• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.49-55
• /
• 2017

In the seventies, a number of researchers carried out experiments on pullout tests with prototype equipment, and the pullout test was certified as a reliable nondestructive testing(NDT) method for determining the strength of concrete. To estimate the strength of high-strength concrete, we propose a simplified pullout test that uses as a break-off bolt a standard 10mm bolt with a groove on the shaft, an insert nut, and a pullout instrument that includes a hydraulic oil pump without a load cell. To verify the advantages of the simplified pullout test(low cost, simplicity, and convenience), four wall specimens were tested with two levels of concrete strength, 30 MPa and 50 MPa, using a simplified pullout tester with a load cell. The pullout load and concrete compressive strength were measured every day until day 7, day 14, day 21 and day 28. It was found that the pullout load was very similar to the compressive strength. Therefore, we have verified that a simplified pullout test can be used to evaluate the in-place strength of high-strength concrete in structures. The prediction equation of the groove diameter of the break-off bolt(y) with the concrete strength(x) was derived as y=0.05x+3.79, with a coefficient of determination of 0.88 found through regression analysis.

• Communications of Mathematical Education
• /
• v.30 no.2
• /
• pp.199-223
• /
• 2016

The purpose of this study is to investigate how first and second graders in middle school take in integrated understanding about the concept of function. The data was collected through the questionnaire conducted by the first and second-year students at A, B middle school in Cheongju. The questionnaire consisted of 14 questions related to the extent of understanding a concept of function, the ability to express function and to translate function. The results are summarized as follows. First, the percentage of correct answer made a difference according to the types of representation. Questions leading students to translate a task into a table or an equation showed quite high correct response rates. However, questions asking students to translate a task into graphs showed high incorrect responses. Second, the result shows that students have the different viewpoints depending on their grades when they have to determine whether the suggested situation belongs to function. The first-year students tended to consider function as the concept of 'definition'. On the other hand, the second-year students emphasized 'equation' of function. Finally, only a few students can distinguish the various situations and representations into the definition of function. This result shows that students didn't get the integrated understanding of the concept of function.

• Journal of The Korean Association For Science Education
• /
• v.37 no.1
• /
• pp.169-179
• /
• 2017

The aim of this study is to see school science education from the perspective of CoP (Community of Practice) and to explore the possibility of strategic CoP in Korean school settings. To do this, we conducted a survey using SCaCoP instrument with more than 1600 students from 14 science core schools (SCSs), which were selected across the country, and analyzed their school curriculum, which can be summarized as follows: First, compared to other tracks in SCSs, like the Nature and the Humanity Classes, students of the Science Core Class (SCC) showed significantly higher scores of CoP features for all five factors of SCaCoP (i.e. responsibility of learning, common interest, mutual relationship, open participation, and practice). Second, students of SCC considered activities that require interaction and collaboration among community members (like experiments, hands-on activities, club activities, project works, R&E) to be very positive. Third, SCC students thought that the educational activities of SCSs were not only effective to CoP aims (i.e. self-driven learning, sharing learning outcomes, peer collaboration) but also positive to general aims of science education (i.e. acquiring knowledge, understanding scientific concepts, science-related attitudes). In other words, it appears that educational activities that were effective in vitalizing the CoP have positive effects on ordinary science education, too. These features of SCSs illustrate its possibility of forming strategic COPs in the context of often government-driven Korean education and of bringing in the innovations of school science education.

• Journal of Food Hygiene and Safety
• /
• v.24 no.3
• /
• pp.277-284
• /
• 2009

Currently food-borne disease is being increased at outdoor food services including hotels and restaurants. Speedy and convenient practical monitoring techniques to determine hygienic conditions are needed. This study was designed to verify correlation of direct ATP (Adenosine Tri-Phosphate) examination method using ATP bioluminescence and surveillance with check-list by inspector. Hygienic status of personal hygiene (hands), kitchen utensils (knives, chopping boards, kitchen towels, cap openers, food storage containers, and blade of slice machines), facilities and equipments (refrigerator handles, worktables, and sinks) in five major hotels in Seoul were examined. The result of personal hygiene of hotels was relatively better than other inspection items (46.6 points in personal hygiene, 40.2 points in kitchen utensils, 40.3 points in facilities & equipments). In ATP inspection, kitchen utensils and facilities & equipments were relatively clean comparing with personal hands data ($40.8{\pm}6.77\;RLU/cm^2$). After correlation analysis of surveillance in hygienic status points and ATP value, all results showed negative and high correlation. The surveillance data and ATP results investigating personal hygiene, kitchen utensils and facilities & equipments were highly correlated. The ATP examination method which shows real-time identification could be considered as an appropriate method to alternate current check-list dependent safety management in food services including hotels.

• Journal of Food Hygiene and Safety
• /
• v.22 no.3
• /
• pp.179-191
• /
• 2007

The purpose of this study was to monitor and compare the contamination levels of heterotrophic bacteria and pathogenic bacteria (total coliforms, Escherichia coli O157:H7, Salmonella spp., Vibrio parachaemolyticus, Staphylococcus aureus and Bacillus cereus). The samples collected at fish farms located in the Jeju-island were investigated from March to August in 2006. The contamination levels of S. aureus, B. cereus and Salmonella spp. ranged $0-3.3{\times}10^2 CFU/ml,\;0-2.2{\times}10^2 CFU/ml\;and\;0-5.1{\times}10^1CFU/ml$, respectively, and 85% of moist pellet feeds were contaminated with S. aureus, B. cereus and total coliforms. But total coliforms and E. coli O157:H7 were not detected in oliver flounder (Paralichthys olivaceus). For the production of safe oliver flounder (Paralichthys olivaceus), education of sanitation for employees, control of fish feed, and continuous monitoring for microorganism will be required.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.1
• /
• pp.21-29
• /
• 1993

The magnetic compass as a principal navigational instrument has been long used to fix ship's position and to determine ship's course. Particularly, in the small fishing vessels the studies on performance and rational usages for magnetic compass are requried to improve the safety and productivity of the small fishing vessels even though gyro compass is developed nowadays. For this purpose, the author examined the present condition of the magnetic compasses which are intalled on 219 small fishing vessels, and carried out a series of performance survey for each compass of them and also found the measured values of deviation by installation position of compass, respectively. The results obtained are summarized as follows: 1. The small fishing vessels less than 4 tons among the 219 small fishing vessels from 1 to 10 tons investigated were 50% of them. Only 1% of them were equipped with the deviation correctors, and 14 fishing vessels used the magnetic compasses which are more than 20 years old. 2. According to the compass installation position, the measured values of the deviation of the compass installed on the top bridge and the compass bed in bridge were ascertained to be the smallest, and those values of the compass installed on the bridge deck above engine room were larger and irregular. 3. The concomitant angle of the magnetic compasses installed on the experimented 4 fishing vessels were measured to be 6$^{\circ}$ to 16$^{\circ}$ and not accorded with the Korean standard values.

• Journal of The Korean Association of Information Education
• /
• v.24 no.4
• /
• pp.279-289
• /
• 2020

The purpose of this study is to apply the training program for teachers to strengthen the competence of artificial intelligence education in primary and secondary school teachers and to analyze its effectiveness and analyze teachers' demands for artificial intelligence education to provide basic research data. The referenced training program was designed based on the ADDIE model by selecting the educational contents based on the five core elements of AI, and teachers from the G Metropolitan Office of Education and the AI Education Research Association collaborated to develop the program. The effectiveness of the developed program and questionnaire of teacher needs analysis for AI teaching were examined for content validity. As a result of the training conducted by applying the developed program, satisfaction with each curriculum of the training and the possibility of application to the field were highly evaluated. It was found that teachers consider the need of teaching unplugged activities for AI education and basic AI experiences in elementary school level, and AI education contents including block programming languages and physical computing activities are needed to teach in middle school level.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.6
• /
• pp.837-842
• /
• 2010

The physicochemical properties of coarse semolina (CS), medium semolina (MS) and fine semolina (FS) were investigated to research method applied in noodles processing of Korean wheat semolina. Large particle (>250 ${\mu}m$) was over 75% in all semolinas, except for FS, and the particle distribution of MS and durum semolina (DS) was similar. Crude protein and crude ash were the highest in DS followed by CS>MS>FS. Crude lipid of DS was the lowest among samples and CS, MS and FS were not significantly different. L value was high in semolina with small particle distribution and starch damage was the lowest in DS followed by FS>MS. Amylose content was high in DS (29.80%) and FS (29.08%) with small particle distribution. Water binding capacity was the highest in DS, and FS showed the highest water binding capacity among Korean wheat samples. Solubility and swelling power were noticeably high in FS with low starch damage and small particle distribution. In scanning electron microscope (SEM), FS and MS showed distribution of separated fine particles of flours. From these results, the physicochemical properties of semolina showed many differences by grinding methods. FS should be applied in noodles processing through additional examination about characteristic of noodle making.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.118-124
• /
• 2017

To investigate and analyze the cause of the failure of the connecting rod bolt and the crank pin bearing bolt of the diesel engine of this study, the following results were obtained through site surveying, the investigation of literature referring to similar failures, testing and inspection of the fracture surface, and the experience of the researchers. The fractured crank pin bearing bolt of the diesel engine is estimated to be damaged later than the connecting rod bolt. From the shape of fracture surface, it is evident that the failed connecting rod bolt is fractured by fatigue failure due to abnormally repeated loads (e.g. loosening of the connecting bolt, etc.), and is not failed by brittle fractures due to the impact load. The surface of the U-nut on the fractured connecting rod bolt has been worsening due to the improper use of lubricant (agent for prevention of thread fixing) and no usage of separating the each connecting rod on each cylinder. Moreover, there is the possibility that those poor surface conditions of the fractured connecting rod bolt have affected the failure of the connecting rod bolt of the main engine. And it could be assumed that the mechanical characteristic and manufacturing process of the failed connecting rod bolt and crank pin bearing bolt, which were made by a domestic company, conform to the design requirements for those bolts.

• Communications of Mathematical Education
• /
• v.19 no.1 s.21
• /
• pp.69-100
• /
• 2005

이 연구는 내신성적이 우수함에도 불구하고 수능성적이 저조한 학생들이 문제 해결과정에서 나타내는 특성과 수학불안 요인을 분석하는데 있다. 연구의 대상은 인천시 5고등학교 자연계열 2학년 학생 중 내신성적이 상위 10%안에 드나 수능성적(모의수능성적)은 그렇지 못한 학생 5명이고, 이들의 수학적 성향, 수학 성취도, 개인별 특성 등에 대한 사전 면담자료, 문제풀이과정에 대한 사후 심층면담자료, 현장노트, 수학불안검사를 바탕으로 그들의 특성과 수학불안 요인을 분석한 결과는 다음과 같다. (1) 내신성적은 좋으나 수능성적이 저조한 학생들의 수학 문제 해결 과정에서 나타나는 특성은 수학전 영역에서의 개념부족, 공식암기 부족 등으로 인하여 문제풀이계획을 세우지 못하거나 설사 문제를 푼다고 해도 계산 실수, 착각, 부주의 등으로 인해 정확한 답을 구하지 못하는 것으로 나타났다. (2) 내신성적은 좋으나 수능성적이 저조한 학생들은 어느 정도의 수학 불안은 가지고 있었다. 불안의 요인은 개념부족, 응용력 부족 등 개인적 인지능력에 의한 저조한 수학 성취수준과 수학 공부시간 부족, 풀이시간 부족 등의 환경적 요인에 때문인 것으로 밝혀졌다. 특히 수학개념이 부족한 학생일수록 수학불안 현상이 심하게 나타났다. 따라서 이들 학생들의 수학 문제풀이 과정 중에 나타나는 계산 실수, 부주의, 착각은 그들의 수학 자신감에 많은 악영향을 미치게 되므로, 교사가 이를 그냥 방관할 것이 아니라 적극적으로 확인하고 지도해줄 필요가 있다. 또 교실 수업에서도 수능시험에서 다루고 있는 수학 내적, 외적 문제해결문제, 추론문제, 응용문제, 통합문제에 대한 문제풀이 경험을 하게하여 수학불안을 해소해줄 필요가 있다.)값을 보였으나, 10,000Hz의 높은 측정주파수에서는 더 큰 $E_a$값을 나타냄으로서 반응온도변화에 민감함을 보여주었다.원으로부터 부유물을 증가로 사료되었으며, 이에 대한 대책마련이 시급한 것으로 사료되었다. 수질이 휴양용수로서 사용하는 데에 적합하도록 충분한 차집시설과 환경 기초시설의 설치 운영이 필요할 것으로 판단된다.TEX>$K_s$값이 높고 $V_m/K_s$비율은 낮아 수게에서 질소가 저농도 일 때에는 다른 미세조류와 비교하면 경쟁력이 떨어지고 질소에 대한 기질 친화력은 약한 것으로 나타났다. 낙동강 하류지역에서 M. aeruginosa가 대발생하는 시기에 수중 영양염의 농도 변동은 M. aeruginosa의 영양생리 kinetics 특성과 잘 부합하는 것으로 나타났다.부분을 보완하기 위한 연구가 이루어져야 할 것으로 보인다. 연마방법 간에 상호 연관성이 없었다. FE-SEM관찰에서 레진전색제를 적용한 후의 표면은 모든 군에서 대체적으로 평활한 표면을 나타내었다. 4. 동일한 복합레진과 연마방법으로 처리된 군에서 레진전색제 적용 전과 후의 표면조도 값은 M1B군이 M1군보다, S1B군이 S1군보다 통계학적으로 높게 나타났으며, M4B군과 M5B군은 각각 M4군과 M5군 보다. 그리고 S5B군은 S5군 보다 통계학적으로 낮게 나타났다 (p<0.05). 본 연구를 종합하여 보면, 복합레진의 종류에 따라 표면조도의 순서는 다르게 나타났고, polyester strip 하에서 복합레진이 중합된 경우 가장 낮은 표면조도 값과 평활한 표면을 제공하였으며 전반적으로 anishing bur는 가장 높은 Ra값과 거친 표면을 제공하였다.