$ gas mixture and the selectivity to SBT film was 0.4 at that condition. The surface reactions of the etched $CeO_2$ thin films were investigated by X-ray photoelectron spectroscopy (XPS). It was analyzed that Ce peaks were mainly observed in Ce-O bonds formed $CeO_2$ or $Ce_2O_3$ compounds. Cl peaks were detected by the peaks of Cl $2p_{3/2}$ and Cl $2p_{1/2}$. Almost all of Cl atoms were combined with Ce atoms like $CeCl_x$ or $Ce_x/O_yCl_z$ compounds.