• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.47-51
• /
• 2009

증발산량을 산정하는 것은 자연현상과 인문현상을 이해하는 것의 기초가 된다. 이에, 최근 증발산량을 추정하는 많은 연구가 진행되고 있는 가운데 원격탐사 기법을 이용하는 것이 효과적인 것으로 알려지고 있다. 본 연구에서 소개할 SEBAL (Surface Energy Balance Algorithm for Land) (Bastiaanssen, 1995) 모형은 Landsat이나 NOAA 또는 MODIS 같은 원격탐사 위성으로부터 획득한 디지털 이미지 데이터(위성영상)를 이용하여, 지표에서 일어나는 증발산과 기타의 에너지 교환을 계산하는 이미지-프로세싱 모델이다. 우리나라 대상 유역에 위성영상을 사용하여 증발산량을 추정하는 SEBAL 모형의 적용 가능성을 검토하여, 유역 내 증발산량 분포의 시공간적 특성을 분석하고자 하였다. 연구 대상 지역은 유역 면적 약 6661.1km2의 충주댐 유역으로, Terra MODIS 위성영상을 이용하였다. SEBAL 증발산량의 평가를 위해 Penman-Monteith 공식에 의해 계산된 증발산량을 이용하여 비교하였으며, 그 결과 오차가 허용 가능한 10% 이내로 나타났다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.3
• /
• pp.105-114
• /
• 2010

This study considers and analyzes the position and area errors and the related problems through the experimental study of the converting process from the cadastral coordinate system to the global coordinate system. Also, based on the result, the points of improvement have been considered. According to the conversion of the coordinates in the study area, the standard deviations for the conversion of coordinates in regard to every parcel boundary point (478 points in total) have been calculated as X=0.0079m and Y=0.0153m respectively. It can be considered that such values are extremely excellent. Also, after analyzing the area errors, it has been found that there is a difference of $0.062m^2$ on average. Such a difference stays within the range of the allowable error tolerance specified by the current laws. Therefore, in regard to the limited area which is subject to the study, it can be concluded that the difference is not great in differences of the position or the area. As a result, the converting process into the global coordinate system is possible.

• Spatial Information Research
• /
• v.23 no.1
• /
• pp.59-68
• /
• 2015

As part of an effort to leap smart cadastre system by doing rearrangement of various mismatches in the land register, the cadastre renovation project is being recently conducted. In response to this demand, this paper proposes an image-based rapid parcel boundary demarcation plan using the high resolution aerial image with a GSD (Ground Sample Distance) of 5cm that matches to real ground boundary situation in residential area. To review the feasibility and accuracy of this proposed methodology, we compared the accuracy of parcel boundary point and parcel area extracted from the digital stereo plotting on the basis of results of cadastral boundary surveying and land register over the selected two test areas. The comparative accuracy result of all boundary points by digital stereo plotting is satisfied with accuracy requirement according to the criteria of the enforcement regulation of cadastral surveying, whereas it exceeded allowable error of ${\pm}0.07m$, more strictly specified in the Special Act on Cadastral Renovation. And about 20% of the total 70 parcels extracted by digital plotting are out of area tolerance in Jecheon study area, and 10% of the total 19 parcels in Suwon study area. The parcels exceeding accuracy limit are mostly due to the occlusion caused by building roof or eaves, and the obstacles such as trees existing on the boundary. Furthermore, an object identification is impossible in image because of vague boundary reference in case of nonexistence of man-made structures or natural features. Therefore, the utilization of boundary identification stickers is recommended as a solution for these types of land parcel.

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.2
• /
• pp.149-160
• /
• 2015

This paper suggests the MMAS(Map Matching using Additional Surveying) method to improve the cadastral discrepancy search algorithm that currently does not include corrections of mis-represented parcel data. The MMAS is a method to search for cadastral discrepancy after correcting mis-represented parcel data using nearby anchor points confirmed by surveys. The MMAS first transforms the coordinate system of the digital cadastral map by overlaying anchor points obtained in the field surveying process over the corresponding edges of buildings and facility points on the digital topographic map. Then, it searches for cadastral discrepancy by checking if the area differences exceed the tolerance limit. This method improves the current method for searching for cadastral discrepancy by performing the process after correcting extortion of the digital cadastral map. This helps to identify cadastral discrepancies that are not detectable within the distorted digital cadastral map. With our experiment, this method identified more discrepancies compared to the method without the correcting the distortion of the digital cadastral map. We believe this method will be able to help the national cadastral re-survey by identifying potential cadastral discrepancy more accurately.

• Journal of Korean Society of Forest Science
• /
• v.105 no.3
• /
• pp.342-350
• /
• 2016

This study aims to make the stand density management diagram which is very useful for establishing systematic management plan and obtaining management goal in Pinus densiflora forest. To estimate 5 models mainly composed of stand density management diagram, we used total of 1,886 sample plots having more than 75% of the total basal area of the pine trees in each stand. To test the goodness of fit, $X^2$ was computed with a significance level of 5%, and the acceptable error range as 20%. Also standard deviation of the model was $34.59m^3{\cdot}ha^{-1}$, minimum acceptable error range was 16.59% and coefficient of variation was 22.11%. If we use the stand density management diagram, it would be useful to establish the timber yield and thinning plan understanding the pathway of stand density management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.739-747
• /
• 2011

The paper presents implementation & evaluation of survey method with tilted transducer of Multi Beam Echo Sounder (MBES) to increase horizontal & vertical coverage over obstructed port environments with limited physical properties of MBES. Proposed method ($25^{\circ}$ titled transducer) have some discrepancy of bathymetric profiles between normal and tilting method, but we proved average difference is less than IHO Special Order requirements with survey data at port of Dong Ho Port, Masan, Korea. For horizontal mapping coverage of total survey area ($114,961m^2$), normal method covered 53%, $60,895m^2$ of total area but tilting method covered 75%, $5.933m^2$. It is 22% efficient than normal method with similar environments. For vertical mapping coverage of total vertical structure face ($7,421m^2$), normal method covered 14%, $1,046m^2$, proposed methods covered 60%, $4,450m^2$. And we adapt longitudal steel bar to validate MBES results, and provide calibration method with titled transducer of MBES.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.53-62
• /
• 2016

In recent years, UAV Photogrammetry based on an ultra-light UAS(Unmanned Aerial System) installed with a low-cost compact navigation device and a camera has attracted great attention through fast and accurate acquirement of geo-spatial data. In particular, UAV Photogrammetry do gradually replace the traditional aerial photogrammetry because it is able to produce DEMs(Digital Elevation Models) and Orthophotos rapidly owing to large amounts of high resolution image collection by a low-cost camera and image processing software combined with computer vision technique. With these advantages, UAV-Photogrammetry has therefore been applying to a large scale mapping and cadastral surveying that require accurate position information. This paper presents experimental results of an accuracy performance test with images of 4cm GSD from a fixed wing UAS to demarcate parcel boundaries in agricultural area. Consequently, the accuracy of boundary point extracted from UAS orthoimage has shown less than 8cm compared with that of terrestrial cadastral surveying. This means that UAV images satisfy the tolerance limit of distance error in cadastral surveying for the scale of 1: 500. And also, the area deviation is negligible small, about 0.2%(3.3m²), against true area of 1,969m² by cadastral surveying. UAV-Photogrammetry is therefore as a promising technology to demarcate parcel boundaries.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.621-629
• /
• 2011

According to the development of technologies for generating the 3D spatial information, the needs for producing and updating the precise 3D objects with LoD 4 level are increased. On the other hand, the needs for real-time updating of 2D digital maps are expanded, based on the execution of various GIS projects. These 2D informations can be extracted from precisely constructed 3D spatial information, to do this the feasibility studies on extraction of the 2D information from the 3D spatial information is needed. In this study, 3D objects are modeled using multi-oblique images, and the objects are stereo-plotted using digital airborne images, as well. Then the two data sets are compared and analyzed. The results show that the accuracy assessments fulfill the 1/1,000 digital map accuracy standard of regulations for photogrametric surveying of National Geographic Information Institute, but the shapes and the areas of building objects are different between two data sets because of the portrayal standards. Consequently, researchers can conclude that it is possible to generate the building layer of large scale topographic map using multi-oblique images, but additional researches is needed to resolve the problems on differences of the portrayal standards.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.163-180
• /
• 2020

In this study, to build a spatial information infrastructure, which is a component of a smart city, a 3D digital twin model in the downtown area was built based on the latest spatial information acquisition technology, the drone. Several analysis models were implemented by utilizing. While the data processing time and quality of the three types of drone photogrammetry software are different, the accuracy of the construction model is ± 0.04 in the N direction and ± 0.03m in the E direction. In the m and Z directions, ± 0.02m was found to be less than 0.1m, which is defined as the allowable range of surveying performance and inspection performance for the boundary point in the area where the registration of the boundary point registration is executed. 1: 500 to 1 of the aerial survey work regulation: The standard deviation, which is the error limit of the photographic reference point of the 600 scale, appeared within 0.14 cm, and it was found that the error limit of the large scale specified in the cadastral and aerial survey was satisfied. In addition, in order to increase the usability of smart city realization using a drone-based 3D urban digital twin model, the model built in this study was used to implement Prospect right analysis, landscape analysis, Right of light analysis, patrol route analysis, and fire suppression simulation training. Compared to the existing aerial photographic survey method, it was judged that the accuracy of the naked eye reading point is more accurate (about 10cm) than the existing aerial photographic survey, and it is possible to reduce the construction cost compared to the existing aerial photographic survey at a construction area of about 30㎢ or less.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.1
• /
• pp.80-93
• /
• 2016

Parcel boundary demarcation in agricultural area is commonly performed by terrestrial surveying methods, which have been pointed out as drawbacks to require consuming too much time and heavy expenditure. With the developments of high performance digital aerial cameras, however, studies on cadastral boundary demarcation with an aerial photogrammetric method attract a great attention in recent years. In this paper, an approach is presented to rapidly demarcate parcel boundaries coinciding with real ground ones in agricultural areas by extracting boundaries from the high resolution aerial orthoimages based on aerial targets. In order to investigate the feasibility of the proposed method, the accuracy of coordinates and area of parcel boundaries extracted from the aerial targets appeared in orthoimages compared with that of terrestrial boundary surveying results over the selected two test agricultural areas. Aerial image data were processed taken by a ADS80 digital camera with a GSD of 8cm in Changwon region, and by a DMCII camera with a GSD of 5cm in Suwon respectively. The result shows that the accuracy of parcel demarcation using aerial images is within the tolerance limits of coordinates and areas compared with that of terrestrial surveying. The proposed method using aerial target-based high resolution aerial images is therefore expected to be usefully applied in the agricultural parcel demarcation.