• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.2
• /
• pp.145-151
• /
• 2017

As an alternative to conventional explosive methods for demolition of concrete structures and rocks, the use of non-explosive demolition agents can be considered to reduce noise, vibration, and dust emissions during the demolition process. In this study, we conduct finite element analysis for crack initiation and propagation caused by the expansion of non-explosive demolition agents in square concrete structures. The predicted crack patterns are compared with the experimental results in the literature. The minimum values of the required expansion pressure of non-explosive demolition agents are also estimated, which depend upon the arrangement of non-explosive demolition agents and empty holes. Furthermore, we investigate the effect of empty holes on the fragmentation of concrete structures, and discuss the effective arrangement of non-explosive demolition agents and empty holes for fragmentation improvement.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.3
• /
• pp.269-277
• /
• 2017

In this work, as a preliminary experimental works, which focuses on utilizing separated pastes from activated (or radioactive) concrete as solidifying agents for radioactive waste immobilization, were performed. It was found that density of hydrated cement paste, which was lower than that of ordinary portland cement, increased as temperature for heat treatment increased. Highest compressive strength was observed with the specimens that was heat treated at $600^{\circ}C$. However, heat treatment over $700^{\circ}C$ showed higher CaO content that caused higher heat of hydration after in contact with water, lows of workability, and lower strength. Based on experimental results, it is suggested that $600^{\circ}C$ heat treatment is more appropriate for waste cement paste to be used as a solidifying agent.

• The Journal of the Korea Contents Association
• /
• v.3 no.2
• /
• pp.1-10
• /
• 2003

A semiotic approach to modem visual arts has emerged since French post-structuralism was introduced to Anglo -American academics by "deconstruction" or "postmodemi sm." It views a work of art as a sign, which is its math odical assumption and, at the same time, makes its appli cation more accessible. In the milieu of modem visual arts' effort to be intimate with general audience, modem art photography is now fared with the request to be a familar and universal domain, instead of being left only in photo books as artistic and academic achievements. More specifically, various photo images puter graphics to such megaexhibitions as "Gwangju Biennale,. "Media City Seo ul," and "Pusan International Art Festival," are main objects of study. A coherent and scientific analysis of visual semitotics is still on the way, however, it is an urgent task how to read and interpret a photo image with multiple meanings. This study argues that visual seniotics can be a powerful tool to enhance the understanding of art photography. After all, seniotics is a product of age； we live in the age of legibility, that is, of reading the work of art well as the social events and phenomena. art well as the social events and phenomena.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.683-692
• /
• 2023

This research assesses the mechanical properties of concrete, utilizing both normal and lightweight aggregates, through measurements of compressive strength and ultrasonic pulse velocity. The study observed that concrete with normal aggregates exhibited higher compressive strength in its initial stages, whereas concrete with lightweight aggregates showed increased strength over time, likely attributed to the higher water absorption rate of lightweight aggregates. Ultrasonic pulse velocity generally registered higher in normal aggregate concrete, barring a specific duration, presumably due to variations in the internal pore structure of the aggregates. The correlation coefficient(R²) for the strength prediction equation, derived from the relationship between compressive strength and ultrasonic pulse velocity, exceeds 0.95. This high correlation suggests that the predictive equation based on these experimental findings is a reliable method for estimating concrete strength.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.321-326
• /
• 1998

폐콘크리트양은 건설폐기물 발생량의 약 50%정도인 연간 약 500만톤 이상으로 추정하고 있다. 따라서, 건설폐기물인 폐콘크리트에 대한 적절한 기술적 처리와 재활용 시스템이 구축된다면 도로포장 및 기타 포장 하층노반재료, 재생 입도조정쇄석, 건축물의 기초재, 토목 구조물의 기초재, 공작물의 되메우기 재료 등으로 활용될 수 있어 폐기되어버릴 단순한 쓰레기가 아니라 오히려 재활용 용도를 적극 개발하여야 할 중요한 자원이라고 볼 수 있다. 본 연구의 목적은 여러가지 건설 폐기물 중에서도 재활용 가능성이 높으며 구조물 해체시 다량으로 얻어지는 폐콘크리트를 대상으로 건설공사에 재이용하기 위해 폐콘크리트 골재를 사용한 재생콘크리트의 공학적 특성을 실험을 통해 검토하고자 하는 것이다. (중략)

• Journal of Industrial Technology
• /
• v.24 no.B
• /
• pp.19-29
• /
• 2004

The demand for demolition of steel structures is recently increasing in Korea. Most of flexible linear-shaped charges(FLSC) for steel demolition are now imported from foreign countries. Some basic experiments have been studied to determine the optimum parameters of design for domestic development of FLSC. Domestic FLSC were used to check cutting of steel structures and other materials in this study. The result shows that domestic FLSC is very effective to cut steel structures.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.97-100
• /
• 2008

In order to recycled wast concrete which is occurred from demolition of the old building, it is effective that the recycled aggregate used as structural concrete aggregate. For used recycled aggregate with structural concrete, the structural capacity must be confirmed. This Study investigated bond capacity which follows in difference of absorption of the aggregate between rebar and concrete. Test results show that there are not a difference of bond strength and slip behavior according to absorption ratio of natural and recycled coarse aggregate.

• Tunnel and Underground Space
• /
• v.6 no.3
• /
• pp.260-266
• /
• 1996

Safety concern is one of the most important parameters in the design of explosive building demolition. Laboratory experiments were performed to investigate the failure behaviour of concrete columns and the effects of protection materials. Fourteen reinforced columns with two sizes were constructed and the effects of protection materials were tested for two kinds of materials: non woven fabrics and wire net. The results showed that control of gas effects is a key to the control of flying chips. It was recommended to use both wire net and non woven fabrics as primary and secondary protection materials. Such protection method was successfully applied to the explosive demolition of 16 and 17-strory apartment buildings.and the results of a simulation on a model tunneling workings using diesel equipments are introduced. In case of typical model of tunneling face, the gas concentration of human height is about one third of roof concentration and right side half of the tunnel shows better environment than left half. NOx concentration of workings can be estimated about 0.45ppm which is much lower than permissible level(5 ppm).

• Archives of design research
• /
• v.13 no.4
• /
• pp.43-56
• /
• 2000

The purpose of this thesis is to investigate about the various metamorphosis methodology, which is one of the specific skill being used widely in contemporary metal-craft. Even though this methodology is being investigated actively in the other genre, it is not easy to find the example and various experimentation for further expression than in metal craft. The metamorphosis had been dealed little by little before the metal-craft is being modernized. Recentely, the experimentation is more deeply and widely held; because the deconstruction methodology, which is the skill to express the differance in the meaning: material's archetype and dealing with the symbol and metaphorical meanings concealed, is being developed. The special skills of the metamorphosis are Mokumegane, reticulation, Fusing, and electro form Mixed Media metamorphosis; these investigation is being further developed with metal alloy methodology.

• Explosives and Blasting
• /
• v.23 no.4
• /
• pp.45-55
• /
• 2005

일반적 의미의 성형폭약이라 함은 폭약 중에 빈공간이 존재하여 표면쪽으로 개방되어 있는 한덩이의 고폭약을 말한다. 이런 이유로 절단 단면의 형상은 주로 V 자형을 이루고 있으며 보통 V자의 뽀족한 부분이 기폭부분이 된다. 성형폭약은 그 생김새를 기준으로 크게 2가지로 나눌 수가 있는데 원뿔형과 선형이 그것이다. 원뿔형 성형폭약은 그 초기 발전단계부터 군용 대장갑용으로 명성을 떨쳤으며 현재에도 많은 연구가 진행되고 있는 상태이다. 이에 비해 선형 성형폭약은 철구조물 해체나 여러 용도의 민간/상업용 절단도구로 많이 쓰이고 있는데 두 번의 세계전쟁을 치루며 엄청난 규모의 물질적 인적 지원을 바탕으로 발전한 원뿔형 성형폭약에 비해서 턱없이 연구실적이 부족한 상태이다. 이 논문에서는 일반적인 선형 성형폭약의 관통력에 대한 연구가 아닌 기능적 측면에 대한 연구결과를 서술하며, 기능적 측면상 중요한 몇 개의 항목에 대한 수량화, 정의 및 연구가 이루어진다. 그 항목으로는 발전거리(run up distance), 이격거리(stand off distance), 기폭위치에 따른 절단모양, 파편 분간 형상 등이 있으며 각 항목에 대한 하류 항목들은 본문에서 다루어진다. 모든 실험은 University of Missouri-Rolla, Rock Mechanics and Explosives Research Center 에서 이루어 졌으며 대부분의 실험은 500grain/ft 선형성형폭약을 사용하여, 기폭 후 철제목표물을 관통한 형상 및 관통 단면을 관찰하는 형식으로 이루어졌다.