• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.105-105
• /
• 2020

전 세계적으로 기후변화에 따른 기온상승 및 강수량 증가, 호우일수 증가 등 이상기후로 인해 다양한 형태의 자연재해가 발생하고 있으며, 이로 인해 우리나라에서도 폭우, 풍랑, 가뭄, 대설 등으로 인한 자연재해 발생이 증가하고 있다. 특히 우리나라는 연평균 강수량 1,300mm의 대부분의 강우가 하절기인 6 ~ 9월에 태풍 및 집중호우를 동반하여 발생하기 때문에 연강수량의 60%이상이 여름철에 집중된다. 이러한 여름철에 집중된 강우로 인해 홍수 및 범람 피해가 여름철에 급증하고 있으며, 2차 피해인 산사태 및 토석류 피해 또한 급증하고 있는 추세이다. 토석류는 집중호우 시 자연산지의 취약한 사면이 붕괴되어 유출수와 함께 급경사의 계류로 붕괴된 토석이 유출되면서 토석류로 전이 및 발전하여 계류하부의 주택 및 농경지를 매몰하여 피해를 발생시킨다. 특히 토석류는 유출수와 함께 토석이 급경사의 계류를 따라 빠른 속도로 이동하고 퇴적 시작점에서 높이의 6배까지 이동하여 인명피해 등 큰 피해를 발생시키는 특성이 있다. 이러한 토석류 피해로 인한 피해와 손실을 최소화하기 위해서는 토석류 발생 시 피해 규모를 예측하여야하며, 또한 하부 구조물의 손실을 정량적으로 해석하여 방재정책의 우선순위를 수립하여야 한다. 따라서 본 논문에서는 강우로 인한 토석류 발생시 하부 구조물의 손실을 정량적으로 해석하기 위하여 토사재해 손실·손상함수를 개발하여, 함수를 탑재한 토사재해 피해액 산정모형인 DELET(DEbris flow Loss Estimation Tool) 모형을 개발하였다. DELET를 이용하여 실제 토석류 피해가 발생한 피해지역에 적용하여 토사재해 피해 구조물의 손실을 평가하였다.

• Membrane Journal
• /
• v.27 no.3
• /
• pp.248-254
• /
• 2017

In order to secure the reliability of pathogenic microorganisms such as Cryptosporidium and Giaridia, which are chlorophilic protozoans, membrane filtration systems have been widely used in water purification process. hese integrity tests are classified into direct and indirect methods. Based on the bubble point theory, the pressure-based test in the direct method is presented in the USEPA Guidance Manual with sensitivity to detect a minimum size of pathogenic microorganisms of $3{\mu}m$ or more. Indirect methods are widely used in that they are capable of continuous operation in on-line state, but there is a very low sensitivity of damage detection compared to the direct method, and there is a limit that can not specify the damage area, so it is necessary to improve this sensitivity. In this study, we compared the LRVDIT and UCL values according to the type of membrane defect, number of fiber breaks, and initial set pressure value through the Integrity Test by Pressure Decay Test (PDT).

• Journal of the Korean Institute of Gas
• /
• v.20 no.4
• /
• pp.33-43
• /
• 2016

Grinding, weld deposition, type A sleeve, type B sleeve, composite sleeve, hot tapping and clamp are used as the method to repair the buried pipelines in the United States, UK and Europe. In the event of defect to the pipeline, they have repaired the pipeline through the fitness-for-service assessments. In addition, they have guidelines for the possible repair methods to apply to each type of damage, which is occurred due to the 3rd party construction or corrosion. According to the KGS FS551, Safety Validation in Detail including ECDA(External Corrosion Direct Assessment) as one method of integrity management should be carried out for the old pipeline which supply natural gas as the middle pressure in Korea. Where a defect on the pipelines is found, on the result of Safety Validation in Detail, the pipelines should be repaired or replaced by new piping. However, there are no guidelines or regulations regarding the repair and reinforcement of pipeline, so that, cutting the damaged pipeline and replacing it as a segment of new pipe is the only way in Korea until now. We have suggested pipeline repair methods including type A, B sleeve, composite sleeve, after the survey of foreign repair method and standards including the method of United States and the United Kingdom, and after analysis of the results on pipeline repair test including type A, type B sleeve and composite sleeve.

• Journal of the Korean Magnetics Society
• /
• v.26 no.3
• /
• pp.105-114
• /
• 2016

In this study, For assessment of triangular fibrocartilage complex (TFCC) injury, we acquired images by fat suppressed 3D fast spoiled gradient recalled T1 and fat suppressed Isotropic 3D fast spin echo T1 techniques. For quantitative evaluation, measured signal to noise ratio and contrast to noise ratio and verified statistical significance between two imaging techniques by Mann-Whitney U verification. And for qualitative evaluation, marked 4-grade scoring (0: non diagnostic, 1: poor, 2: adequate, 3: good) on shape of TFCC, artifacts by partial volumes, description of the lesions by two radiologist, verified coincidence between 2 observer using Kappa-value verification. We used 3.0 Tesla MR equipment and 8-channel RF coil for imaging acquisition. As quantitative evaluation results, signal to noise ratio and contrast to noise ratio value of Isotropic 3D fast spin echo T1 technique is higher in every image sections, also between two imaging techniques by Mann-Whitney U verification was statistically significant (p < 0.05). As qualitative results, observer 1, 2 marked a higher grade on Isotropic 3D FSE T1 technique, coincidence verification of evaluation results between two observers by Kappa-value verification was statistically significant (p < 0.05). As a result, during MRI examination on TFCC injury, fat suppressed Isotropic 3D fast spin echo T1 technique is considered offering more useful information about abnormal lesion of TFCC.

• Journal of Embryo Transfer
• /
• v.19 no.3
• /
• pp.283-289
• /
• 2004

This study was conducted to determine the effects of incubation time after cooling on mouse meiotic spindle and chromosome alignment and the optimal incubation time for their restoration. Oocytes at the metaphase II were obtained from superovulated mice. Control oocytes were held at 37$^{\circ}C$ during the experiment. Oocytes were rapidly cooled to $0^{\circ}C$, held for 30 minutes, warmed and incubated at 37$^{\circ}C$ for 5, 15, 30, 60 and 120 minutes, respectively. The morphological features of spindle and chromosomes in oocytes were evaluated by immunofluorescent staining. Meiotic spindle of control oocytes exhibited a normal-looking bipolar configuration(barrel-shaped) and highly fluorescent microtubles. The chromosomes were clustered in a discrete bundles at metaphase plate. Disassembly of meiotic spindle and chromosome dispersion were occurred immediately after chilling of oocyte. Fluorescence intensity index(FIS), normal chromosomes aligned and normal spindle configuration were compared according to incubation time at 37$^{\circ}C$. Restoration of a barrel-shaped spindle and normal chromosome alignment was occurring after 5 minutes incubation at 37$^{\circ}C$, improved as a incubation time increased, and decreased gradually after 120 minutes incubation(P<0.05). The optimal incubation time for restoration of meiotic spindle and chromosomes in cooled oocytes was 60 minutes.

• Journal of the Korean Arthroscopy Society
• /
• v.8 no.1
• /
• pp.9-13
• /
• 2004

Purpose: We studied the incidence rate and patterns of bony contusions of the knees with isolated traumatic meniscal tears. Materials and Methods: We analyzed retrospectively MRI scans and medical records of forty-two patients(42 knees) which had undergone operations for isolated traumatic meniscal tears. Mean age, 33.7 years, the number of patients with lateral, medial or both meniscal tears were 19, 18 and 5, respectively. Bony contusions were examined according to incidence, Location, and in relation to the types of meniscal tears. Results: Bony contusion was identified in 5 cases (11.9%) which had medial meniscal tear (4 cases0 or both meniscal tear (1 case). It was always located on the medial compartment of the joint. Bony contusion was found in the knee with various type of traumatic meniscal tears. Conclusion: Bony contusions in thd knees with isolated traumatic meniscal tear have very low incidence and they seem to disappear at or less than 12 months after the trauma. The bony contusions are mainly related to medial meniscal tear and located in the medial compartment of the joint.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.145-150
• /
• 2019

The purpose of this study was to investigate farmers' field survey to improve animal welfare certification standards and to obtain basic data on the animal welfare level for certified farmers to develop evaluation methods of animal welfare level suitable for domestic farm environment. The subjects of the study were selected 10 animal welfare laying certified farmhouses. The farming certified farming facility survey collected breeding form, head, feed and drink space, breeding density, length and shape of perch. Animal welfare was assessed by the presence of sand bath, spawning, enrichment measures, free range, feathers pecking. The results of the study showed that most the certified animal welfare laying hens complied with the certification standards. All the farms were providing the nest box, but there were farms with more than 20% of the spawning rate. The perches were provided in sufficient length, but only three of ten farms were using rounded perches. Feather damage has been identified in most survey farms, which is likely to be due to feather damage caused by roosters producing both fertilized eggs. In this study, 10 farm households were surveyed. It was not possible to represent the whole certified farmhouse. Therefore, it should be analyzed thoroughly to evaluate the level of animal welfare.

• Tunnel and Underground Space
• /
• v.16 no.1 s.60
• /
• pp.50-57
• /
• 2006

Development of structures such as slope and tunnel, waste disposal, oil and LPG storages, and underground power house and so on, is increasing with the year. The method for appropriate estimation of rock state such as fresh or damaged rocks is also requested with increasing structural development. On these purposes, seismic logging system, which is a simple and easy way for handling as well as small and light, has been developed. Seismic logging method is one of logging tests, which is able to evaluate the state of rock mass with various shapes and is possible to obtain the relatively accuracy data at situ state. In addition, seismic logging method is at to apply to estimate structural behavior, before and after support installed. According to the results obtained from this study, firstly, it is clear that the extent of damage in rock slope due to blasting is able to be evaluated with quantity using seismic logging method, moreover to decide the damage zone in rock slope reasonably. Secondly, it is expected that installing depth of support is able to be decided more effectively and economically, using the results of seismic logging data. Finally, seismic logging method is also able to be applied safety supervision of structures, before and after support installed.

• The Korean Journal of Pharmacology
• /
• v.23 no.1
• /
• pp.25-31
• /
• 1987

The present study examines firstly, the inhibition of collagen gelation to explore the possible involvement of $Cu^{++}$-catalyzed peroxidation in rheumatoid arthritis and secondly, the effect of sodium salicylate on this peroxidative reaction to provide a possible explanation for its mechanism of anti-inflammatory action. Incubation of collagen obtained from rat skin with $Cu^{++}$ and $H_2O_2$ resulted in the inhibition of gelation in terms of maximal turbidity and lag phase, but either $Cu^{++}$ or $H_2O_2$ alone essentially gave no effect in the collagen gelation. In the presence of sodium salicylate the inhibited gelation of collagen induced by $Cu^{++}$ and $H_2O_2$ was reversed with the dependency of the concentration of sodium salicylate. Moreover, the rate of $H_2O_2$ decomposition by $Cu^{++}$ was accelerated by sodium salicylate and this decomposition of $H_2O_2$ was found to be saturable in terms of concentration of this drugs. Thus it can be expected that $Cu^{++}$ -catalyzed peroxidation attacks collagen resulting in change of structural or functional integrity of collagen, and sodium salicylate may act on this peroxidative process, possibly through the enhancement of catalatic action of $Cu^{++}$. From these results $Cu^{++}$-catalyzed peroxidation can be in part responsible for degradation of joint tissue in rheumatoid arthritis and sodium salicylate may exert its anti-inflammatory action by this peroxidative reaction.

• Composites Research
• /
• v.15 no.4
• /
• pp.17-22
• /
• 2002

Small diameter composite helical springs (CS) are developed using a hot plated mold for reinforcement of common optical fiber jumper cord (OJC). The outer diameters of the springs are about 2 ~ 3mm. These springs are inserted into the OJC to protect the damage of an optical fiber from the sudden lateral load. Two types of CS, Yarn type (Y-type) and Band type (B-type), are manufactured to compare the effectiveness for the damage protection. The experimental works were conducted to check the effect of the CS covered around OJC on the mechanical and optical properties. Experimental observations show a considerable effect on the flexural resistance, hence slowing down the deterioration of the optical power by the internal damage of the fiber. Obtained main results are as follows: (1) Y-type CS has better protection abilities to lateral loading than B-types. (2) Compared with bare OJC, CS-OJC has less power loss under the loading. (3) OJC covered with the composite coil spring has a possibility for a practical usage with full fruits.